Chamfer router bit v groove router cutter
Description of chamfer router cutter
Type: chamfer angle tools
Material: solid carbide
Quality grade: n, a
Packing: one piece in one plastic box
Stick ice lollipop ice filling sealing machine
The automatic stick ice filling -sealing machine for lollipop ice is small in size and light in weight, and is made of stainless steel. This machine can produce various beverages such as lollipop ice, milk sticks, fruit milk, fruit cold drinks, and so on. from small capacity to big capacity .
Product parameters of one :
Voltage: 220/50 (V/Hz)
Power: 0.75KW
Sealing speed: 2000 cups/hour
Filling capacity 0-150ml
Specification: 960 * 430 * 330mm
(Welcome give thumbs-up, comment,transmit)
welcome order !
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Size: Standard
Raw Material Used: Aluminum & Wood.
Hand Operated.
Gives Fine Cuts.
Light in weight.
For Cutting Soap Slabs very easily.
Cutting Operation Performed by Wire.
Adjustable Wire to cut Soap slabs in suitable sizes.
Size: Standard
Raw Material Used: Mild Steel.
Hand Operated.
Gives Fine Cuts, Easy to adjust sizes.
Cuts Soap Slabs, half bar, from soap slabs.
Cutting Operation Performed by Wire.
Easy to adjust sizes.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable
industries
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
For Cutting Soap Slabs into Bars and Cakes.
Gives Fine Cuts
Simple in Operation and Use.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Double Cutting Machine is used for cutting Soap Slabs into Bars & Bars into Cakes respectively and also used for cutting finished
Bars in to Cakes of any length that may be required.
Machine is very easy in operation and simple to understand.
The whole Block is cut into Slabs by means of Hand Cutter No. F-3 (TEMPLATE) then put the Slabs on the machine table i.e. for
2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size. The mechanism for pushing
the Soap forward is arranged by means of Rack & Pinion. The cut is clean and sharp. Gear arrangement is provided for smooth
operation.
Meant for Mass Production up to 5000 Kg.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.
Slatwall router bits slatwall cutter
Description
homepage: www.Eaglecnctec.Com
Type: t slot cutting tools
Material: solid carbide
Packing: one piece in one plastic box
Application
T-slot cutting, slat wall making z
This model two flutes straight cnc router bit like TCT bit but is the extra longer CEL (Cutter Edge Length) one. Blade length from 30mm to 85mm, total length from 82mm to 155mm. 2 inch long or 3 inch long straight router bis is normal size. It is widely use for 3D status rough carving and empty solid wood projects such as wood mould, "burial urnes" etc.
Extra Long Router Bit Features:
Industrial Quality
Tungsten Carbide Cutters
Solid Tungsten Steel Body
Anti-Kickback Design
Build-Up Resistant Coating
1/2" Shank
Satisfaction Guaranteed
