Optical Transmitter-1550Nm Internal

Detail: pro-class:Optical Transmitter
Pro-id:SYD8600-II
Reliable optical output
Laser thermoelectricity refrigerator
Temperature-controlled circuit
Mirco CPU control laser working state
The micro-processor software provide the
Function of digital indicating
Error warning
Network control
Remote control.

Features:
1) High quality, high linearity DFB laser
2) Advanced pre-distortion function
3) 1U, 19 inch standard chassis, 220VAC, 50Hz switching power supply or others.
4) 750 or 862 MHz bandwidth, supporting most broadband transport applications.
5) Unique thermal design provides superior heat dissipation, increasing the reliability of your system.
6) Automatic gain control helps maintain constant RF drive level to laser for consistent performance.
7) An interface LCD display allows you to monitor the transmitters performance. In addition, RS232 helps you monitor your transmitter performance in a long-distance


Specifications
Item
Unit
Specification

Bandwidth
MHz
47-750 or 860

Optical Wavelength
nm
1310 (í+ 20)

Optical Output Power (í+ 0.25 dB)

(4~20mW) all series

Safety Power Shutdown

Yes

Input RF Power, Main (í+ 0.1 dB)
dBµV
72.0(+3/-2)

Isolation, Auxiliary to Main Input
dBc
-32

AGC Input Range
dB
í+ 3

Response Flatness (maximum)
dB
í+ 0.75

Response Slope
dB
0 to 0.75

Input Impedance
ª+
75

Input Return Loss
dB
>14

RF Test Point (í+ 1.0 dB)
dB
-20

Carrier-to-Noise Ratio (CNR)
dB
>51.0

Composite Second Order (CSO)
dBc
í_60

Composite Triple Beat (CTB)
dBc
í_65

Powering
V
AC220í+10%

Power Consumption (maximum)
W
40

Mechanical Specifications



Optical Connector

FC/APC, or SC/APC

RF Connector

F-Type

Dimensions (height í- width í- depth)
cm
4.3í-48.5í-30.0

Environmental Specifications



Ambient Temperature

-25+65

Operating Temperature Range

0-50



Notes:

Optical link budget that provides a C/N of 51 dB when loaded with 59 PAL-D channels over a 10km single fiber.

Composite Triple Beat (CTB) is 65dBc typical (all models)

Composite Second Order (CSO) is -60dBc typical (all models)

Specifications are subject to change without notice.


6KG

1310nm optical transmitter, with front panel digital display showing input level, which adopts high linearity dfb laser of famous brand in the world, and builds-in perfect pre-distortion adjustment circuit and laser apc, atc closed loop control circuit. All the operating parameters are controlled by microprocessor, and the lcd screen on the front panel can display relative operating status and the fault information. Cmot-1310 series is designed and produced by absorbing the advantages of all kinds of 1310nm transmitter from both home and abroad. Featured with high index, multi-function and high reliability, it is suitable for high-end subscribers application

1> adopt word-famous company (ortel, aoi selected by user) advanced dfb laser instrument; max output optical power reach 31mw in ortel laser. Our specialized 2 dfb design max. Output level comes to 31+31mw. Coaxial laser max. 10+10+10+10mw (4*10mw)

2>best looking and convenient design of the front panel digital display.

3> advanced fiber in/ rf in, fiber out function, transit longer distance.

4> add advanced rf pre-distortion circuit, to use as proofreading catv system most important ctb and cso index, and to improve c/n index.

5>use our own gaas( imported mmic) hybrid, assure good output level.

6>built-in perfect power output automatic control circuit and laser thermoelectricity refrigeratory temperature automatic control circuit, insures highest output index and longest life.

7>built-in microprocessor automatic control circuit makes dfb laser always in best work state.

8>front panel blue vfd display, shows various main work status parameters and realizes automatic fault alarm and network management monitor.

Working temperature: -40¡æ~+75¡æ
Trasmission range: 20/40/60/80/100km(sm) 2km(mm)
Application: military, oil and gas, mines, security, broadcasting, tactical field lan.

Summarize

The NE100 Optical transmission platform can be as a converge center of optical transmission system in headend and hub to increase network reliability, scalability and cost-effective deployments. NE100 provide high usable module density (up to 14 modules in 4RU chassis), smart management in local or through SNMP, simplified installation, optional redundant powering, hot-swappable modules.

Features

Convenient: Blind-mate RF adaptors on the back-plane. Simple insertionand removal of modules; vacuum fluorescent display and navigation buttons for use as a simple interface for local status monitoring and control

High Density: Capable of accommodating up to 14 application modules in a 4RU chassis

Universal: Application modules can be located in any slot.

