H-Beam Assembling Machine

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

Product Details:
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month

Price And Quantity:
Minimum Order Quantity 1 Unit
Price Range 2500000.00 - 3000000.00 INR/Number

Product Specifications:
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.

Product Type Other
Power Source Electricity
Power 420 Volt (v)
Usage/Applications Casting, Forging, Sheet metal etc
Color Dark Blue
Technology Other
Operating Type Automatic
Surface Treatment Painted
Pressure 6-7 Bar

Product Description:
The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of I/H-Beam /Structural Steel Components etc.

It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 nos. of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel.

The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.

H-beam automatic welding machine
There lha gantry type, lhc cantilever type h.
It adopts a.C.Inverter control, with functions of stable running and fast traveling speed; the seam-tracking arc-guide mechanism is three-spindle system to guarantee the alignment without aberrancy; the main frame and welding machine are intergrated control, with flux auto-recovering system and it is easy to operate with high efficiency.
Lht double column-beam automatic welding machine can weld two pieces of beam at the same time, and the web height of beam is not limited by main machine.
Applied flange width200-800mm
Applied web height200-1500mm
Beam length4000-15000mm
Rail span4000mm
Rail length18000mm
Welding speed120-1200mm/min
Welding positionvessel position
Wire size3.25mm
Flux recycling system100kg*2
Main machine power9kw (excluding two saw welders

H-beam flange straightening machine
This machine is specially used for the h-beam flange distortion straightening, which includes hydraulic and mechanical straightening type.
H-beam flange straightening machine is specially used for the h-beam flange distortion straightening, which includes hydraulic and mechanical straightening type.
The structure of mechanical flange straightening machine is simple, with convenient and reliable operation.
The hydraulic type straightening has strong straightening force and high automation, which is developed firstly by us.
The straightening roller and powered roller is good alloy steel, which are made after heat-treating with long life using.
Modelhyj600hyj800yj60yj80
Flangewidth150-600200-800180-800180-1000
Flangethickness20mm40mm60mm80mm
Minwebheight160mm350mm350mm350mm
Materialq235aq235aq235a/16mnq235a/16mn
Straighteningspeed5.7m/min18m/min7.5m/min5m/min
Motorpower9kw25kw29.5kw37kw
Overallsize3600*720*18003500*1500*17004050*2900*21904050*2900*2190
Machineweight7000kg9000kg26000kg29000kg
H-beam automatic welding production line, flame cutting machine manufacturer.

H-beam automatic welding machine
There lha gantry type, lhc cantilever type automatic welding machine and lht double column-beam automatic welding machine.
It adopts a.C.Inverter control, with functions of stable running and fast traveling speed; the seam-tracking arc-guide mechanism is three-spindle system to guarantee the alignment without aberrancy; the main frame and welding machine are intergrated control, with flux auto-recovering system and it is easy to operate with high efficiency.
Lht double column-beam automatic welding machine can weld two pieces of beam at the same time, and the web height of beam is not limited by main machine.

H-beam cnc flame/straight cutting machine
On the basis of straight cutting machine increased the economical and practical cnc functions, can be used for bulk cutting straight plate and cutting straight.On the basis of flame cutting machine increased the economical and practical cnc functions, can be used for bulk cutting straight plate and cutting straight, girder integral bending, welding , annealing treatment to eliminate stress, stable structure, strong rigidity, long-term use is not easy to deformation, servo motor, reducer, pressure reducing valve, trachea, and electromagnetic valves, song gun and adopt international famous brand, to ensure stable and reliable .

Cutting width80-3200mm
Rail span3000mm-6000mm
Rail length14000mm
Effective stroke12000mm
Cutting speed20-6000mm/min
Straight vertical cut from the9 groups
Cnc cut from the2 groups
H-beam automatic welding production line, flame cutting machine manufacturer.