Copper Flats

In annealed, half hard, and full hard condition

Sizes:width-20mm to 150mm, thickness-5mm to 25mm
Sharpness: 1, with sharp edges 2, with round edges 3, with full radius

Range (size in mm) : width : 4 -80
Thickness : 1 - 75

We are an exporter and stockist of copper bars.
Ready stock is available in E.C. grade up to 250 mm in width and 150 mm in thickness, depending on the width of the bar.
If you needed something in certain dimensions or length, we would be happy to accommodate your needs.
For further information, get in touch with us or visit our website,

Product Description
 Flat/Round Shape Flexible pure copper bus bar and electric bus bar

electrical panel bus bar
Copper flat bus bar C11000 C11200 , copper electric bus bar 

Item 
Bronze Rod, Copper bar ,copper rod ,Brass bar,brass rod 

Material  T2,T1,TP2,TP1,TU2,C1011,C1200,C12200,C10400,H90,H70,H68,H65,H63,H62,C2200,
C2600,C2620,C2700,C2720,C2800,C68700,C51900,C77000,C75200,C11000,etc.
Standard  GB/T2059-2000.GB/T2067-1980,GB/T2069-1980,GB/T11089-1989.JISH3100-2006,etc
Diameter  3mm~300mm
Length  5.8m,6m,2m-6m or as required
Application  Copper bar is widely used in boat building,War industry, Car industry and communication 
industry where the components need good wear proof and great corrosion resistance 
Contact 
If you have any question,please feel free to contact me .

 Advantages:

1. Good wear resistance;

2. High intensity;

3. Hot Forging performance;

4. Good cutting performance;

5. Self-lubricating performance



Application:

1. It is widely used in boat building, War industry, Car industry and communication industry where the components need good wear proof and great corrosion resistance.



2. It is widely used in self-lubricate axletree field.



3. Many used in connector assembly, lock, fastener and spring.



Identity:

1. Good wear proof, and great corrosion resistance

2. Hi-hardness, hi-tensile strength, good wear proof and good corrosion resistance.

3. Good elasticity and electricity conductivity. Good anti-oxidation and corrosion

Product Introduction: Vertical winding has temperature-resist grade of C level or above, it satisfies various types of vertical winding, working temperature of long term use is 220. This product is suitable for transformer, electromagnet, electric welding machine and other similar equipment.
Executive standardGB/T7095-2008
Production range
Vertical winding
Narrow edge size a:0.50mm5.00mm Narrow edge size b:3.00mm16.00mm
Recommended conductor width ratio 1.5b/a7.5
If specifications beyond the above range, please contact us
product categories
â?² 220 class polyamideimide enamelled rectangular copper vertical wire
Please contact us if chose other types of enamelled wire
Materials
copper strap wire should be compliant with GB5584.2-2009,specific resistance is not more than 0.017241Ωmm2/m at 20.
Film thickness of enameled flat copper wire should be in accordance with the following Table,
Please contact us if film thickness is specially required.

Product name: double glass silk covered wire.
Low product introduction: glass silk covered wire is according to customer requirements, even on the copper (aluminum) conductor winding and 1 to 2 layers of alkali-free glass fiber, with the required heat resistance index and compatibility of dipping, baking varnish, and between the glass fiber, glass fiber bonding between conductor into a whole, at present the product of heat resistance index, 130, 155, 180 at three levels, with an average of 20 insulation thickness,30,40,50 four grades.
This product is widely used in transformer, electromagnet, welding machine or other similar electrical equipment product winding.
The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of glass filament copper (aluminum) wire.
Standard: GB/ t7672-2008.
Production scope:

Aluminum flat wire
Narrow side dimension a:1.00mm -- 6.30mm.
Wide side size b:3.00mm - 25.00mm.

Copper flat wire
Narrow side dimension a:0.80mm -- 5.60mm.
Wide side size b:2.00mm - 16.00mm.

Copper aluminum round wire
Diameter: 1. 1.
Please contact us if you choose the above range.

Low material:
Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 Ω was/m
Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 Ω was/m
Low glass should be closely evenly around the conductor, double glass package copper (aluminum) line of two layers of glass wool around the package direction should be the opposite, and the double glass package copper (aluminum) flat wire insulation thickness should comply with the following table, narrow at the edge of the insulation thickness (B - B) do not make the inspection.

Enamel Coated Round/Flat Wire

Enamelled aluminum wire is a type of winding wire made by electric round aluminum rod which drawn by dies with special size, then over coated with enamel repetitiously.
Enamelled Aluminum Wire is a fundamental part of a winding in every electrical machine or apparatus. Compared to fibrous insulation, enamelled aluminium wire offers a favourable space 
saving factor together with a high level of breakdown voltage.
The main application of Enamelled Enamelled Aluminium wire is in winding of Motor and Transformers.

OHFC, ETP, DHP, DLP.

Various dimensions of stock. Flat bars, rods, hexagon bars, all available.

Width: 10-200 mm
Thickness: 2-80 mm
Rectangle/rounded and tinned optional.
OEM service

Massive stock in the warehouse, welcome your any inquiry.