Chiksan Swivel Joint

Description
Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.

Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.

Standard chiksan joint/chiksan swivel joint
Product description
1).Size: 2'', 3'', 4''
2).Working pressure:6000-20000psi(42mpa-140mpa)
3).Working temperature: -29°c~121°c.
4).Application enrvironment: standard or h2s
5).Standard: api standard

1 our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa.

2 various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa).

3 we can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.

4 patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.

5 all sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment.

6 sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.

7 usually good lubrication can ensure that swivel joints work normally without much maintenance.

Specification:

1).size: 2'', 3'', 4''
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29°C~121°C.
4).application enrvironment: standard or H2S
5).Standard: API standard

Introduction:

1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.

2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).

3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.

4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.

5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.

6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.

7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

Specification:

1).Size: 2'', 3'', 4''
2).Working pressure:6000-20000psi(42mpa-140mpa)
3).Working temperature: -29â°c~121â°c.
4).Application enrvironment: standard or h2s
5).Standard: api standard

Introduction:

1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa.

2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa).

3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.

4. Patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.

5. All sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment.

6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.

7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

Specification:

1).size: 2'', 3'', 4''

2).working pressure:6000-20000psi(42Mpa-140Mpa)

3).working temperature: -29°C~121°C.

4).application enrvironment: standard or H2S

5).Standard: API standard

Introduction:

1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.

2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).

3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.

4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.


5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.


6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.


7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

We are leadding manufactrer and exporter of Brass and Metal swival ball joint.

í+ recommended operating specifications
1. Max. Hydraulic pressure : 210 bar (50rpm)
2. Max. Air pressure : 10 bar
2. Max. Temperature : 100ój
3. Max. Speed : 750rpm
í¦ all models available with the following options
1. Shaft : alloy steel
2. Housing : alloy steel
3. Standard threads : rc

1. High quality rotary joints and two delicate bearing installed in high stiffness rotor are to ensure vibration-free performance in long-term operation.
2. Rotors undergo special heat treatment to increase stiffness.
3. Stationary ring enclosure is made out of concentrated carbon graphite, anti-wear-out, waterproof, and suitable for dry operation.
4. Especially the area of rotating sealing faces has to be minimized to the minimum, even under higher-pressure environment.
5. The effect of equilibrium in sealing face from accumulation of our company experiences in mechanics is the best.
6. Adaptation of stationary ring made out of bronze in RF-type rotating connector is for the use in high-pressure 200 bar.