Silicone Rubber Collapsible Bag

We are supplier and exporter of Ferro Silicon.

Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.

Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.

Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each.

Ferro silicon, ferro silicon powder, ferro silicon briquette.

Subject: Offer of High-Quality Ferro silicon (Fe Si 72-75%)
Origin: Turkey
MACH TECH Fze is established in Ham riyah Free Zone, Phase I, Sharjah, one of the busiest ports for supply and distribution of various products, globally. We are equipped with one of the largest capacities at a single location and have the ability to supply in bulk. We are one of the biggest trading companies in the private segment. It has more than 1,000 employees , this company is dealing with a number of different industries such as Petrochemical, Oil and Gas, Minerals, pharmaceuticals and food industries in national and international market.it would be great if you visit our website:www.machtechco.com
We are pleased to offer you Ferro silicon 72-75% (Fe Si) with consistent quality and competitive pricing. The product is originated from Turkey, a reliable source well-recognized in the metallurgical supply chain. Product Specification (Typical Analysis):
Silicon (Si): 72% - 75%
Aluminum (Al): <1.5%
Carbon (C): <0.2%
Sulphur (S): <0.02%
Phosphorus (P): <0.03%
Size: 10-60 mm (or as per your requirement)
Packing: 1MT Jumbo Bags or customized
Key Advantages:
Stable quality with guaranteed specifications
On-time delivery from Turkey or Emirate port
Flexible logistics and payment terms
Available stock for prompt shipment
We would be pleased to share a detailed quotation, samples, or further documentation upon your request. We look forward to the opportunity to collaborate with your esteemed company.

Protection in the kitchen and on the dining room table.
Easy-clean silicone pot holder.
Heat resistance + 260°c/500°f
Cross shaped design, very popular
Foldable for saving storage space
Nylon core coated with food grade silicone
Anti-slip and decorate your kitchen
Dishwasher safe.


This expandable potholder / trivet is made of food grade silicone, unique designed trivet for resting pans and hot dishes. Silicone eliminates marking of surfaces and withstands heat to 500f.Great for variety of uses including as kitchen potholders, trivets. As its expanded size can be up to 22cm/ 8 2/3 inches, suitbale for most hot pan, pots and dishes. Cool pot holders is easy to clean and to store. After use, it folds neatly away for convenient storage. Table trivet, made from a high-quality silicone-nylon composite. Your logo can be printed on the central pod, we can make one solid color or any two tone color, can be any pms color.

High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products.


Description
GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding.

Features
Excellent process ability
Excellent mechanical and electrical properties
High tensile strength
FDA & FLGB grade

Applications
Kitchenware, bakeware
Skin cover for mobile devices
Tubes, sealing

Product Data
Item Standard (GB/T) 2031P 2041P 2051P 2061P 2071P 2075P 2081P
Appearance Transparent
Linear shrinkage
(%) 130mm 130mm 3.6 3.6 3.5 3.5 3.4 3.3 3.3
Hardness
(Shore A) 531.1-2008 31 42 51 62 71 75 81
Tensile strength (MPa) 528-2009 8.2 10.2 10.4 10.1 10.0 9.7 9.0
Elongation
(%) 528-2009 759 652 570 462 369 310 205
Tensile set
(%) 528-2009 6.0 3.6 4.0 5.6 5.2 3.6 2.8
Tear strength
(KN/m) 529-2008 24 28 32 32 31 28 26
Curing agent: C-15, 2%; Curing condition: 170 ºC 10mins, Post cure: 200 ºC 4 hours

Storage:
Store in a cool and dry place, out of direct sunlight
Package: 20Kg/carton or 600Kg/box

Introduction of rtv 2 molding silicone rubber:
1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst.
2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours.
Features of rtv 2 molding silicone rubber:
1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability.
2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage.
3. Rtv 2 molding siliconerubber has high duplication times.

Operation step for rtv 2 molding silicone rubber:
1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly.
2. Step two to use rtv 2molding silicone rubber: vacuum pumping
3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation.


25kgs/drum vacuum package or 200kgs/drum

1. Manufactured from silicone rubber.
2. Offering good mechanical,insulation and sealing protection.
3. Accommodating a wide range of cable sizes.
4. For indoor or outdoor applications.
5. Simple and fast installation.
6. Color: Grey, black,ect.

addition cure rtv2 liquid silicone for making mold

1. Description
YJS-620 is a two-component 1:1 Mix addition (platinum)cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin and easy to pour. 
 
2. Features
*high chemical resistance to the aggressive components of some types of resin
*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
*High level of accuracy in reproducing very small particulars
*High dimensional stability over time and non-deformability
*Considerable resistance to high temperatures and to ageing
*Excellent non-stick effect
*Soft, stretchy, high tear resistance,
*Will not shrink in service

3. Technical datasheet
Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) YJS-620
Hardness Shore A 20±2
Mix Ratio A:B 1:1/10:1
Color / translucent
Pot life 25 °C (77F) 30-40mins
Curing time 25 °C (77F) 3-4 hours
Mixed viscosity mPa.s 5000±1000
Tear-strength kg/cm 20±2
Tensile-strength M.pa 4.0±1.0
Elongation % 500±50
Shrinkage % â?¤0.1%
 
3. Common uses
*Wax
*Urethane (polyurethane)
*Plaster Hydrocal, Hydrostone
*Polyester casting resin
*Low melt metals (mold life can be short)
*Cement, Concrete
*Epoxy
*Soap
*Chocolate

4.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months.

5.Package
1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

Product Feature of Electronic Potting Silicone Rubber
HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)PP ABS PVC, etc. and metal materials.

2. Typical Application of Electronic Potting Silicone Rubber
HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.


3. Technical Guidelines of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80?100?, the silicone will cure in 15 minutes; while in 25? room temperature, the silicone will cure around 8 hours.