In many leading industries Demister Pads have gained acceptance as a low cost and highly efficient means of separating Entrained liquid droplets from gas and vapour stream and we supply demister pad & mist eliminator for scrubber with high quality, the feathers as blow:
By careful choice of wire diameter, knitted mesh demisters with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.
Along with wire diameter and mesh density, another important parameter in design and operation is the vapor velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals.
Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require.
Type Specification:
Standard type 40-100 60-150 105-300 140-400 160-400 200-570
High-efficiency type 60-100 80-100 80-150 90-150 150-300 200-400 300-600
High-penetration type 20-100 30-150 70-400 100-600 170-560
Damping type 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120
or according to your demands
Construction materials:
SUS304, 304L, SUS316, 316L, Copper, Nickel, Titanium, MONEL, P.P (Poly propylene), P.E (poly ethylene), teflon and glass fiber
Packaging Details:
Plastic bag inside, carton or wooden case outside.
Delivery:
10-15 days after received your payments.
Benefits:
1 Easy to install in all process equipment
2 Most cost-effective solution when equipment sizes are set by other requirements
3 High efficiency with low pressure drop
4 Emergency delivery available
5 ISO9001:2008
In many leading industries Demister Pads have gained acceptance as a low cost and highly efficient means of separating Entrained liquid droplets from gas and vapour stream and we supply demister pad & mist eliminator for scrubber with high quality, the feathers as blow:
By careful choice of wire diameter, knitted mesh demisters with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop.
Along with wire diameter and mesh density, another important parameter in design and operation is the vapor velocity. This can be controlled by careful selection of the mesh area. Optimal area will depend on operating temperature, pressure and pressure drop. Under normal operating conditions, 99% + removal efficiency can be achieved with a pressure drop of less than 250 Pascals.
Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require.
Type Specification:
Standard type 40-100 60-150 105-300 140-400 160-400 200-570
High-efficiency type 60-100 80-100 80-150 90-150 150-300 200-400 300-600
High-penetration type 20-100 30-150 70-400 100-600 170-560
Damping type 33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120
or according to your demands
Construction materials:
SUS304, 304L, SUS316, 316L, Copper, Nickel, Titanium, MONEL, P.P (Poly propylene), P.E (poly ethylene), teflon and glass fiber
Packaging Details:
Plastic bag inside, carton or wooden case outside.
Delivery:
10-15 days after received your payments.
Benefits:
1 Easy to install in all process equipment
2 Most cost-effective solution when equipment sizes are set by other requirements
3 High efficiency with low pressure drop
4 Emergency delivery available
5 ISO9001:2008
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35SH,N45SH,N30UH,N38EH
Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N38,45H,N40SH,N42SH,N33UH,N33EH
Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N54 Neodymium Arc Magnets for PM motor
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : 45M,38H,N40SH,N33UH,N35EH
Tolerance in size : +/-0.1 mm
