Silicone Rubber For Crafts Molding

Silicone rubber for mold making is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

25kg/drum and 200kg/drum

Introduction of rtv 2 molding silicone rubber:
1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst.
2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours.
Features of rtv 2 molding silicone rubber:
1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability.
2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage.
3. Rtv 2 molding siliconerubber has high duplication times.

Operation step for rtv 2 molding silicone rubber:
1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly.
2. Step two to use rtv 2molding silicone rubber: vacuum pumping
3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation.


25kgs/drum vacuum package or 200kgs/drum

Silicone rubber with vacuum casting
Silicone Rubber Molding,China Silicone rubber with vacuum casting
Mold silicone, specially used for large-scale reproduction of resin, ceramic, plastic, gypsum, cement, candle, soap and other crafts, with high number of times of mold overturn, long service life of the mold, resistance to burning and high temperature, strong resistance to tearing.
First, crafts mold silicone use crafts mold silicone, specializing in resin, ceramics, plastics, plaster, cement, candles, soap, lighting and other handicrafts mass reproduction, addition molding and condensation type are suitable for handicraft mold, is an RTV Curing silicone rubber at room temperature. Second, resin crafts mold silicone advantage

Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals. Our tin-cured silicone systems are

the most economical. They are best used for casting resins and low melt metals.

Model530
Colorwhite
Mixing ratio (%)2%
Pot life (mins, under 2530-40
Curing time(hrs, under 25)3-4
Hardness  ( shore a )30±2
Tensile-strength  (mpa)4.2
Tear-strength (kn/m)26±2
Viscosityafter a/b mixed , mpa.S27000±2000
Shrinkage rate (%0.2%
Elongation450

Various properties about excellent liquidity, good work-ability, good tensile?force, with no deformation, heat resistant, acid and alkali resistant. Can be used repetitively. 2.Specification Silica gel is mixed with curing agent, the appearance of molding silica gel is liquid, A substitutes silica gel, B substitutes curing agent. For example, 100g A add 2g curing agent, but it needs to note, A and B must be mixed averagely, if not, the molding will not cure completely, and heterogeneous silica gel can affect its life time and result in that the molding will be completely scrapped.



Packaging by airtight polyethylene drum.

Manual molding silicone rubber is mainly used for model design of manual mold, pvc plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, electronic equipment antivibration, etc.

25kg/drum and 200kg/drum

Shoe mold silicone rubber
A. Mainly used for shoe soles mold making
B. Two-component silicone rubber with tin-catalyst
C. Cured under room temperature
D. Low shrinkage
E. Excellent fexibility & easy demould
Shoe mold silicone rubber applications
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
Shoe mold silicone rubber features:
A.Two-component silicone rubber with tin-catalyst
B.Cured under room temperature
C.Low shrinkage
D.Excellent fexibility & easy demould
Shoe mold silicone rubber using instruction:
The component a of shoe mold silicone rubber is white flowing liquid and the component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Notes:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried


25kgs/drum vacuum package or 200kgs/drum

Mold making silicone rubber is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. any more information, please feel free to contact.


25kg /drum 200kg /drum