1.PVC crossflow cooling tower fill description:
Marley MX75 is a crossflow film fill, which can provide you cold water in the present splash-fill cooling tower without sacrificing fan horsepower. No other eliminator could come close to MX75 eliminator’s low drift rate and low pressure drop.Now, virtually every eliminator is a nesting cellular PVC type design. Mx75 incorporates highly efficient cellular drift eliminators, which were integrally molded within the fill sheets. Compared with previous designs, these eliminators reduce drift emissions from the tower by a factor of ten or more! Less drift means your saving on your water bills and water treatment chemical expenses. And, you’ll virtually eliminate the nuisance caused by drift spotting on adjacent buildings and property. To save you even more, the drift eliminators discharge air directly toward the fan. Since the air is traveling in the right direction when it leaves the eliminators, you’ll save on fan horsepower.
3.PVC crossflow cooling tower fill technical data:
1. Light weight, high strength, good flame retardant performance, corrosion resistance, advance design, small ventilation resistance, strong hydrophilicity, large contact area, etc.
2. Size/Item: 915* any length, 1220*any length(3 feet*any length)( 4 feet*any length),1520mm*
3. Pitch: 19mm
4. Pitch thickness:0.28-0.38mm
5. Application temperature: 75°C~35°C
6. Application Cooling tower: Cross-flow cooling tower