Kv8-M7760-00X Yv100X 76# Yamaha Nozzle

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

It is a hot kind product with high quality and low cost, Most of Products from our company are OEM;
It has a long service life, at least 3 years;Our company support replacing within 7 days,and 15 days sent back fault products without any reason.

-

It is a hot kind product with high quality and low cost, Most of Products from our company are OEM;
It has a long service life, at least 3 years;Our company support replacing within 7 days,and 15 days sent back fault products without any reason.

-

It is a hot kind product with high quality and low cost, Most of Products from our company are OEM;
It has a long service life, at least 3 years;Our company support replacing within 7 days,and 15 days sent back fault products without any reason.


-

Application
Hongcong gasoline welding-cutting machine features an energy-saving rating over 80%, namely, 3 liter gas consumed in the machine equals to that of 1 bottle£¨40liter£©of acetylene, while the operation is the same to the acetylene torch with a higher performance, the fire may reach 2800-3000¡æ (adjustable) via mixture of aero explosion-proof material, atomized quadratic nanometer gasoline molecule and oxygen molecule, and available to cut steel, cast iron, stainless steel, cast aluminum, wrought aluminum and copper material. Hongcong gas welding-cutting machine also characterizes an easy operation, high speed, smooth welding, tiny cutting seam, flat slot, no slag, no flashback with an extensive cutting thickness between 0.5-400mm to eliminate the danger in operation, high cost, low efficiency, heavy waste and severe pollution of the acetylene torch. Hongcong gasoline welding-cutting machine has been ever more extensively used in iron & steel, shipbuilding, railway, petroleum, metallurgy, mining, machinery and other manufacturing industries to rate a longevity up to 15 years, it also features easy operation, explosive-proof installation, fine cutting, speed welding and cutting, convenient and extensively-adopted.
Packing list
HCQZ30 type Handgrip gasoline cutting torch¡­¡­¡­¡­¡­1pcs
HCQZ30 type cutting nozzle 1#~3#..................................... 3pcs
3 cutting nozzles:
1#- can cut steel sheet 3~10mm thickness
2#- can cut steel sheet 10~20mm thickness
3#- can cut steel sheet 20~40mm thickness
HC20-1 type handgrip welding torch¡­¡­¡­¡­¡­¡­¡­¡­¡­1pcs
HC20 welding nozzle(1#~3#)¡­¡­¡­¡­.¡­¡­¡­¡­¡­¡­¡­..1set
11Liter gasoline tank explosion-proof¡­¡­¡­¡­¡­¡­¡­¡­..1pcs
10m oil-resistant and fire proof rubber hose (optional longer add $2.00 per meter)
A tool box with relational tools and spare parts
Instruction and certification and Warranty sheet

Optional configuration
1- HCQZ100 type Handgrip gasoline cutting torch 1pcs with 3 cutting nozzles (cut range 30~100mm)
2- HCQZ300 type Handgrip gasoline cutting torch 1pcs with 4 cutting nozzles (cut range 100~300mm)
3- HC-50 type semi-automatic cutting torch 1pcs without nozzle
(Which can be refitted to the acetylene semi-automatic cutting machine of Chinese standard instead the acetylene cutting torch.)
4- HC-80 type profile cutting torch 1pcs without nozzle
(Which can be refitted to the acetylene CNC cutting machine of Chinese standard instead the acetylene cutting torch.)
5- HC-60 type Handgrip gasoline heating torch 1pcs with 2 cutting nozzles (hard flame and soft flame)
6- Nozzle

