Cement

TYPES
1
Cement 42.5 N
CEM II/A-L
Bulk
2
Cement 42.5 R
CEM II/A-L
Bulk
3
Cement 42.5 N
CEM II/A-L
Big Bag 1.5MT
4
Cement 42.5 R
CEM II/A-L
Big Bag 1.5MT
5
Cement 42.5 N
CEM II/A-L NA 442
Bag 50Kg BUNDLED 2,2 MT per pallet
6
Cement 42.5 N
CEM II/A-L NA 442
Bag 25kg BUNDLED 2,15 MT per pallet
7
Cement 42.5 N-LH/SR5
CEM I
Bulk
8
Cement 42.5 N-LH/SR5
CEM I
Bag
9
Cement 52.5
CEM I
Bulk
10
Cement 52.5
CEM I
Bag

Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;

Please contact for full specs on quantities, delivery terms, etc...

NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

We supply the Required Grade and Type of Cement that have been procured from the Top Brands made available to the customers at the required Specification for the best prices in the Bulk quantities required.
It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.

Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market.

Features Of Cement

India is World’s Second largest Cement Producer. India is contributing tremendously to the Supply of Cement across the Globe. The Capacity of Indian market to produce and supply cement is increasing at swift pace.

We source the best quality and from the best brands. We supply OPC, PPC, Slag cement, White Cement and Sulfate Resisting Cement.

Bulk or bagged
Product from Turkey or worldwide

CIF US or ASWP Origem Egypt

The cement is the most demanding and essential raw material used in various production and construction activities. The cement industry has witnessed a steady growth in the market as different range of products using cement are manufactured. It is a binder, a raw material substance that serves as an adhesive to other materials. Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market. * Portland Cement is the most common type of cement used for concrete, and stucco. Types Of Cement We offer include: Ordinary Portland Cement Portland Pozzalana Cement White Cement Portland.
Origin :- Vietnam . Turkey

Payment Terms :- LC/SBLC

Cement

325 425 525 Portland cement



Specification

Sulfate Resistant Portland Cement SRPC also named Sulfate Resistant Cement SRC is one of hydraulic binding materials can resistance to sulfate ion attack

Type High Sulfate Resistant Cement PHSR and Moderate Sulfate Resistant Cement PMSR

Grade 325 425



Application

To make concrete of sulfate resistance marine concrete maritime works

To make cement boards precast cement products cement pipes precast concrete pile shop fabricated members

Sea water attack resistance projects for example sea wall dam mariculture project sea water desalination project oceanarium etc

Chemical resistant engineering concrete

To make sulfate resistant concrete engineering of harbor water conservancy underground tunnel drainage pipe diversion works road and bridge foundation etc

DIRECTIONS FOR USE:
- Shake well before using.
- Keep container closed when not in use.
- Set time is the time required before joint can safely be handled.
- Cure time is the time required before joint can be pressure tested.

1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go A1/A3 to A1/A2 way into fitting. If pipe bottoms into fitting it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation. Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least A1/A2 the size of the pipe diameter.
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting. Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts. Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 16 C or 60 F Longer cure time may be required for larger pipe and /or temperature is below 16 C or 60 F.

CURE TIME GUIDE:
Consult ASTM schedule

DIRECTIONS FOR USE:
Shake well before using.
Keep container closed when not in use.
Set time is the time required before joint can safely be handled.
Cure time is the time required before joint can be pressure tested.

1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go way into fitting. If pipe bottoms into fitting
it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and
fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation.
Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least the size of the pipe diameter
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting.
Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts.
Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low
and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 16 C or
60 F Longer cure time may be required for larger pipe and /or temperature is below 16 C or 6

Raw Materials from U.S.A