Soil Moisture & Temperature Sensor

About MT-10
We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
2.1 Specifications
Volumetric Water Content
Range: 0 (air) to 100 (water)
Temperature
Range: -40 to 80
Resolution: 0.01
Accuracy:±0.5
General
Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)
Prong Length: 5.2 cm
Dielectric Measurement Frequency: 70 MHz
Measurement Time: 150 ms (milliseconds)
Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms measurement
Output: SDI-12 / RS485 MODBUS RTU
Operating Temperature: -40 to 80
Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires (Pigtail)
Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer cable lengths.
PHYSICAL CHARACTERISTICS
SENSOR IMAGE
SENSOR NAMEMT10
DIMENSIONS10 cm X 3.2 cm
CABLE LENGTH5 meters

* Custom cable lengths are available for an

additional cost.

This ms10 soil moisture & temperature sensor is provided with high accurate and high sensitive. By measuring the dielectric constant of the reaction of soil, soil direct stable real moisture content.This ms10 soil moisture & temperature sensor can measure the volume of soil moisture.The soil moisture measurement method is in line with international standards at present.Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, soil, plant cultivation, measured speed of sewage treatment, grain storage, greenhouse control, precision agriculture, at the same time in the measurement of water, weather and particulate matter content.

, high measuring accuracy, fast response, good interchangeability
, good sealing performance, corrosion resistance, long buried in soil using
, the flame retardant epoxy resin curing, completely waterproof, can withstand the strong external shocks
, needle using quality materials, can withstand long-term electrolysis, can withstand the corrosion of acid and alkali in the soil
, high measuring precision, reliable performance, the effects of soil salt content is small, suitable for all kinds of soil
, having power reverse protection

Technical parameter

The signal output typeoutput voltage 0-2v
Output impedance

This MEC10 soil moisture & EC & temperature sensor is provided with high accurate and high sensitive. It is an important tool to observe and study the occurrence, evolution, improvement and the dynamics water of saline soil. By measuring the dielectric constant of the reaction of soil, soil direct stable real moisture content. This MEC10 sensor can measure the volume of soil moisture. The soil moisture measurement method is in line with international standards at present. Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, soil, plant cultivation, measured speed of sewage treatment, grain storage, greenhouse control, precision agriculture. The sensor has the following characteristics:
Soil moisture content, electrical conductivity and temperature three parameters.
One solution can also be used for fertilizer, and other nutrient solution conductivity matrix.
ï3ïElectrode using special treatment of the alloy material, can withstand a strong external impact, not easy to damage.
ï4ïCompletely sealed, acid and alkali corrosion, can be buried in the soil or directly into the water for long-term dynamic testing.
ï5ïHigh precision, fast response, good compatibility, the probe insert design to ensure accurate measurement, reliable performance.
ï6ïPerfect protection circuit and a variety of signal output interface.

Technical parameteVoltage output 0-2V
ïoutput impedance 0 ohmïCurrent output 4-20mA
(load resistance

Soil Tension sensor is a solid state electrical resistance sensing device that is used to measure soil water tension. As the tension changes with water content the resistance changes as well. That resistance can be measured using the soil Sensor. The sensor consists of a pair of highly corrosion resistant electrodes that are embedded within a granular matrix. A current is applied to the Sensor to obtain a resistance value. This sensor is designed to be a permanent sensor, placed in the soil to be monitored and â??read as often as necessary with a portable or stationary device. Internally installed gypsum provides some buffering for the effect of salinity levels normally found in irrigated agricultural crops and landscapes.

This Soil Moisture sensor is a FDR (frequency domain reflectometry) based sensor that is used to measure Soil volumetric water content (VWC) and temperature. The sensor consists of highly corrosion resistant electrodes. This sensor is designed to be used for portable as well permanent installations placed in the soil.

G7-H2 Wireless Temperature Sensor System
With G7 temperature wireless sensor and Base Station, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Base Station over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
Applications
water pipes network real time monitoring - water in and out temperature
oil/gas pipes network, pump stations
underground water level real time monitoring
environmental monitoring system - wind/temperature//CO2/pressure
remote Industrial equipment monitoring
rural equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry

G7-T2 Wireless Temperature Sensor System
With G7 temperature wireless sensor and Base Station, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Base Station over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
In the Package
1 x Base Station & RF Antenna
1 x AC/DC Adaptor
1 x Ethernet Cable
Up to 64 x Wireless Sensors in one single system
Applications
water pipes network real time monitoring - water in and out temperature
oil/gas pipes network, pump stations
underground water level real time monitoring
environmental monitoring system - wind/temperature//CO2/pressure
remote Industrial equipment monitoring
rural equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry

PE coil pipes and tubes for water and wire cable conduit PL231


The PE coil pipes and tubes can be used:

water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm


We use new 100% pure raw PE material


WHY NEW MATERIAL HDPE PIPES?

1. Health performance

PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.

2. Corrosion resistance

It can resist various chemical media erosion, with no electrochemical corrosion.

3. Service life

Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.

4. Impact resistance

PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.

5. Connection performance

The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.

6. Construction performance

It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.