Flow: 20m3/h
Head: 91m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
