Spring Turn Over Grandstand Seat

We supply the Required Grade and Type of Cement that have been procured from the Top Brands made available to the customers at the required Specification for the best prices in the Bulk quantities required.
It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.

Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market.

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years.

APPLICATIONS

Soil stabilization
Mortar
Used in combination with Portland cement
Pre-cast concrete
Ready mix concrete
Specialist projects

Seat with shared handrails, split flap seat. The foot is made of aluminum alloy die-casting, the surface of the phosphating treatment after the spray (or paint) treatment, never rust, with M10 Ã? 80 expansion bolts and stadium stands fixed. Seat color according to user selection.

Product features; gas-assisted injection molding, split seats, spring dump, hanging installation
Main material; polypropylene (PP), high-strength aluminum alloy, hot-rolled plate, hot-rolled profiles
Size parameters; width X deepth X height 450X420X800
Using venue; all kinds of indoor field, museum
Installation requirements; step height 280mm - 650mm, step width â?¥ 800mm, center distance
470mm-510mm
Additional features; handrails, cushions, cup holder, antistatic

Seat with shared handrails, split flap seat. The foot is made of aluminum alloy die-casting, the surface of the phosphating treatment after the spray (or paint) treatment, never rust, with M10 80 expansion bolts and stadium stands fixed. Seat color according to user selection.


Installation: side hanging type, flat ground floor type
Size: seat height 800mm, seat cushion depth 420mm, cushion width 450mm
Cushion chair surface 450 420mm seat back pad width 440mm back pad height 446mm back cushion 440 446mm
Center distance: 470 ~ 500mm
Style: split seat (flap chair), chair spring return (near the back), chair legs can even arm
Appearance: nice, comfortable seat, reasonable structure, strong strength
Ingredients: Polypropylene M02
Chair: high-quality aluminum die-casting forming, installation; vertical, hanging, (with spring flip).
Fixed: M10 80 expansion bolts fixed

Mitsubishi MG400 Motor Grader Specifications
Main Specifications
Blade Width: 3710mm (standard blade width)
Steering System: ATC
Weight & Loads
Operating Weight: 13,100kg
Front Axle Load: 3,700kg
Rear Axle Load: 9,400kg
Dimensions
Overall Length: 8490mm
Overall Width: 2400mm
Overall Height: 3360mm
Wheelbase: 5910mm
Tandem Wheelbase: 1520mm
Ground Clearance: 355mm
Engine
Manufacturer: MTB
Model: 6D22C
Rated Output: 110.3kW (150 PS) @ 2000rpm
Cylinders: 6
Bore x Stroke: 130 x 140mm
Displacement: 11.2liters
Hydraulic System
Output Pressure: 17.2MPa
Oil Flow Rate: 128L/min
Transmission
Type: DPS
Speeds: 6 forward / 6 reverse
Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse)
Tires
Front: 13.00-24, 14-ply
Rear: 13.00-24, 14-ply
Performance & Other Features
Operation Type: Hydraulic (HYD)
Scarifying Width: 1225mm
Minimum Turning Radius: 6900mm
Articulate Angle: 25
Fuel Tank Capacity: 230L
Optional Equipment: BL(4000), S/C

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.