Hot-swappable Modules: All application modules are hot-swappable modules, time-delay and protection circuit inside

Intelligence: CPU intelligent system controller, monitoring the output voltage of power module and the system temperature; Blue-Screen VFD display the work status of the system; Element Management interface and independent TCP/IP server, ease to manage remotely

High Reliability: two additional slots in the rear accommodate the AC and/or DC power supplies (120/240 Vac or -48 Vdc). One is main power supply, another is redundant, heat switched automatically


Configurations

Chassis

Model
Descriptions

NE100-H
Housing (only),no power

NE100-H1
Housing, 1 NE100-PSAC

NE100-H2
Housing, 2 NE100-PSAC

NE100-H3
Housing, 1 NE100-PSDC

NE100-H4
Housing, 2 NE100-PSDC

Powering Modules


Model
Descriptions

NE100-PSAC
AC Power Supply 180~264V,50/60Hz

NE100-PSDC
DC Power Supply,-48v

Application Modules

Module
Descriptions

TFT100-(output power,mw)
Forward 1310nm Optical Transmitter 4~20mw

TFR100
Forward optical receiver

TRR100
Single Reverse Optical Receiver

TRR120
Dual Reverse Optical Receiver

TRT100F
Reverse Optical Transmitter,FP

TRT100D
Reverse Optical Transmitter,DFB

TRT100C
Reverse Optical Transmitter,CWDM



NE100-H Chassis

Technical Specifications

Items
Specifications

Dimensions(Hí-Wí-D) mm
177í-437í-550

Slots
14

Power supply
AC,180~264v 50/60 Hz, or DC,-48V

RF Connectors
F-Type

Weight kg
20

Ordering Information:

Model Number
Descriptions

NE100-H
Chassis (only),no power

NE100-PSAC
AC Power Supply 180~264V,50/60Hz

NE100-PSDC
DC Power Supply,-48v

NE100-H1
Chassis, 1 NE100-PSAC

NE100-H2
Chassis, 2 NE100-PSAC

NE100-H3
Chassis, 1 NE100-PSDC

NE100-H4
Chassis, 2 NE100-PSDC



PS100 AC & DC Power Supplies


Summarize

The PSAC and PSDC are power supply modules that provide AC and DC voltages for the NE100 optical broadband transmission platform, the module is installed in the rear of the Housing accommodates two power supplies for true power source redundancy. When two power supplies are used, the load is shared between both supplies. If one supply fails, the other immediately picks up the additional load.


Features

1. High reliability.

2. Low output voltage

3. Dual power supply hot-switched

Specifications

Input Voltage
180-270V 50HZ AC


40-72VDC

DC Output
+24.4V7A


+5.4V 8A


-5.4V 8A

Efficiency
>85%


Note: PSDC-48V, -48V DC Power Supply.


10KG

1. Excellent photodiod
2. 1310nm and 1550nm two mode receiver

3. 862MHZ bandwidth,Bi-directional transmission

4. High reliability

5. GaAs amplifier module,4 high level output ports, low distortion

6. Excellent switching power supply

7. Return path optical transmitter: FP , DFB , CWDM available




Specifications:

Forward path

Item
Unit
Specification
Remark

Optical
Optical Wavelength
nm
1310 or1550


Optical Input Power
dBm
+1.5 -5


Optical Connector

FC/APC or SC/APC


Optical Link
Frequency Response
dB
í+1.5


Output level
dBµV
>104
Optical input power -1 dBm

Return Loss at Output
dB
í¦16dBí_550MHz

í¦14dB550-860MHz


C/N
dB
í¦51
1) Connected with TOT13 optical transmitter,10KM opticalfiber plus the loss of optical passive,4%OMI.

2) RF output levelí¦104dBuV,optical input power -1dBm.

CSO
dB
í¦60

CTB
dB
í¦65





Reverse Path

Parameter
Unit
Specification
Remark

DFB
FP

RF Input
dBmV
18
18


Optical Output Power
mw
1~4
1


Input Return Loss
dB
<-14
<-14


Flatness
dB
í+1
í+1
5~200MHz

C/N
dB
50
45
1) Four signal method: 19,25,31,37MHz

2.)Two signal method: 13,19MHz

3)Test Condition: standard receiver, 10dB link loss.

CSO
dBc
-51
-45

CTB
dBc
-55
-45

Optical Output Power
mW
1~4
1


Flatness
dB
í+1
í+1
5~200 MHz

Optical Wavelenth
nm
1310
1310


Operation Temperature

-20~+85
-20~+85