Gl120Y Hydraulic Dth Drilling Rig

Description:

1. Gl120y high air pressure dth drill powers the moving of the oil hydraulic motor, rotation, propelling and lifting, swing angle location and so on by diesel ( or electromotor) driving the hydraulic oil pump.
2. The dth hammers consumes the pressure air only when drilling. It can save energy (fuel oil or electric quality) as 40%-50% as the total pneumatic drill. It can also work with drill rods and button bits for rock drilling.
3. Gl120y is good for blasting hole in surface mine, water electric building, road construction and stone project.


Main technical parameters

Hole diameter 90-140mm
Hole depth 30-90m
Hammer 4, 5, 6inch
Drill rod 60mm, 76mm, 89mm
Air pressure 1.05-2.4mpa
Air consumption 11.3--24mï/min
Max. Hole hight (horizontal) 3.1m
Angle of guide up 45ï, down 60ï
Max. Swing angle of frame right 35ï, left50ï
Boom swing left 45ï right 45ï
Angle of boom up 48ï, down 19ï
Lift up >30000n
Rotary speed 0-90r/min
Rotation torque 3000n.M
Traveling speed 0-2.5km/h
Braking wet-type double disk, release hydraulic oil, spring application
Grade ability 26ï
Transportation dimensions 6000*2300*2400mm
Weight 7.0t
Engine yuchai 70kw or cummins engine 56kw

Optional parts: wet-type dust collection, dry-type dust collection, cummins diesel engine

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

Hydraulic Drilling Rig Features


JK590C / JK590 are the new generation of diesel (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series.

In contrast with the last generation, they feature lower operation cost and humanized design.

They adopt a 70kW Yuchai diesel engine and hydraulic pump station assembly to generate power to rotate, feed, lift, walk and angle position.

During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 crawler drilling rig consume about 40% to 50% less energy (diesel or electricity), and the air displacement of matched air compressor decreases 30% to 50%.

Compared with JK590, JK590C is additionally equipped with hydraulic dust collection system, and wet type dust collector is optional if water is accessible on site.

JK590C/JK590 are mainly applicable to blast hole drilling process of hydropower construction, open pit mining, quarrying, road construction and national defense construction.





Hydraulic Drilling Rig Technical Parameters






Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Walking speed

2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg




The crawler drilling rigs are widely used in blasthole drilling of mining, hydropower, transportation and defense projects, as well as harbor and channel construction; The hydraulic drilling rigs are specialized in drilling the boreholes of large diameter and depth, for instance, water well drilling and geothermal well drilling.

high efficiency All In One DTH Drilling Rig
With less price and more equipment, JK810, the most cost-effective representation product of JK Drilling and Atlas Copco as the solution to the integration of drilling rig and air compressor, is set to revolutionize your imagination.
JK810 is an All-In-One hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. The FOPS-approved cabin and automatic pipe handling system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining. 

General Weight kg 14300
Length mm 9920 (transport)
Width mm 2400
Height mm 3300
Undercarriage Track width mm 350
Ground clearance mm â?¥400
Track oscillation ° ±10°
Walking speed km/h 2 (low) / 3 (high)
Grade ability ° 20°
Engine Model QSL8.9-C360-30
Type Water-cooled six-cylinder EFI diesel engine
Rated power kw/rpm 264/2100
Fuel tank capacity L 450-500
Air compressor Model Atlas Copco two-stage rotary screw air compressor
Working pressure bar 20
Max. FAD m3/min 18.5
Rotary motor Rotation rate rpm 0-85
Max.rotation torque Nm 3300
Feeding method Hydraulic motor + Chain
Feeding force kN 12
Lifting force kN 18
Feed Feeding stroke mm 3850
Feed extension mm 1100
Drill pipe changer Drilling diameter mm Φ90 - Φ150
Drilling depth m 21
Pipe diameter mm Φ76
Pipe length m 3
Pipe capacity piece 6+1
Hammer specs 4" - 5"
Dust collector Collecting method Hydraulic dust collecting

Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs
Low operation cost and humanized design.

Borehole Diameter
90-165mm

Site Condition
It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.
Product Features
JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. 
In contrast with the last generation, they feature lower operation cost and humanized design. 
They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. 
During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. 
Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site. 
JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.

Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Travle speed 2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg

JK520 Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Drilling Rigs, Crawler Mounted DTH Drill Rig
It features its compact design, small footprint, and humanized operation.
Borehole Diameter
90-150mm
Site Condition
It is applicable to the blasting borehole drilling process of hydro project, open pit mining and road construction.
Product Features
JK520 internal combustion (electric) crawler mounted hydraulic DTH drilling rig is the latest updated product of the "Sharp Sword" series, specially designed for the hydropower project and quarry mining project. 
JK520 can drill boreholes of various angles, ranging from horizontal angle to vertical angle. It boasts its better performance, compact design, small footprint and humanized operation.
JK520 is equipped with environment-friendly dry type dust collector, and as long as water is accessible on working site, wet type dust collector is optional.

Model  JK520
Borehole    diameter 90-150mm
Borehole    depth 40m
Applicable    rock hardness f=6-20
Working air    pressure 1.2-2.4MPa
Air    consumption 11-21m³/min
Feeding    stroke 3865mm
Rod-changing    length 3m
Max.    horizontal drilling height 2510mm
Feed    extension 1200mm
Ground    clearance 300mm
Rotation rate 0-79rpm
Rotation    torque 2500Nm
Travle speed 2Km/h, 3Km/h
Grade ability 25°
Power Yuchai    70KW
Dust collector (optional) Hydraulic dry dust    collector
Wet dust collector
Dimension    (LxWxH) 7000mmÃ?2250mmÃ?2250mm
Weight 5800kg
Wired remote    control Optional

DTH hammer is one of our main products.It strictly matches with API standard and other Chinese industry standards.It is durable for being produced with advanced craftwork and good material.It also has the following advantages:

First,Can be used in hard rock application.

Second,it Can work on low to high pressure radius.

Third,High rate of penetration while utilizing less air.

These types of Different Drilling Air Tool We are Exporting in the Global Market,

Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills
In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%.
Borehole Diameter
90-165mm
Site Condition
CM358A crawler mounted hydraulic DTH drilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions.
Product Features
CM358A crawler mounted hydraulic DTH drilling rig adopts diesel engine (or electric motor)  and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning. 
During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy. 

Model CM358A
Borehole    diameter 90-165mm
Borehole    depth 50m
Applicable    rock hardness f=6-20
Working air    pressure 1.2-2.4MPa
Air    consumption 11-21m³/min
Feeding    stroke 3820mm
Rod-changing    length 3m
Max.    horizontal drilling height 3370mm
Rotation rate 0-80rpm
Rotation    torque 3000Nm
Travel speed 2Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins    74KW
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust    collector
Wet dust collector
Dimension    (LxWxH) 6900mm Ã? 2200mm Ã?    2200mm
Weight 6100kg