Mtb Series Magnetic Damper

Magnetic damper coil winding components tension control magnet damper
Introduction of the magnetic damper
1. The magnetic damper and name tension controller, tension control or brake, is a constant torque transmission medium of the magnetic field of the device.
Damping disk with magnets, no sliding friction without contact, the service life is long, tension control extremely stable.
2. Installation simple structure, the output torque is a convenient adjustment.
3. Structure compact design, small size, can be in all sorts of steady work position.
Usage of Magnetic Damper
Recommends that customers will scale value transferred to use 4 or above, if this time tension too large, had better choose a smaller size specifications of damper. If in scale value below 4, may have used the pulse of the force. Please click HouXiang 3 stated way eliminate pulse. Loosen screw, will turn to 10, turn the scale axis at the same time slow will scale turn to 0, and then turn to Scale needed to tighten lock screw, value. If use appeared in the process of tension, please repeat the above phenomenon pulsation adjustment method 3 steps until the satisfied tension. Damper magnet produce media magnetic field, use material, the use of large brittle do not open it, lest attaint parts.
Specification of magnetic damper

Model Applied wire diamiter(mm) Tension scope(cn)
MTB-02 0.04_ 0.08 10g_ 50 g
MTB-03 0.09_ 0.15 40g_ 150 g
MTB-04 0.16_ 0.50 160g_ 1200 g
MTB-05 0.40_ 1.00 200g_ 2000g
MTB-06 1.00_ 3.00 800g_ 3600g
MTB-08 3.00_ 6.00 3600g_ 6500g

Advantage of our coil winding components magnetic damper
1. Precise tension of magnetic damper
2. Competitive price of magnetic damper
3. Excellent quality of tensioner
4. Various kinds of tensioners for choosen including mangetic tension, electronic tensioner,
Mechanical tensioner and servo tensioner.
5. Fast response speed
6. Professional tensioner engineering team
7. Good after-sales service

MW5 series electric lifting magnet | Series Electromagnetic Separators
Product Description

Lifting Electromagnet for Steel Scraps
Introduction:

Electromagnet is used for transporting iron scraps,ingots,steel chips,slabs,steel plates and steel sheets.Electromagnet is suitable for installing on excavator,crane;and electromagnet also can be submerged under water,can be used at very high temperature and normal temperature in metallurgical plants,scrap yards and ship-building plants.
Options:

Rated Voltage DC220V;Strong Excitation Type;Overexcitation type.
Consists of Lifting Magnet, Cable Reel,Control Cabinet, Cable Connector.
· Lifting Magnet:MW5-130L/1
· Rectification Control Cabinet:DKP-4
· Cable Reel:JTA100-15-2
· Quick Coupling:DKL-50
Features:

1ã??a unique magnetic circuit design, use of aluminum coil,coil plates used to protect the good wear resistance of high manganese boards, light forces,the lifting capacity.
2ã??the structure is simple,sfe,reliable,applicable to all types of lifting equipment.
3ã??with the exception of the use of voltage,but also a strong exciting waay.Can improve the lifting capacity and increase economic efficiency.
4ã??applicable to the removal of cast iron ingots,Steel Ball into all kind of scrap.
75% or 60% Duty Cycle
All welded heavy duty construction
Class H insulation
Powerful deep magnetic field design
Aluminum Coil , Copper optional
ShenGang produces the following types of magnets:

· (Circular/Square/Rectangular), available diameters from 500 mm up to 3000 mm;
· Heat insulated magnets.They are used to move hot cargoes having surface temperature of up to 700°C;
· Magnets for any climatic requirements;
· Magnets with up to 75% duty ratio;

MOQ : 100 Pack

Business Type Distributor
Country of Origin India
Size Standard
Type Magnetic

Product Details

Material Metal, Plastic
Color Available in Many Colors
Technics Machine Made
Pattern Plain
Finishing Polished
Brand Name Office Mate

Cs magnetic mud separators

Brief introduction:
The series cs magnetic mud separators are mainly used for fine mineral separation to separate the magnetic particles from the non-magnetic particles (mineral mud) by the gravity force, magnetic force as well as water flow force.
By computer design the product features with high efficiency, high reliability, rational structure and easy operation.

