1W Isolated Smd Dc/dc Converters Tpte

1W Isolated Single Output SMD DC/DC Converters
part No.: TPET1209
power:1W
package: SMD
Input voltage:12V,
Output voltage: 9V,

Miniature surface mounted DC/DC Converters are an ideal and economical solution for many applications where noise reduction, voltage isolation, voltage conversion in distributed power systems is required. The internal SMD construction with leadframe technology makes it possible to offer a product with high performance, these converters are qualified for the higher temperatures requested by lead-free reflow solder processes, especially for automated SMD production lines.

RoHS compliantLead frame technologySingle isolated output
3KVDC isolationEfficiency up to 78%
Power density 1.8W/cm3
Operating temperature: -40to 85UL 94V-0 Package materialFootprint over z pins 1.37cm2
Custom solutions available


ParameterConditionsMin.Typ.Max.Units
Voltage range12V input variants1112.013.3V


ISOLATION CHARACTERISTICS
ParameterConditionsMin.Typ.Max.Units
Isolation voltageTested for 1 second10003000VDC
ResistanceViso= 1000VDC1G

ABSOLUTE MAXIMUM RATINGS
Short-circuit protection1 second
Lead temperature 1.5mm from case for 10 seconds300
Internal power dissipation610mW


Input voltage Vin,


All specifications typical at TA=25, nominal input voltage and rated output current unless otherwise specified.

Add suffix P for continuous short circuit protection,for example TPTE0505P , Add suffix X has no 5,10,12 pin, for example TPTE0505X.

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.

Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design

Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel

Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.


Rated output power: 50KW
Rated energy: 75KWH

Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms

Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.

Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator

1w 6kvdc isolated dc/dc converters
Part numberNominal input voltageOutput voltage
VV
Tpj0505s5ï5
Tpj0509s5ï9
Tpj0512s5ï12
Tpj0515s5ï15
Tpj1205s12ï5
Tpj1209s12ï9
Tpj1212s12ï12
Tpj1215s12ï15
Tpj0303sa3.33.3
Tpj0503sa53.3
Tpj0505sa55
Tpj0509sa59

Tpj0512sa512
Tpj0515sa515
Tpj1205sa125
Tpj1209sa129
Tpj1212sa1212
Tpj1215sa1215

The tpa series are miniature, isolated 1w dc/dc converters in a sip and dip package. They offer the ideal solution in many space critical applications for board level power distribution. The internal smd construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency, lower output ripple noise and 3kvdc isolation.


Part numberNominal input voltageOutput voltage
V V
Tpa2405d24ï5
Tpa2405da245
Tpa2409d24ï9
Tpa2409da249
Tpa2412d24ï12
Tpa2412da2412
Tpa2415d24ï15
Tpa2415da2415
Tpa2405s24ï5 z
Tpa2409s24ï9
Tpa2412s24ï12
Tpa2415s24ï15
Tpa4805d48ï5
Tpa4805da485
Tpa4809d48ï9
Tpa4809da489
Tpa4812d48ï12
Tpa4812da4812
Tpa4815d48ï15
Tpa4815da4815
Tpa4805s48ï5
Tpa4809s48ï9
Tpa4812s48ï12
Tpa4815s48ï15

Apex Eco 6.2 kW Hybrid Smart Inverter

Technical Specifications
Feature Description
Maximum Power 6.2 kW (6200 Watt)
System Voltage 48V DC
MPPT Solar Charge Controller 120A (Wide Input Voltage Range)
Waveform Pure Sine Wave
AC Output Voltage 220-230V (�?�±%2)
Input Voltage (PV) 120V �¢?? 500V DC
Smart Modes Solar Priority / Battery Priority / Grid Priority
Sales to Grid Yes (On-Grid Hybrid Mode)
Display Large LCD screen + detailed menu
Protection Features Overload, short circuit, high temperature, low battery etc.

Apex is a brand of Electrozirve

Apex Smart Inverter

Main Technical Features
Technical Detail Value
Product Name Apex Eco 11 kW Smart �°nverter
Output Power 11,000 Watt (11 kW)
Working Voltage 48V DC
MPPT Solar Charge Current 120A
PV Input Voltage 120V â?? 500V
AC Output 220V â?? Pure Sine Wave
Battery Compatibility Gel, AGM, Lithium (LiFePO4)
No Grid Connection (Off-Grid Only)
Display LCD digital display
Cooling Automatic fan control
Protection Systems Overload, short circuit, over temperature, low voltage etc.
Waranty 2 years
Single Phase

Apex is an Electrozirve brand