Packing list:
A gasoline duplicating cutting torch·+
An explosion suppression gasoline tank(no duplicating machine, the userf+s original acetylene duplicating machine can still be used);
10 meters oil-resistant rubber hose·+longer hose optional·¼;
4 cutting nozzles:
QZ30-1#- can cut steel sheet 3~10mm thickness·+optional·¼
QZ30-2#- can cut steel sheet 10~20mm thickness·+optional·¼
QZ30-3#- can cut steel sheet 20~30mm thickness·+optional·¼
QZ100-1#- can cut steel sheet 20~40mm thickness·+optional·¼
QZ100-2#- can cut steel sheet 40~60mm thickness·+optional·¼
QZ100-3#- can cut steel sheet 60~100mm thickness·+optional·¼
QZ300-1#- can cut steel sheet 100~150mm thickness
QZ300-2#- can cut steel sheet 150~200mm thickness
QZ300-3#- can cut steel sheet 200~250mm thickness
QZ300-4#- can cut steel sheet 250~300mm thickness
A set tip drills;
A set o-ring·+spare parts·¼;
Instruction;
A set certification.
Mark: CNC flame cutting machine combustion system reform
Existing acetylene or propane CNC cutting machine can be to carry out technological transformation; combustion material feeding system will be changed to gasoline supply system, become gasoline CNC Cutting Machine.
Performance Overview
Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting:
=+ Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using.
=ª Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside.
=ª Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures.
=+ It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting.
=+ As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.).
=- The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness.
=- The combustion tube is not backfire.
=ª Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished.
=- Itf+s normal working temperature range is -40 f¦ to 50 f¦.
=+ A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate.





Weight: 10kg/package
Dimensions: length 610mm, width 380mm, high 350mm.

Packing list:
A gasoline semi automatic cutting torch·
An 10liters explosion suppression gasoline tank(No semi automatic car and track, the userf+s original acetylene semi-automatic roadster can still be used);
10 meters oil-resistant rubber hose·+longer hose
4 cutting nozzles:
* can cut steel sheet 3~10mm thickness·
* can cut steel sheet 10~20mm thickness·
* can cut steel sheet 20~30mm thickness·
* can cut steel sheet 20~40mm thickness·
* can cut steel sheet 40~60mm thickness·
* can cut steel sheet 60~100mm thickness·
* 0-1#- can cut steel sheet 100~150mm thickness
* 0can cut steel sheet 150~200mm thickness
* 0can cut steel sheet 200~250mm thickness
* 0-4#- can cut steel sheet 250~300mm thickness
A set tip drills;
A set o-ring·+spare parts·
Instruction;
A set certification.
Performance Overview
Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting:
* Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using.
* Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside.
* Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures.
* It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting.
* As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.).
* The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness.
* The combustion tube is not backfire.
* Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished.
* Itf+s normal working temperature range is -40 f¦ to 50 f¦.
* A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate.
Metal welding & cutting revolution
Dear customer:
If you are using the expensive acetylene gas to cut or weld the metal, here I recommend my company's energy-saving products to you.
Patent (Patent No.: 992098149)
Through the National Machinery

Oxy-gasoline handgrip cutting machine

Packing list:
A gasoline handgrip cutting torch ff qz30optional+
A gasoline handgrip cutting torch ff qz100optional+
A gasoline handgrip cutting torch ff qz300+
An explosion suppression gasoline tank;
10 meters oil-resistant rubber hoselonger hose optional;
4 cutting nozzles:
Qz30-1- can cut steel sheet 3~10mm thicknessoptional
Qz30-2- can cut steel sheet 10~20mm thicknessoptional
Qz30-3- can cut steel sheet 20~30mm thicknessoptional
Qz100-1- can cut steel sheet 20~40mm thicknessoptional
Qz100-2- can cut steel sheet 40~60mm thicknessoptional
Qz100-3- can cut steel sheet 60~100mm thicknessoptional
Qz300-1- can cut steel sheet 100~150mm thickness
Qz300-2- can cut steel sheet 150~200mm thickness
Qz300-3- can cut steel sheet 200~250mm thickness
Qz300-4- can cut steel sheet 250~300mm thickness.
A set tip drills.




Weight: 10 kg/package
Dimensions:longth 610mm, width 380mm, high 350mm.

It is a hot kind product with high quality and low cost, Most of Products from our company are OEM;
It has a long service life, at least 3 years;Our company support replacing within 7 days,and 15 days sent back fault products without any reason.

-