Cement Block Machine

pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.

Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.

CHENGCHUANG are China machining parts workshop for Radio Control R/C Planes, RC Airplanes, RC Helis and Helicopters, RC Cars, RC Trucks, RC Truggys, RC Boats, RC Radios, RC Engines, parts, hop-ups, and accessories, We can produce machined parts according to your requirements. high quality, low price, low cost OEM CNC Machining service.

machining parts: Hydraulic, valve, flange, automobile, shaft, bearing housing Bar, plate,welded part, marine part, winch part, sheet metal
Equipment: Common lathe,CNC Machine,Milling,Turning,Stamping Machine,Spring Machine

Metal Process: CNC turning, milling, drilling, planning, grinding, welding. Surface Treat: Zn (Cr3 RoHS free or Cr6 ) plated, Cr /Ni plated, hot-dip galvanizing, paint,anodize, powder coating, brush, Polish Technical: Dedicated mechanical designer, experienced worker 3D design service inclusive of modeling, analysis and detailed drawing at normal cost

Quality: ISO 9001: 2008
Control strictly and follow specification
Move fast to meet your urgent need caused by accident.
Packing: Wooden case, hardboard, steel pallet, according to customs requirements
If you want to know more about RC CAR PARTS in China, Please contact us. www.chinacncmachining.net

Table, wire cutting frames size depends on the rectangle or square soap block size

Raw Material Used: Cast Iron, Mild Steel and Stainless Steel if required

Hand Operated

Cuts soap blocks into slabs, slabs in to bars and bars in to cakes in three operation

Gives fine accurate cuts

Simple in operation and effortless cutting

Meant for mass production

Cutting operation performed by wire

Bearing & Double Gearing System for effortless feeding the soap toward the wire cutting frames

Extra wire cutting frames to buy for cutting various dimensions and grams of soaps

The whole Block is cut into Slabs in 1sttable wire frame, then spinning the pusher wheel for the Slabs on the machine table for 2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size.

The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion

The cut is clean and sharp

For smooth operation the gear arrangement is provided

Double Cutting Machine No. E-2 (Mild Steel Contact Parts)

Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Double Cutting Machine is used for cutting Soap Slabs into Bars & Bars into Cakes respectively and also used for cutting finished
Bars in to Cakes of any length that may be required.
Machine is very easy in operation and simple to understand.
The whole Block is cut into Slabs by means of Hand Cutter No. F-3 (TEMPLATE) then put the Slabs on the machine table i.e. for
2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size. The mechanism for pushing
the Soap forward is arranged by means of Rack & Pinion. The cut is clean and sharp. Gear arrangement is provided for smooth
operation.
Meant for Mass Production up to 5000 Kg.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.

1)brief introduction
Qm4-45 diesel engine mobile cement block making machine, this is the new type machine of our factory.With advanced design of the machine.Could extend the life span of the machine.Also could produce so many kinds of blocks, such as hollow.Solid.Porous and so on, just need to change the moulds
2)technical parameters of the machine
Size3150*1800*2400mm
Power sourcediesel engine
Power10hp
Mould cycle 45s
Vibration modelmould vibration
Weight1300kgs
Productshollow/solid/porous 
3)production capacity of the machine
Spechollow block
(400*200*200mm)hollow block
(400*150*200mm)hollow block
(400*100*200mm)porous block
(240*115*90mm)solid brick
(240*115*53mm)
Pcs/pallet456921
Pcs/hour3204004807201680
Pcs/8hour256032003840576013440
4)specific details of the machine


5)brief introduction of our factory
Linyi fuda brick machine factory is a professional brick machine manufacturer.Was located in zhuanbu economic zone, yinan county, linyi city, shandong province, china.Established in 1996.And established the sub company which named linyi yingcheng international trade co., ltd in 2015.We had exported so many sets machine to other countries, such as kongo, tanzinia, kenya, parkistan, bangladesh, south arrica, malysia and so on.
1.With iso9001 certification of our products.
2.About 21 years experience
6)recommend machine and video link 

Wire stitching machine
Method wire stitching machine model ebm2000 automatically staples the manually fed printed exercise book cover and ruled paper sheets, folds it and rolls it to form finished exercise books.


Machine size : 4.3 x 0.9 x 1.7 meters, in export packing.

Block machine

Parameter:
Framework dimension: 680*4, 150*2, 900 mm
Pallet/plate size (mm): 1, 100*700*25 (bamboo) 1, 100*700*20 (pvc)
Weight: 11, 100 kg
Vibration frequency: 50-90 hz
Max excited force: 90 kn
Molding cycle: 15-20 days
Installed capacity: 32.8 kw
Product discriptions:
1. Unique designed storing system: double hopper design makes it possible that aggregates can be supplied efficiently and uniformly to avoid pockety.
2. Multi-vibration system: it can send the vibration force to every parts of the mould box synchronously to improve the durability of blocks/bricks. It adopts systematic design of machine, electricity, liquid and computer to meet the big table work.Requirement. The vibration force & frequency are adjustable according to different materials and craftwork procedures: low frequency-adding materials and high frequency-molding.
3. Control system: digital location sensor is used to make sure the accuracy of every operation. Plc photoelectric real-time control system can protect the equipment to work normally. It is high technology researched by ourselves including touch operation and patent oil pump protection. It is more durable. It is easy for the users to operate with the help of real-time prompt facility.
4. Autodiagnostics: real-time malfunction self-diagnosis facility can give an alarm of fault resolution timely. It is combined with the remote control system by telephone lines to make self-diagnosis.



Framework dimension: 680*4, 150*2, 900 mm
Weight: 11, 100 kg