Water Thinnable Paint

Anti corrosive paint
Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates
Colour:
Selected colours
Viscosity:
80 +/- 10 in ford cup b-4
Solids:
45 +/- 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Surface dry 4-6 hr.
Hard dry:
32 -48 hr.
Full curing in:
7-8 days
Flash point :
Above 30 c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/dip/ spray
Thinner:
P-71
Cross cut adhesion:
Passes
Bend test 1/2":
Passes
Resistance to salt spray test:
Passes 150 hr. Test
Surface preparation mild steel surface:
Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results
For marine application & chemical atmosphere
Polycoat -rop 801 epoxy primer can be used.

In 20 lts packing

Heat resiting paint
Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c
Gives brilliant lustre with excellent weather resisting properties.
Colour:
Aluminum
Solids:
48± 2
Coverage:
9-10 sq mts. / ltr/coat
Drying time:
Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour.
Flash point:
Above 30° c
Recommended dry film thickness:
15 to 20 microns
Method of application:
Brush/spray
Thinner
P-73
Storage life:
6 month
Surface preparation:
Mild steel surface
Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest.
Precaution:
Not to be used in areas of high acidity or alkalinity
Does not cure and remains soft until temperature reaches 200°c
At the time of application metal must be at room temperature
Avoid applying thick coat since that may cause blistering.
Uses:
In industry for painting chimney stocks, exhaust sustems

In 20 ltrs.

Water Proofing Paints

Water Repellent Paint-water Proofing Paint

No. Type Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats.
1 FEATURES Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.
2 RECOMMENDED APPLICATION Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.

EXPORT QUALITY PRODUCT Ritver Kitchen Emulsion is a water-based paint, it appears in matt finish and are excellent paints for the ceiling and kitchen and bathrooms. Excellent coverage dependent on the quality of substrate (9 to 11 sqmtrs per liters) at 30 micron thickness Paint System: Apply Primer Apply Wall Putty Apply Diamond Emulsion (choose from our color list)

Water Paints

10L Bucket Packing

Luxes Water Proofing Paint is a high quality water based paint. The product is an acrylic emulsion paint with high sheen and excellent resistance to algae and fungus.