SET-BR Series Servo Tensioner With Cylinder Inside
SET-BR Series Servo Tensioner is with Cylinder inside and the tension roller is fixed in front of tensioner body. It is able to changing-over two tension forces.
Servo tensioner is sent from the traditional passive-line change to take the initiative to send lines from the motor, by replacing the spring tension to change its value, this product comes with tension feedback stabilization system that can automatically tension stable equilibrium. Tension is not speed, wire cover, pulleys, and felt the impact of tension in particular stable and easy to adjust.
The linear speed of standard type is 5m/s, and it can be customized that according to your special requirements.
Okaya Europe GmbH is a distributor in Europe for Uratani Engineering Winding Coils.
Our strength lies in our ability to prototype and mass product coils suited to all manner of products.
URATANI ENGINEERING has amassed a track record of delivering around 400 coil prototypes annually.
We also respond to customer feedback, such as can you make this kind of coil and accept various requests for coil production from single pieces to mass production runs.
In addition, the design and production of machinery is also carried out in-house, once we understand what the customer needs, we can also Customize the production process.
Product feature:
--Magnetic damping tensioner is a magnetic field of media tension constant torque transfer device,
--The damping plate doesn't touch with magnet and without sliding friction, long use life time.
--The tension control is extreme stable.
-- It is simple and easy to fix on machinery, easy to adjust the output torque too, compact design.
-- Small size, always keep stable when it is running in a variety of locations.
Product feature:
1. Tension test condition: Winding speed 5m/s, the tension range is 200-10000g.
2. TCL series thensioners are simple to be adjusted. Tension can be adujsted and pre-set to the require value according to the application so as to achieve appropriate winding condition,and to ensure the conformity of each coils technical parameters.
3. TCL series is the key device controlling the changable tension during winding, make the copper suitable and controble tension. So the the wired coils are more flat and , makiing the technical standarded reached.
Note
1. When the working angle and the rest angle are the same, or when the tension rod fall down to 90 degree angle, please reset the tension to avoid the wear and tear and reducing the life time.
2. When replace the wire during normal working status of tensioner, please check whether there is wire scrap. Make sure to clean them off otherwise it leead to inregular change of tension when starting again the tensioner.
These magnetic tensioners use a device containing a permanent magnet as a noncontact method of generating a variable resistance to rotation of the main
wheel of the tensioner, thus maintainingwire tension at the set value for longer
periods than their mechanical counterparts with greatlyreduced requirement for
adjustment.
Polished ceramic eyelets and guide rollers at each point of contact protect the insulating
enamel from mechanical damage.
The performance of these magnetic wire tensioners is exceptional given the low cost,
providing outstanding value for money.
Captive roller on tension arm is easy to thread, eliminates chance of losing wire.
Keep the items in a secure way by using the composite straps. Therefore, check the uses of it.
The composite straps build together with the top quality material to pack the materials.
It provides securing coils to the steel or paper.
The materials such as bricks, glasses, and metal pieces are packed in a unit load.
It is effective using the composite straps packing the corrugated boxes and shipping containers.
Features
Light Weight
Safe and No Risk of Injury
No Corrosion and Easy Handling
Re-tensionable
Shock-absorbent,
High Retained Tension
High Impact Resistance
Characteristics Weather proof; heating insulation; fireproof; anti-rust; sound insulation; long life span: more than 20 years.
Corrosion Resistance: the aluzinc coating surface protects the base steel not only by providing barrier to corrosion elements, but
also by the sacrificial nature of the coating.
01. SMOOTHNESS
No composite indentation, no residual stress, no deformation after shearing.
02. DECORATIVE
You can choose a realistic material and aesthetic wood grain, stone coating. Patterns and colors can be customized according to
customer requirements.
03. DURABILITY
Surface paint, high gloss retention, good color stability, minimal change in chromatic aberration, and long service time.
04. STABILITY
The change of wind pressure, humidity and temperature will not cause bending, deformation and expansion. It has strong bending and flexural resistance.
Package
1 Inside is kraft paper
2 Middle is water plastic film
3 Ouside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve.
Monthly Output
10000 tons
Remarks
Insurance is all risks and accept the third party test
Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS)
Surface Treatment
1. Galvanized
2. PVC,Black and color painting
3. Transparent oil,anti-rust oil
4. According to clients requirement
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
01. SMOOTHNESS
No composite indentation, no residual stress, no deformation after shearing.
02. DECORATIVE
You can choose a realistic material and aesthetic wood grain, stone coating. Patterns and colors can be customized according to
customer requirements.
03. DURABILITY
Surface paint, high gloss retention, good color stability, minimal change in chromatic aberration, and long service time.
04. STABILITY
The change of wind pressure, humidity and temperature will not cause bending, deformation and expansion. It has strong bending and flexural resistance.
Package
1ã??Inside is kraft paper
2ã??Middle is water plastic film
3ã??Ouside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve.
Monthly Output
10000 tons
Remarks
Insurance is all risks and accept the third party test
Characteristicsï¼?Weather proof; heating insulation; fireproof; anti-rust; sound insulation; long life span: more than 20 years.
Corrosion Resistance: the aluzinc coating surface protects the base steel not only by providing barrier to corrosion elements, but
also by the sacrificial nature of the coating.
01. SMOOTHNESS
No composite indentation, no residual stress, no deformation after shearing.
02. DECORATIVE
You can choose a realistic material and aesthetic wood grain, stone coating. Patterns and colors can be customized according to
customer requirements.
03. DURABILITY
Surface paint, high gloss retention, good color stability, minimal change in chromatic aberration, and long service time.
04. STABILITY
The change of wind pressure, humidity and temperature will not cause bending, deformation and expansion. It has strong bending and flexural resistance.
Package
1ã??Inside is kraft paper
2ã??Middle is water plastic film
3ã??Ouside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve.
Monthly Output
10000 tons
Remarks
Insurance is all risks and accept the third party test
6061 T4 round aluminum bar is are magnesium and silicon which has moderate strength good corrosion resistance weldability and good oxidation effect In particular there is no stress corrosion cracking tendency its excellent weldability corrosion resistance and cold workability are good and it is a wide range of use A very promising alloy Can be anodized coloring can also be painted on enamel suitable for building decoration materials It contains a small amount of Cu so the strength is higher than 6063 but the quenching sensitivity is also higher than 6063 after extrusion can not achieve wind quenching need to resolution treatment and quenching aging in order to obtain higher strength 6061 aluminum alloy contains 0408 silicon 07 iron 01504 copper 015 manganese 0812 magnesium 004035 chromium 025 zinc 015 titanium and a residual amount of aluminum The tensile strength of 6061 aluminum alloy is 180Mpa yield strength is 110Mpa elongation is 14 widely used in the manufacture of trucks building ships trams furniture mechanical parts precision machining industrial materials and other fields
Future Goods 1020 days Ready stock 510days
Packaging
Seaworthy Wooden pallet Wooden caseAluminum case
Application
Transportation construction machinery and equipment decoration industrialization etc
Payment Terms
TT LC etc
Warehouse storage
In order to meet the needs of customers small batch multispecification to spot the minimum order quantity of a single specification is 1 ton we have been committed to 18 series aluminum sheet aluminum sheet aluminum coil aluminum foil aluminum tube and other aluminum products R D production and sales Annual inventory of more than 3000 tons complete brand specifications truly meet customers onestop procurement