Coastal Sand And Mud Pump

1. Sludge dredging pump are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. Such as dredging, suck gravel in the dredger, suck gravel in the course of rivers or lakes, delivering slurries in mining, explosive sludge in metal smelting.( type znh pumps are of high-head ones )
2. Sludge dredging pump are widely used to dredger and dam in the rivers, ports and wharf over our country, such as changjiang river, huanghe river, liao river, and zhujiang delta. And also widely used abraoad, such as middle east, europe.

Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.

Design Features:

The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.

Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation.

Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.

The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components)

Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.

A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps

Washing fluid for mud , rinsing , coal mine water
The sediment concentration is not more than 4%, impurity particles slime water of not greater than 2 mm
The pump is mainly with zlj series coal mine tunnel drilling rig, and filling and emptying system with other systems

Model 2nb/50-1.5

Revolving speed 940(r/min)
Weight 180kgs
Dimension 1054¡á353¡á645mm

The mud pump to the crank connecting rod structure , triplex single acting piston horizontal pump, piston for lip sealing, made of rubber or ptfe and nylon mat pressing and into
The pump adopts the automobile gearbox, variable five flow, equipped with seismic pressure gauge and necessary spare parts, disassembling tools

Rated flow 250 145 90 52260 167 106 60 35
Piston reciprocating frequency 200 116 72 42187 121 76 43 25
Suction pipe size ¦õ76¦õ89
Drain pipe size ¦õ51¦õ50
Electric motor Model Ybk2-160l-4Ybk2-225m-4
Power 1545

Rotate speed
1440
Quality7602177
Outline size1540¡á1220¡á9502910¡á1318¡á891

1. Advanced hydraulic model, cad 3d design, high efficiency and obvious energy-saving
2. Large dredging depth, high density of dredging mud, good npsh and strong suction lift ability
3. Strong through-put. The pump can presistently discharge gravel, high plastic soil lump, etc.
4. The pump can be directly matched with either motor or diesel engine
5. Wide application. It can be used in various kinds of soil quality. Generally, the pump is matched
With an impeller with 3 or 5 pieces of vane. At the same time, the impellers can be provided with
Various diameters and vane types to suit kinds of working condition.
6. Little hydraulic loss, high efficiency and low oil-consumption
7. Little volume, light weight
8. Steady operating, little vibration, low noise
9. Simple & reliable constrution, easily disassembly & assembly, convenient maintaince
10.Reliable sealing without leakage
11.Long operating life of parts.

Details:
Yn series dredge pumps are horizontal cantilevered single stage , single suction pump. Generally. Large dredging depth, high density of dredging mud, good npsh and strong suction lift ability. It is used in submarine. Can meet all the requirements from the dredge.
Specification:
Capacity/flow: 1800-25000m3/h
Head / lift: 20-78m
Speed: 180-550 rpm
Medium density:
Ph of medium: 5-12
Caliber: 300mm -1000mm



Container

3s series water injection pump

Maxfully offers single acting reciprocating triplex piston mud pump; high pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; skid mounted and truck mounted pumping units and pump parts.

Api certified.

The 3s series high-pressure reciprocating triplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required.

It is designed and built for compactness, efficiency and long service life. Its systematical design with inlet and discharge connections on both sides offers great flexibility of string lay-out and ease of installation.

According to individual requirement, the pump comes with different types of motors; standard motor, permissible motor, frequency modulation motor, or magnetic adjustable-speed motor. To meet with ever changing working parameters, we provide custom-made high-pressure pumps too.

The 3s series pump consists of gearing part, driving part, hydraulic part and motor, and is installed on a metal base plate. With built-in pressure relief valve, pulsation dampener, pressure control and overload protection device, the pump is safe to operate and easy to maintain.

Maxfully offers Single acting reciprocating triplex piston mud pump; High pressure plunger pump for well cementing, acid/ steam fracturing, oil and water transportation; Skid mounted and truck mounted pumping units and pump parts.

API certified.

The 5S series high-pressure reciprocating quintuplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required.

It is designed and built for compactness, efficiency and long service life. Its systematical design with inlet and discharge connections on both sides offers great flexibility of string lay-out and ease of installation.

According to individual requirement, the pump comes with different types of motors; standard motor, permissible motor, frequency modulation motor, or magnetic adjustable-speed motor. To meet with ever changing working parameters, we provide custom-made high-pressure pumps too.

The 5S series pump consists of gearing part, driving part, hydraulic part and motor, and is installed on a metal bass plate. With built-in pressure relief valve, pulsation dampener, pressure control and overload protection device, the pump is safe to operate and easy to maintain.