Fep Film

Polyimide fep film (kypifep) is polyimide film coated with fep(f46) resin on one side(fh) or double sides(fhf) through the sintering process at high temperature, which combines the excellent properties of polyimide film and fep(f46) resin, high& low temp resistant, radiation resistant, excellent electrical properties, superior dimensional stability and heat sealable properties. It performs successfully in the wide range of temperature as low as -112f(-80c) and as high as +500f(+260c), widely used for insulation in motor, electrical apparatus and wrapping of cable and magnet wire. It can be melt and formed soon as desired at defined temperature.


Carton

Polyimide film is synthesized by polymerizing pmda and oda in strong polar solvents through the process of forming film and imine treatment at high temperature, which possesses excellent physical, chemical, and electrical properties, atomic radiation resistant, solvent resistant, low & high temperature resistant, it performs successfully in the wide range of temperature as low as -452f(-269c) and as high as +752f(+400c).
Polyimide film coated fep resin is uesd for magnet wire in oil pump which is similar to fn019 and fn919. Any further information , please kindly contact us.

Company Introduction:
Shandong Xinhongyun New Material Technology Co., Ltd.Located in weifang city, shandong provience., is a ISO certified professional & reliable manufacture of electrical insulation materials-BOPI FILM(polyimide film). our annual prodcution capacity is 150-200MT.main thickness 12.5um,25um & 50um, main width 514mm,520mm,1028mm&1040mm.main color: yellow, red, matte black.
we have strict quality inspection system ,we trust we can supply you best quality product with high quality

Description
Polyimide (PI) is a polymer of imide monomers, aslo know as heat resistant film or high temperature film. With their high heat-resistance, polyimide enjoys diverse applications in roles demanding rugged organic materials.� Polyimide film� is ideal for insulating circuit boards, high temperature powder coating and transformers manufacturing.
Polyimide film provides excellent electrical, thermal, physical and chemical properties over a wide temperature range between -269ºC (-452F) and 40ºC (752F) making them superior for electrical insulation applications Polyimide film can be laminated, metalized, punched, formed or adhesive coated. BOPI film has better thickness tolerancem,highter physical, chemical,and electrical properties. It� is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of� temperatures.
we can provide both standard and custom polyimide film solutions for a customer depending on their needs.

Slitting and Packging
Width:520mm~1040mm
Core ID:76mm(3'')or 152mm(6''),Core materials:Paper or plastic
Packaging:PE film packaged,with aluminum foil and foam,Suspended packing.
Storage:The film should be stored in a dry and clean indoor,should be suspended in the box. Should not erect,close to the fire,heat or direct sunlight.

Applications
Wire&cable Insulation, slot liner insulation,interlayer insulation in Motor,transformer etc.
Backing material for Polyimide coating or composites
Flexible Printed Circuits Board(F-PCB)
Polyimide Label
Polyimide tubing

We have developed ITO conductive film with high tranparency,ITO film for flexible LED SMD panel,and decoration glass.

General Specification:
Film thickness:0.05,0.075,0.1,0.125,0.175mm
Film width:610,820,1220mm
Sq resistance:60,100,200 ohm
Light trans:>80%,

ITO film for LED decoration glass

After a number of experiment, prochema has succeeded to light up the led smd with 100 ohm/sq ito film. 100 ohm ito has better light transmittion and good conductivity. This sheet will be laminated between glass as decoration in house or shop window.

Prochema supplies 610mm, 820mm, 1220mm wide ito film and necessary tech support.

Product features
, based on our proprietary ir management plastic technology, witlan irf series ir pass plastic film is transparent to 800-1600nm ir wavelength, while blocks 300-700nm uv and visible light.
, witlan ir pass film is dark or black colored and different thickness (0.05mm, 0.25mm, 0.50mm & 0.80mm) available.
Applications
, witlan ir pass film is used as ir window or visible light shielding for various applications such as ir surveillance devices, cameras, instruments, lasers, and various other optical devices.

Main features:
High light transmittance, uv light through rate reach 92%, shorter curing time, better curing effect, higher print accuracy.
More durable, release more than 30, 000 times (refer to the printed page);

Be suitable for a variety of types of uv curing light 3d printers.
Size a: peel off the protective film directly from the 3d menbrance, and then stick the base layer on the glue tank, instead of using a silicone membrane, it is more convenient to use.
Size b dont have back glue, so it need glue tank around a fixed at the bottom of the device.
Size: 210 * 290 mm