48V - 12V Battery Charger

Product Brands: ABC, ABC Alkaline.
Available Variants: AAA, AA, C, D, 9V

Product of Indonesia

Input: 110V/220V, 47-63HZ
Specification: DC12V10Amp
Constant Charging Voltage: 12V
Constant Charging Current:10A
Charging Mode : 3 Stages, CC, CV, Trickle
Material: Aluminum alloy with Fan
Dimension: 135*90*50mm
Net Weight :0.7kg
Application: Electric Vehicles & Tools Various Car Motorcycle Trucks Ships Lawn Mower RV ATV etc.
Protection: Over-current, Over Voltage, Over Temperature, Short Circuit, and Reverse Polarity. Products can be Customized!

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Battery charger for all type of industrial battery
1. Thyristor base
2. Smps base

Rane from 5 amp 24vdc to 2000 apm

Iec

Place of Origin: Guangdong, China (Mainland) Brand Name: VIKLI Model Number: 48v 25ah LiFePO4 Battery Type: Li-Ion Nominal Voltage: 48V Size: Can be customize Nominal Capacity: 25Ah Model: 48v 25ah LiFePO4 Battery Max. charge voltage: 58.4V Discharge cut-off voltage: 40V Standard charge current: 7.5A Standard discharge current: 12.5A Warrenty of lifepo4 battery: 1 year Cycle life of lifepo4 battery: >1500 Times Weight: 10.5Kg Storage temperature: 0°C-25°C less than 1 year Storage humidity: 25-85% RH
Packaging & Delivery

Packaging Details: Carton / Wooden case
Delivery Detail: Shipped in 30 days after payment
48v 25ah LiFePO4 Battery For Industrial Equipment



Features
1) Lithium iron Battey with high capacity, light weight, high consistency, high security.
2) LiFePO4 battery pack 48V 25Ah with long cycle life > 1500 times.
3) No memory effect, environmental friendly
4) High gravimetric specific energy, high volumetric specific energy, good deep discharge capacity.
5) LiFePO4 battery pack can be customized. Cells can be combined in series to increase voltage and parallel to increase capacity.








Specificaiton Of 48v 25ah LiFePO4 Battery
LiFePO4 Battery Cell
Model
EV GLP 25Ah-94166227
Capacity(0.5C)
25Ah
Rated voltage(V)
3.2V
Typical Impedance (mO)
=2.5 mW
Battery material
LiFePO4
LiFePO4 Battery Pack
Combination method
1P16S
Minimal capacity
25Ah
Nominal voltage
51.2V
Max. charge voltage
58.4V
Discharge cut-off voltage
40V
Max continuous discharge current
(2C)50A
Max discharge current
(3C)75A
Standard charge current
(0.3C)7.5A
Standard discharge current
(0.5C)12.5A
Weight (Approx.)
˜10.5Kg
Max. dimension(L×W×H)(mm)
=Can be customized

Operating temperature
Charge temperature
0?~45?
Discharge temperature
-20?~55?




Application



Our Partners





Our Factory





Packing & Shipping
Packaging: Paper Packaging and Wooden Packaging for DG.
Shipping:By Sea; By Air; EMS

CTEK battery charger for car, commercial vehicles off road vehicle and motorcycle. Jump starter, Foxwel OBD scanner.

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking
6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation.
Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps.
Multiple functions- Alternator state check, battery state check, Battery overload display
With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking
6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation.
Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps.
Multiple functions- Alternator state check, battery state check, Battery overload display
With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.