Resin Cable Jointing Kits For Hazardous Areas

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by
resin casting. With its many rectangular and square spaces, it provides two-dimensional
homogeneous mechanical characteristics.
The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh
sizes and thickness
- Advantages
- Easy to assemble
- High Load-bearing capacity
- Easy to install and maintain / repair
- Durable in harshest environments
- Suitable for ventilation and natural lighting

Cable joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc.

And in the cable joint breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function scotchcast resin cable joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damage.

18455kgs of Fiberglass
E GLASS DIRECT ROVING

Ref: E6DR17-2400-386T for 9 289kgs
+ Ref: E6DR24-4800-386H for 9 166kgs

TAKE ALL - 20 pallets (25m3) - 18 000 $
EXW FRANCE (59)

Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting.
directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.

Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement.
It has the following advantages in relation to metal:

9 times lighter
3 times stronger
corrosion resistant
significantly accelerates the reinforcement process (knitting on the object is not necessary)
no need to put chairs
low thermal conductivity
Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different.

The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors.

With this exception, almost the entire range of concrete structures remains:

Fiberglass rebar area of application
Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of:

Foundation;
Marine and port facilities;
Reinforcement of concrete tanks;
Repair and strengthening of bearing capacity of brick and reinforced concrete structures;
Road slabs, airfield slabs;
For the production of small architectural forms;
For the road paving and decking of highway bridges;
The implementation of the infrastructure elements in the chemical industries;
Repair of damaged brick and reinforced concrete structures;
Fittings are used for constructions based on gypsum binders;
Construction of swimming pools and industrial pools;
The application of fiberglass fittings in civil and industrial construction is caused by many variables:

Low specific gravity;
High corrosion resistance;
Low thermal conductivity of composite materials;
High strength, several times the strength of steel fittings;
Is a dielectric;
Durability;

As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.

E-glass Also Known as Electrical Glass is the
Standard Glass Composition Used for Most Glass
Fibers. It is Made From the Oxides of Silicon,
Aluminum, Calcium, Magnesium, and Boron.woven Roving is a Bidirectional Fabric Made by
Interweaving Direct Roving. Woven Roving is
Compatible With Many Resins, Such as
Polyester, Vinyl Ester and Epocy Resins. Woven
Roving is a High-performance Reinforcement
And Widly Used in Processes Such as in Hand
Lay-up, Molding, and Pultrusion for the
Production of Boats, Automotives Parts,
Furniture, Sport Facilities and Other Frp
Products