A. As for the fluting type which can be connected with e-b-c-a-f-g flute, we also can make any type of the flute and cut-off size for the machine that customer required.
B. Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system.
C. Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping.
D. The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control.
E.Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue.
F. The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop.
Price, delivery time, moq are negotiable, please contact us for quotation.
This machine is a hydraulic three-roller bending machine and used to do pre-bending the end of plate, rolling it into round, cone and other shapes.
The brief introduction of movement of upper and bottom roller
Upper roller can do both level movement (move from left to right) and vertical movement (move from up to down).
Bottom roller is fixed. It just does rotation clockwise and counterclockwise.
Pre-bending is achieved by horizontal movement of upper roller and presses the end of plate .High precision pre-bending, freely control the straight side of plate.
Rolling round, it is achieved by means of the motor and reducer to drive two bottom rollers.
The tipping device is very flexible, which make the roller plate material can be got off easily.
The support roller improves the precision of rolling process, which can make rolling process more smoothly and perfectly.
W11 series mechanical plate rolling machine
Maximum thickness(mm):4
Maximum width for rolling(mm):1500
Plate yield limit(mpa):245
Rolling speed(m/min):6.5
Minmum diameter(mm):300
Upper roller diameter(mm):150
Bottom roller diameter(mm):140
Center distance of two lower rollers(mm):185
Main power(kw):4
Dimension(l*w*h)mm:3110*950*1030
Feature of CNC 3 roller plate bending machine/ 3 roller plate rolling machine
1. CNC 3 roller plate bending machine/ 3 roller plate rolling machine's upper roller can move vertically or horizontally and is hydraulic driven. The CNC 3 roller plate bending machine/ 3 roller plate rolling machines are driven by worm and gear.
2. CNC 3 roller plate bending machine/ 3 roller plate rolling machine's lower rollers are driving rollers and the upper roller is the driven roller.
3.The surface of the rollers of the CNC 3 roller plate bending machine/ 3 roller plate rolling machine is polished.
4.Pre-bending function of the CNC 3 roller plate bending machine/ 3 roller plate rolling machine is available.
5.The CNC 3 roller plate bending machine/ 3 roller plate rolling machine is PLC controlled and there is a LCD to show all the roller position.
6.The CNC 3 roller plate bending machine/ 3 roller plate rolling machine equipped with movable control panel, the CNC 3 roller plate bending machine/ 3 roller plate rolling machine can be controlled at any position around it.
7.The reversal side of the CNC 3 roller plate bending machine/ 3 roller plate rolling machine is hydraulic driven.
8.The CNC 3 roller plate bending machine/ 3 roller plate rolling machine is designed with supporting rollers under the lower rollers, thus helping improve the bending accuracy.
9.Optional components and devices like conical device and side and top plate
Parameters of CNC 3 roller plate bending machine/ 3 roller plate rolling machine
Model pre-bend thickness max.bend thickness max.bend length min.bend diameter up roller diameter bottom roller diameter motor power
6*2000 4.5mm 6mm 2000mm 380mm 190mm 125mm 3kw
8*2000 6.5mm 8.5mm 2000mm 450mm 220mm 135mm 4kw
8*2500 5.7mm 8mm 2500mm 500mm 235mm 135mm 5.5kw
10*2000 7.5mm 10mm 2000mm 500mm 235mm 135mm 5.5kw
12*2000 10mm 12mm 2000mm 600mm 250mm 145mm 7.5kw
Note: Customerized acceptable
Feature of CNC 3 roller plate bending machine/ 3 roller plate rolling machine
1. CNC 3 roller plate bending machine/ 3 roller plate rolling machine's upper roller can move vertically or horizontally and is hydraulic driven. The CNC 3 roller plate bending machine/ 3 roller plate rolling machines are driven by worm and gear.
2. CNC 3 roller plate bending machine/ 3 roller plate rolling machine's lower rollers are driving rollers and the upper roller is the driven roller.
3.The surface of the rollers of the CNC 3 roller plate bending machine/ 3 roller plate rolling machine is polished.
4.Pre-bending function of the CNC 3 roller plate bending machine/ 3 roller plate rolling machine is available.
5.The CNC 3 roller plate bending machine/ 3 roller plate rolling machine is PLC controlled and there is a LCD to show all the roller position.
6.The CNC 3 roller plate bending machine/ 3 roller plate rolling machine equipped with movable control panel, the CNC 3 roller plate bending machine/ 3 roller plate rolling machine can be controlled at any position around it.
7.The reversal side of the CNC 3 roller plate bending machine/ 3 roller plate rolling machine is hydraulic driven.
8.The CNC 3 roller plate bending machine/ 3 roller plate rolling machine is designed with supporting rollers under the lower rollers, thus helping improve the bending accuracy.
9.Optional components and devices like conical device and side and top plate
1. The decoiler is integrated with straightener, covering a small area, reduce the transition link in the straightening process of precision materials and maximize the performance.
2. The decoiler and straightener controlled separately by independent electric box, and with its own frequency converter, make everywhere running smoothly, protect the machine more effectively, avoid the distortion affected by various external forces.
3. The straightener is drive by universal joint, full gear drive, avoid the material damage caused by the passive rotation of the upper rollers effectively.
4. The straightening roller with dial indicator, can find leveling point quickly.
5. The addition of the back roller enhances the rigidity of the straightening rollers and makes the straightening effect better.
6. The addition of the system increases the using life of the machine.
Mechanical Plate Rolling Machine
1. The Feature of Mechanical Plate Rolling machine :
 TMA-professional Plate Roll Machine is widely used in chemical industry, Cement, shipbuilding, boiler, aviation, water control project, Power Transmission Tower, metal structure and the industry of making machinery. Its working principle is rotating bending deformation. For the upper roller can be moved no matter up and down, but also horizontally, so no need additional press or equipment, can realize bending, as well as correction of the workpiece.
2. The whole structure of Mechanical Plate Rolling machine :
 The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the unt, the worm and the lead screw.
 The two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers.
 adapted for bending metal plate into round, arc, and so on. Its working principle is rotary bending deformation.
3. The Feature of Mechanical Plate Rolling machine :
 The machine adopts 3-roller asymmetrical structure with the upper roller as the main drive and the lower roller making vertical movement so as to clamp the plate materials tight. The machine drive comes from the engagement between the gear of the lower roller and the gear of the upper roller.
 The machine is the most precise 3-roll machine in its category. The RGS design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.
 The Ultra wide roll support with lubrication circuit is mounted within linear slides to prevent wear and tear.
 The very high rotation power is a guarantee of the Machine superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by Gear and gearboxes directly coupled to the rolls shafts.
4. Configuration of Hydraulic Plate Rolling machine is follows:
 Main power: Siemens Electrical made in Germany
 Main electronic elements: Schneider made in France;
 Axletree: Double-row self-aligning bearing from Germany
 Main motor: Siemens Electrical made in Germany
 Programmable logic controller PLC: OMRON products from Japan
 Automatic lubrication system: Sino-Japanese joint, which has block alarm
