Graphite Sic Surface Coat

PP8000SH
POLYESTER PUTTY - HEAVY
A combination of a special unsaturated polyester resin with a selected quick setting for subsequent coats for the complete Ritver paints system.
PP8004
POLYESTER PUTTY - LIGHT
A lightweight two-component Polyester based putty, formulated to exhibit very good adhesion and high elasticity.
This product is suitable for large surface areas; is easy to apply and provides excellent sandability.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

PVA primer is the prime foundation coat to seal the wall surface and it helps attaining adhesion to the subsequent coat

Protective coatings serve as a vital defense for metal structures, effectively reducing corrosion by limiting the exposure of surfaces to harsh and corrosive environments.

These coatings comprise a range of materials, including polymers, epoxies, and polyurethanes, for non-metallic protection, as well as zinc, aluminum, and chromium used in metallic protective layers.

1. Corrosion resistance
2. Abrasion resistance
3. Chemical protection
4. Thermal barrier
Thereby, enhancing the durability and lifespan of industrial and domestic applications.

Our Offerings
-- Bitumen Coating
-C/R Primer and Finish
--Epoxy Primers, Intermediates & Surface Tolerant Coatings
-Epoxy Finish, High Build coatings, Coal Tar Epoxy coatings
--Epoxy Solventless & Glass Flake coatings, Tank Linings
-HR Aluminium 250, 400 & 600 Deg
--Pipeline
-Coatings
--PU Primer, Finish & Radiation withstanding coatings
-Zinc Rich & Zinc Silicate Primers
--Various Grades Of Thinners

NT1299
NC TOPCOAT is a preparatory coating designed to enhance adhesion and promote durability for subsequent paint applications.
Formulated with nitrocellulose and specialized additives, this primer provides excellent sealing properties, filling minor surface imperfections while offering optimal adhesion to various substrates including metal and plastics.

1. Specialty coating products applicable on all surfaces
2. 0 VOC environmentally Friendly products
3. Extremely high corrosion resistance
4. Single component system - no mixing, no thinner required.
5. No shelf life or Pot life issues
6. Available in all RAL Shades
7. Suitable for application over -40 Deg Cel upto 200 Deg Cel temp range

Our Wood Coating is one of the best seller products. Based in Mumbai, Maharashtra we offer a huge variety of 15 natural stains that have been especially specially formulated with the superior quality solvent based fast drying stains that aid in accentuating the natural beauty of the wood grains. Wipe and fill the surface and further smooth sand the surface with a 180 grit paper. Next, apply stain with muslin cloths in addition to the grains. Further let the surface dry for about 30 minutes before the application of the finish coat. You can mix the stains with the NC/ melamine finishes approximately 20% by volume, if required. Never mix the stains woody or PU finishes. We are the leading exporter, supplier and manufacturer of Wood Coatings.

DUKE+ PU Ready Mix White Topcoat 4:2 1L
DUKE+ PU Ready Mix White Topcoat 4:3 4L
DUKE+ PU Ready Mix Black Topcoat 4:2 1L
DUKE+ PU Ready Mix Black Topcoat 4:3 4L
DUKE+ PU White Base Coat for Pearl Finish 1L

Long-Lasting Exterior Protection:
Built for tough road and weather conditions, offer exceptional resistance to UV radiation, rain, fuel, oils, and environmental pollutantsâ??ensuring your vehicleâ??s finish lasts for years.

Showroom-Grade Finish:
Delivers outstanding gloss, color retention, and surface uniformity. Ideal for both full-body repaints and spot repairs where appearance matters.

Benchmarked to Aerospace Standards:
Our automotive-grade formulations are developed using globally accepted standards, including performance protocols used in aerospace coatings, ensuring premium, proven reliability on the road.

Fast Application, Faster Turnaround:
Optimized for spray application with rapid drying times, enabling faster cycle times for workshops, body shops, and service centers.

High Film Build with Fewer Coats:
Achieve optimal Dry Film Thickness (DFT) with fewer passesâ??providing excellent scratch resistance, surface leveling, and long-term durability without excessive material use

Given the growing graphite is widely applied in industry, lack of material there to shake chu chen, the division began

To develop the graphite surface treatment to solve this problem, do vgi or sic for the graphite surface treatment

Technology has further breakthroughs can be applied to semiconductors, optoelectronics other industries.

Vgi is mainly used in surface treatment temperature below 600 degrees environment.

Sic is mainly used in surface treatment temperature below 1300 degrees environments.