Hf Edge Glued Panel Press

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

OUR PRODUCT
DC 1200Reel TrackFully Automatic Auto Reel Changer SG50

Paper dust or fluff is an integral part of most of the paper used in web offset presses. Unfortunately, there is no reliabe and viable solution available for this kind of problem.

After years of research and taking feedback from customer, Prakash is elated to introduce DC1200 web cleaning and dust collecting machine. Its small footprint, easy to use and, no consumables design make it the only effective solution available in the market.

1, before commissioning must ensure that the pump and pipeline full of water, so as not to damage the pump.
2, the pump is filled with water to open the pump bleeder valve for exhaust, so as not to cause unstable pipeline pressure can not be normal pressure regulation.
3, the cabinet door on the surface of the manual stop automatic transfer switch, hit the manual for the frequency start, automatic inverter start by the outlet pipe remote pressure gauge according to the set pressure automatic control.
4, due to manual and automatic power supply into the line is not the same, so the manual and automatic pumps are not the same, all pumps to work manually are adjusted to the positive, automatic reversal of the frequency converter output on the U2, V2, W2, any two-phase switching can be.
5, set the pressure to stop the pump (i.e., the maximum pressure) just press (ENTER) on the inverter panel into the display (REF) and then press (ENTER) into the display of 40% (i.e., 0.4MPa pressure), such as the need to increase and decrease the pressure according to the (Increase key) or (Decrease key) to set the required pressure value (i.e., the pressure stop the pump), set the value of the pressure and then press (ENTER) to save, then the After setting the pressure value, press (ENTER) to save it, and then press (EXIT) to return to the main interface to complete the setting; the pump pressure is based on the highest pressure to be converted by itself without setting.

The pump cover and impeller are made of metal inserts wrapped with fluoroplastics (F46/F4/PTFE/PFA) and sintered and pressed as.

Fully Automatic Beeswax Foundation Machine / Roller / Press ISO Approved
Basic Information
Place of Origin:
china
Brand Name:
Super-Sweet
Certification:
ISO
Model Number:
SS-CCM-01
Minimum Order Quantity:
1 set beeswax foundation sheet machine/beeswax embossing machine/beesw
Price:
$200-$1000
Packaging Details:
1set/plywood case Apicultural equipments China supplies 450mm aluminum alloy electric manual beeswax foundation
Delivery Time:
7-10days
Payment Terms:
L/C,T/T,Western Union,MoneyGram
Supply Ability:
2000 Piece/Pieces per Month beeswax foundation sheet machine/beeswax embossing machine/beesw

Packing list:
A gasoline duplicating cutting torch·+
An explosion suppression gasoline tank(no duplicating machine, the userf+s original acetylene duplicating machine can still be used);
10 meters oil-resistant rubber hose·+longer hose optional·¼;
4 cutting nozzles:
QZ30-1#- can cut steel sheet 3~10mm thickness·+optional·¼
QZ30-2#- can cut steel sheet 10~20mm thickness·+optional·¼
QZ30-3#- can cut steel sheet 20~30mm thickness·+optional·¼
QZ100-1#- can cut steel sheet 20~40mm thickness·+optional·¼
QZ100-2#- can cut steel sheet 40~60mm thickness·+optional·¼
QZ100-3#- can cut steel sheet 60~100mm thickness·+optional·¼
QZ300-1#- can cut steel sheet 100~150mm thickness
QZ300-2#- can cut steel sheet 150~200mm thickness
QZ300-3#- can cut steel sheet 200~250mm thickness
QZ300-4#- can cut steel sheet 250~300mm thickness
A set tip drills;
A set o-ring·+spare parts·¼;
Instruction;
A set certification.
Mark: CNC flame cutting machine combustion system reform
Existing acetylene or propane CNC cutting machine can be to carry out technological transformation; combustion material feeding system will be changed to gasoline supply system, become gasoline CNC Cutting Machine.
Performance Overview
Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting:
=+ Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using.
=ª Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside.
=ª Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures.
=+ It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting.
=+ As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.).
=- The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness.
=- The combustion tube is not backfire.
=ª Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished.
=- Itf+s normal working temperature range is -40 f¦ to 50 f¦.
=+ A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate.





Weight: 10kg/package
Dimensions: length 610mm, width 380mm, high 350mm.

Packing list:
A gasoline semi automatic cutting torch·
An 10liters explosion suppression gasoline tank(No semi automatic car and track, the userf+s original acetylene semi-automatic roadster can still be used);
10 meters oil-resistant rubber hose·+longer hose
4 cutting nozzles:
* can cut steel sheet 3~10mm thickness·
* can cut steel sheet 10~20mm thickness·
* can cut steel sheet 20~30mm thickness·
* can cut steel sheet 20~40mm thickness·
* can cut steel sheet 40~60mm thickness·
* can cut steel sheet 60~100mm thickness·
* 0-1#- can cut steel sheet 100~150mm thickness
* 0can cut steel sheet 150~200mm thickness
* 0can cut steel sheet 200~250mm thickness
* 0-4#- can cut steel sheet 250~300mm thickness
A set tip drills;
A set o-ring·+spare parts·
Instruction;
A set certification.
Performance Overview
Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting:
* Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using.
* Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside.
* Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures.
* It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting.
* As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.).
* The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness.
* The combustion tube is not backfire.
* Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished.
* Itf+s normal working temperature range is -40 f¦ to 50 f¦.
* A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate.
Metal welding & cutting revolution
Dear customer:
If you are using the expensive acetylene gas to cut or weld the metal, here I recommend my company's energy-saving products to you.
Patent (Patent No.: 992098149)
Through the National Machinery