Plaster Coating Laminating Machine

Main parameters:

Model300575 10921575
Coating width300mm600mm1100mm1600mm
Coating weight20-200g/m220-200g/m220-200g/m220-200g/m2
Production speed0-150m/min0-150m/min0-150m/min0-150m/min
Magnetism powder clutch2.5n.M5n.M10n.M20n.M
Winding power5.5kw moto7.5kw moto11kw moto20kw moto
Winding diameter1000mm 1000mm 1000mm 1000mm
Machine oversize2.51.11.5(m)8.61.52.2(m)9.62.52.2(m)9.63.22.2(m)

Applications:

Coating and laminating machine is suitable for high viscosity & high melting point sheet materials applications, eg pa, pu, pes, eva, tpu, po, etc.
Advantages
1.Scientific designed, featuring with strong rigidity & easy operation. Time belt driving parts adopted, all active & passive rolls rectified by high-precision dynamic balance treatment.
2.Main board treated by cnc processing center, with reasonable technique flow, to ensure whole machine running more stable with low noise, the material is no shrivel and high-quality.
3.Emergency stop buttons and control panels are installed on several prominent positions, convenient to operation.
4.Visible signs, marks and safeguard (emergency stop button, protecting switch) are provided on potential danger point, guarantee operators security.


Applications:
Coating and laminating machine is suitable for high viscosity & high melting point sheet materials applications, eg pa, pu, pes, eva, tpu, po, etc.

Construction Concept - Our machine is designed on the principle of modular construction suitable for extension with coating machine. This machine is an efficient converter, which handle web material or substrates like BOPP, Polyester, Paper, Cellophane, PVC, Aluminum Foil and other allied materials from 10 microns to 120-micron thickness. The frame is made on heavy M.S. body to avoid the vibration.
Surface Coating Unit - There is one coating unit consisting of one roller (adhesive pickup roller) one rubber roller (pressure roller) . There is one doctor blade attachment complete with reduction gearbox and fine setting of ink for printing and lacquer coating. One adhesive tray will be provided with up and down adjustment. One dancing roll will also be provided to take care of any uneven feeding or gauge variation. Two Unwinding station having Pneumatic operated air shaft with cantilever type with mechanical spring tension brake, guided with Pnumo hydraulic edge control system for feeding adjustment etc.
Drying Chamber - M.S. roller with hard chromed drive roller with double bearing provided for smooth and scratch less running of the film driven with timing belts through out the chamber. Consists of aluminum rollers, One Side Window to inspect the film and 3â?? thick glass wool to prevent the heat outgoing. 1 HP AC KIRLOSKAR MAKE blowers on heating zones will be provided. The hot air from heating box is uniformly blown at different position ensuring the equal airflow on the film. The total length of Drying Chamber 25 feet.
Lamination Winding Unit - Lamination unit consist of one steel roller, rubber roller for pressure, idler roller, center winding with one shaft with cones, slipping clutch.
Basement - Heavy-duty basement will be provided to avoid the vibration.
Control Board - Control board having digital temperature indicator, DC motor control for unwind and rewind, web guide starters and blower start and all other standard accessories.

High definition, strong gloss, environmental protection, good toughness, moisture proofness, no deformation, no bubbles and so on.
1.Specially designed for album manufacturers
2. It gives a smooth & even layer of uv coating on the picture with more transparent, glossy, scratchproof & waterproof result
3.No deformation, no bubbles
4.Production cost just 0.4-0.7rmb/square meter
5.Conveyed by stainless steel mesh belt, durable without deviation
6.Power:220v 4500w
7.Size:1800*950*1200.


Export wooden case

- Our machine is designed on the principle of modular construction suitable for extension with coating machine. This machine is an efficient converter, which can handle web material or substrates like BOPP, Polyester, Paper, Cellophane, Non Woven, Aluminum Foil and other allied materials from 12 microns to 150- micron thickness. The frame is made on heavy M.S. body to avoid the vibration. The first unwind device is jointed of quadrate steel, groove steel and iron steel and the main machine frame adopts 25mm steel plate and steel tube to brace. Driving-shell adopts 1.5mm armor plate. The second un-winder and re-winder are installed in the main frame.

