N,n-Diethylhydroxylamine (Deha)

Water Treatment
DEHA is used in Water Treatment Chemical Formulations for controlling corrosion in boiler very effectively due to its property of oxygen scavenge scores over conventional hydrazine hydrate since it is far less toxic and meets the standard for disposal of blow offs without any difficulty giving good protection against corrosion at the same time.
Polymerization
DEHA's powerful free radical scavenging ability coupled with its moderate volatility and relatively low order of acute toxicity makes it an ideal "po Polymer "/ vapour phase inhibitor for olefins or styrene monomer storage & recovery system. Because of its capability of inhibiting polymerlzatlot the gas phase, DEHA is finding use as an in-process inhibitor for the production of styrene, divinylbenzene, butadiene, isoprene and other monorr containing a reactive double bond.
â?¢ Photographic Chemicals
DEHA has reducing property, so it is used as an auxiliary chemical photographic developer for instant colour photos. Also, DEHA is effective in stabilization of image and in the prevention of discolouration.
Decolourisation
Phenol and Phenolic antioxidants can be decolourised with DEHA.

Inhibitors
DEHA also can be used as a colour stabiliser of monoalkyl phenol. Silicon Rubber
DEHA can be used as a raw material for the hardener of the Silicon Sealant and coating agent.

Storage
Can be stored and handled in equipment made of stainless steel of Type SS304 or SS316 or steel lined with glass, polypropylene or polyethylene
Storage in mild steel equipment or containers is not recommended.
DEHA drums should be stored in a cool and well ventillated area, away from sources of ignition. Forms two layers for concerntration from 33 to 87 wt %.
Packing
25 kg, 180 kg net wt. in HMHDPE carbouys & drums .
Health &Safety
DEHA is irritating to skin,eyes and the mucous membrane.
In case of contact,affected area to be washed with plenty of water for atleast 15 minutes.
In case of inhaltion,victim should be moved to fresh air and oxygen should be administered.
In case of ingestion,victim should be made to consume copious quantity of milk and water. Medical advice should be sought at once. Personal protective equipment should always be used while handling.

Melting point -46 �°C
Boiling point 209-210 �°C(lit.)
density 0.806 g/mL at 25 �°C(lit.)
vapor pressure 12.4Pa at 20�ºC
refractive index n20/D 1.4359(lit.)
Fp 165 �°F
storage temp. Sealed in dry,Room Temperature
solubility miscible
form Liquid
pka 10.07�±0.28(Predicted)
color Clear colorless to yellow
Water Solubility miscible
LogP 1.99 at 23�ºC

Melting point -46 C
Boiling point 209-210 C(lit.)
density 0.806 g/mL at 25 C(lit.)
vapor pressure 12.4Pa at 20 C
refractive index n20/D 1.4359(lit.)
Fp 165 F
storage temp. Sealed in dry,Room Temperature
solubility miscible
form Liquid
pka 10.07 0.28(Predicted)
color Clear colorless to yellow
Water Solubility miscible
LogP 1.99 at 23 C

CAS 68-12-2

HS code 2924191000

Packaging:190KG/ drum 80drum/20'gp,15.2mt/20â?²GP

1.Usage: N, N-dimethylformamide (DMF) is widely used as drug solvent. N, N-dimethylformamide is a dipole prophilic solvent with physical and chemical properties, so it is suitable for capillary electrophoresis (CE) solvent.

CAS : 127-19-5

HS code 2924199090

Package: 190KG*80drum,15.2tons/FCL

950KG*20IBC drum,19tons/FCL

20-22tons/ISO TANK

N,N- dimethyl acetamide is a clear colorless liquid, flammable. Can be mixed with water, alcohol, ether, ester, benzene, and aromatic compounds and other organic solvents. The boiling point of 166 �ºC. Freezing point -20 �ºC. Relative density 0.9366. Refractive index 1.4380. Flash point 70�ºC (open cup).

Dimethylacetamide, the full name is N,N-dimethylacetamide (chemical formula: CH3C(O)N(CH3)2 abbreviated as DMAC or DMA. A commonly used aprotic polar solvent. Colorless Transparent liquid, flammable. Can be freely mixed with organic solvents such as water, alcohol, ether, ester, benzene, and aromatic compounds. Used in the preparation of drugs, synthetic resins, and also used as a solvent for polyacrylonitrile spinning and carbon Extractive distillation solvent for the separation of styrene in eight fractions, etc.

N-(n-butyl)-thiophosphoricTriamide(NBPT)
Urease inhibitors can inhibit the activity ofsoil urease, which can inhibit and slownitrogen release. The use of soil ureaseinhibitors can effectively slow down theprocess of urea decomposition intoammonia, reduce the concentration ofNH4+ and NH3 in the soil, reduce waste,and at the same time Extend the diffusiontime of nitrogen fertilizer at thefertilization point, so that the fertilizersupply of the soil and the fertilizerdemand of the crop are synchronizedThereby increasing the effective utilizationrate of nitrogen fertilizer by 30%-40%.


Item Specification
Appearance White cystalline solids or white powder
Content 97%min
Melting point 57-60 C
Flashing point 96 C
Boiling point 277.4 C(760 mm Hg)
Density 4.3 g/L at 25 C
Loss on drying 1.0% max

N,N-Dimethylaniline DMA CAS 121-69-7 is an organic chemical compound, a substituted derivative of aniline. It consists of tertiary amine, featuring dimethylamino group attached to a phenyl group. It is an important precursor to dyes such ascrystal violet.



N,N-Dimethylaniline is yellow to brown colored oily liquid with a fishlike odor. Less dense than water and insoluble in water. Flash point 150�°F. Toxic by ingestion, inhalation, and skin absorption. Used to make dyes and as a solvent.



Specification


Appearance Colorless to pale yellow oil liquid
Assay â?¥99%
Aniline assay â?¤0.3%
N-methyl aniline â?¤ 0.5%
Water and others â?¤ 0.2%

Application
1) As dyes intermediate used for the manufacture of vanillin, azo dyes, triphenylmethane dyes etc. As an important intermediate for dyestuff, mainly used in the production of triphenyl methane dyestuff, also as solvent, antiseptic for metal, solidity for epoxy resin and polyester, and catalytic promoter for polyreaction of ethylene chemical compound.

2) In medical industry, it is used in the production of cephalosporin V, sulfanilamide -6-methoxamine pyrimidine, fluorine pyrimidine.

3) In perfume industry, it is used in the production of vanilla, as well as the vulcanized agent for rubber or the raw material for dynamite and some organic intermediates.

Metal cutting fluid bactericide MBM is a slow-release bactericide with broad spectrum and high efficiency and a certain gas-phase sterilization ability. It is suitable for inhibiting the growth and reproduction of microorganisms in various humid environments, preventing the generation of putrefaction and foul odors, and ensuring safe operation of the system.

Sexual fungicide, the product has good solubility, suitable for oil and water based systems.

In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.

MBM is a new generation of broad spectrum and low toxicity developed for water-based metalworking fluids

Sexual fungicide, the product has good solubility, suitable for oil and water based systems.

In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.

MBM is effective against both gram-negative and Gram-positive bacteria. MBM is effective against both gram-negative and Gram-positive bacteria.