Standard packing

Keao SH series retarders is designed for special heavy bus, and truck.
Specification of Keao SH Series retarder:

1. Application:Torque ranges from 2800N.m to 3500N.m,adaptable for a variety of vehicles( weigh 22 ton~50 ton)
2. Applicable for long drive sgaft vegicles,to be installed between drive shaft.
3.Adapting middle axle structure,working indenpendently with almost no affect to the chassis
4. Imported axle and high temperature resistant lubricant extend its life span
5. Maintenance convenience without the necessity for adjustment of clearance



Different size and dimension is available.
Weight ranges 85-180kg

Permanent magnetic lifter has strong magnetic path composed of NDFEB permanent magnetic material with high performance ferromagnetic system. The handle's movement changes the magnetic force on and off .. There is a steel ring on top of the magnetic lifter for hoisting objects, and the series a lifting also have a v-shaped groove at the bottom for holding cylindrical objects. Because of the permanent magnetic lifters have many excellence. For example, lightly and ingeniously structured, easy for application, strong magnetic attraction power and safe in handling. So the permanent magnetic lifters are the most ideal lifting tool for factories, docks, warehouses and transportation.

RCYB suspended permanent magnetic iron separator | Series Permanent magnetic Separators

Product Description

Handy Permanent Magnetic Separator RCYB Series

RCYB series is suspended over conveyor belt.It is suitable for continuous-duty occasions and remove 0.1-30kg of ferromagnetic material which mixed in the raw material. This equipment has a high magnetic field intensity, no energy consumption and a long service life. It is easy to install and use without maintenance. This equipment is widely used for the iron removal from non-magnetic materials on belt conveyors, vibrating conveyors, vibrating feeders, chutes, etc.
Handy Permanent Dry Separator Main Features:

-- NdFeB magnets for magnetic source of reliable magnetic properties
-- In the depths of non-magnetic materials can absorb up 0.1-0.30kg iron
-- Core guaranteed 10 years under normal circumstances; Neverless than 5% demagnetization
-- Artificial regularly dumping iron, and is of small size, light weight, easy installation features
Appllication:

The interior of RCYB series suspended permanent magnetic iron separator adopts high coercive force, high residual magnetism permanent magnet "Nd--Fe--B" materials to form complex mag netic system suitable for iron removal of non-magnetic materials on the belt conveyor, vibrating conveyor, electromagnetic vibrat- ing feeder and feeding down-spouting. To remove 0.1~35kg ferromagnetic materials permanent magnetic system in the interior can be used over ten years.
Standard Export Package:

(fixed iron frame with five polywoodboard packing to keep safety long-distance transportation;Don't need to be fumigated.)
Quick Response:

--We highly appreciate your any enquiry by email, fax or instant message.
--We will reply your email or fax within 24 hours.
--Please fell free to call us at any time if there is any questions.
Convenient Transportation:

*All available shipping ways could be applied, by courier, air or sea.
*Appointed shipping company or our own forwarders all could be used in shipment.
*Full-way tracking the cargos for you till the goods arrive.

ITEM NO: SPR-XNB11612-12R
*With Short Pull Handles
*With Ipad/Phone Holder
*Computer Main Functions : Scan,Time,Calories,Distance,Count,T-Cnt,Auto On/Off
*Resistance : 14 Level Resistance with Manual Control
*Rowing Way : Dual Handle
*Rail Type : Single Rail
*Drive System : Two-Step Drive device
*Max Resistance : 40 Kg(Patented external Magnetic)
*Assembly Size : 201.1 x 73 x 104 CM
*Folding Size : 111.7 x 73 x 157 CM
*Carton Size : 117 x 28 x 87.5 CM
*Max User Weight : 120 Kgs

Self-discharge Electromagnetic separator model series LMC12(RCDD) is designed for long term operating shift provided with self-discharge function and semi-sphere shaped magnetic field, installed with continuous operating tramp iron discharging conveyor which helps to throw the attracted magnetic material into the iron collection tray. It is suitable for removing the magnetic iron particles from the thicker bed of the material and material under bigger granularity such as ores, coals, hard cokes, limestone and etc.