Technical Details:-
Base Unit :- The Machine is designed on the principle of modular construction suitable for extension with coating machine. This machineis an efcient converter, which handle web material or substrates like BOPP, Polyester,Paper, Cellphone, PVC, Almunium Foil and otherallied materials from 10 microns to 120-micron thickness. The frame is made on heavy M.S. body to avoid the vibration.Coating Unit :- There is one coating unit consisting of one roller (Adhesive pickup roller) one rubber roller (Pressure roller) driven by 1HPDC motor and reduction gearbox. There is one doctor blade attachment complete with reduction gearbox and ne setting of ink for printingand lacquer coating. One adhesive tray will be provided for up and down adjustment. One dancing roll will also be provided to take care ofany uneven feeding or gauge variation. Unwinding station having one saft with taper cones, spring tention clutch / brack, side adjustment etc.Alumunium Cast idler roller with double bearing provided for smooth running of the lm.Drying Chamber :- All M.S. rollers in the heating chamber synchronized and drive with main drive, One side Window to inspect the lm and thick glass wool to prevent the heat outgoing. 1HP AC KIRLOSKER MAKE blower in two zones will be provided. The hot air from heatingbox is uniformly blown at different position ensuring the equal air ow on the lm.Lamination Unit :- Winding unit consist of one steel roller, rubber roller for pressure, idler roller, center winding with one saft with cones,slipping clutch, all driven by 2 HP DC motor.Basement :- Heavy-duty basement will be provided to avoid the vibration.Control Board :- Control board having digital temperature controller, AC variable motor control for unwind and rewind, web guide starters,blower starters, Unwind and Rewind pneumatic tention controller, Pressure roller / Lay-on rollers pneumatic controls and all other standerdaccessories.

To meet the global environmental friendly requirments for composite material, the technology of composite materials abroad has been already using hot melt adhesive film/web as laminating or bonding adhesive for composite materials, which is instead of the toxic solvent-based adhesive gradually.
This coating & lamination equipment is specialized in using the hot melt glue as bonding adhesive, it has the advantages of eco-friendly, high efficiency, fast production speed, easy to operate and suitable for all kinds of mm
Applicable materials: tpu/pa/pes/eva hot melt adhesive granules


Wooden box

SG-3000 vacuum EVA glass laminating / laminated machine is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, metal mesh, fibre or other films into normal glass sheets in order to produce decorative and functional laminated glass.

SG-3000 is designed by means having solved many problems and difficult basis on decade experience, such as: Polluted glass by excessive adhesive, asymmetrical heating, low production but high energy consume etc. It is equipped with multilayer vacuum beds, and each bed is able to load double units so that the production capacity is double times than normal oven. This is a unique design of SG-3000-4DD.

SG-3000-4DD applied with draft fan system, so that can generate an even temperature, multi rubber bags can be load at same time, PLC system and multi-area control as optional.

The machines with different number of floors (from one floor to five floors) and working stations (single or double) are all available for your choice according to your production requirements.

wooden case

Cold / Plain lamination: This is very commonly used Machine, where the gum tray is present to hold the bonding agent (gum) dissolved into a liquid (water or a solvent or a solution), is applied to one of the webs. The adhesive coated web is laminated to the other under strong pressure which improves the bond strength of the laminate. It is commonly used to produce a Duplex sheets / paper-aluminum foil laminate that are widely used in flexible packaging.

INPUT: SHEET FORM OUTPUT: ROLL FORM

Product name: Laminating machine

Detailed product parameter description:

Product Model:

Our company has its own coating production line, which can provide surface coating protection for cold-rolled, galvanized, stainless steel, copper and aluminum plates with high requirements on material surface quality, effectively reducing various surface damages and scratches during processing and transportation of materials. At the same time, we welcome processing with supplied materials.