Api 7-1 Standard And Sprial Drill Collar

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

Weigao offers a wide variety of drill collar sizes from 3 ¨û¡± - 9 ¨ö¡±, spiraled or slick, and with api connections. All our drill collars are tailored to your specific requirements.

We supply slick, spiral, and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches.

Weigao drill collar are high quality products which meet the hardest operating conditions. Each collar undergoes strict quality control, more than one hundred checks are made in the course of manufacturing. All mechanical properties meet or exceed the requirements of api spec.7-1 for drill collars.
Weigao drill collars are made of aisi 4145 h modified alloy steel or non-magnetic material. Other grades are available on request. Weigao drill collars are used successfully for sour gas wells. After forging or rolling, the bars are peeled, heat treated, stress relieved, ultrasonically inspected and straightened to api specifications, to ensure that each bar will meet the physical properties.


Bundles , all connections shall be equipped with pressed steel or plastic steel thread protectors.

4145h api 7-1 drill collars are made of modified aisi 4145h chromium molybdenum alloy steel. These drill collar bars are full-length heat treated and water quenched to obtain astm a-370 mechanical properties. Full mechanical and chemical mill test certifications are supplied with all drill collars. These mill test certifications guarantee a hardness range of 285 to 341 bhn and an impact value of 40 ft.-lbs. At room temperature one inch below the surface.

To ensure close tolerance bores, all drill collar bars are trepanned then drifted to api specifications. Bar surface finish is “as rolled” which is original mill finish.

Connections:
All connections are precision-machined to api specifications. Api relief groove pin and bore back box stress relief are available on request. Thread roots are cold-worked to offer a greater resistance to fatigue. All connections are phosphated to minimize galling during makeup and applied with thread storage compound. Thread protectors are installed to ensure adequate joint protection during shipment.

These types of Different Drilling Air Tool We are Exporting in the Global Market,

Ultralfine grinding mill machine pulverizer ,Widely used for ultrafine grinding of dry materials in various industries such as traditional Chinese medicine, western medicine, pesticides, biology, cosmetics, food, feed, chemical industry, ceramics, etc. Especially for fibrous and high toughness materials such as cordyceps, tea, and lingzhi, the crushing effect is more perfect.
Crushing particle size 1-75um ,capacity 70-10000kg/hour.
Welcome cooperate!

Lowest price API 7-1 non magnetic spiral drill collar

Product Description
Drill Collar is the basic component in the BHA which provide weight on the bit for dirlling and keeps the drill string in tension.Drill collar is manufactured from AISI 4145H modified quenched and tempered steel and is heat treatment along its entire length for uniform toughness and durability. Srict netallurgical test are performed pre specifications to ensure that the heat treatment produces consisitent and maxium hardness through the depth of the bar.
Feartures and benefits:
1. hardness rannge of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature
2.Connections ar phosphate coated afther machinning to protect the threads from corrosive elements and to prevent galling upon initial make -up
Thread roots are cold rolled on API and H0-90 connections
3.Pressed steel thread protectors are supplied fo all drill collar that are equipped with standard connections

We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.


Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.

Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.

Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.

Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.

Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.

Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.

Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.

Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.

We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.

-

* Description:

The roller reamer (drilling reamer) is used for all kinds of reaming stabilization in drilling operation, especially the function of stabilization in drilling of the abrasive formation. It is a hot-sale tool for hole size from 4 5/8 to 26. Additionally, it can be used in different hole when same body is equipped with different bearing block and rollers.
* Feature:
a. The body is made of high quality alloy steel, fully heat treated to 285-341brinell hardness and 54J minimum impact strength.
b. Rollers can be changed easily at the well.