Tubular Flow Pump

Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity.
Nominal outlet diameter: 350-3200mm
Head: 0-10m
Flow rate: 0.4-25 m3/s
Power:22-1500kw
Voltage: 380v, 660v 3kv, 6kv, 10kv
Water conditions:
Water temperature=50 deg.C
Ph value: 4-10
Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.

Customised high flow deep well submersible pump,high head well pump,QJ submersible pump Product Overview:. Submersible electric.

Detailed product description
Model: 350qzb-1600qzb, 1000-1400qhb

Power: 5.5-1500 kw

Discharge: 116 -10689 l/s

Head: 1.1-16.44 m (3.6- 54 feet)

Pump outlet diameter: 350-1400mm (13.7-55.1 inch)

Dia. Of impeller: 267-1540mm (10.5-60.6 inch)

Rotate speed: 485-1450 r/min

Angle of impeller installation: from -6 deg. To +6 deg.

Ph value: 6-9

Operating limits:

Maximum ambient temperature 50¡ãc

Motor:

1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor

2. Insulation grade: f

3. Protection grade: ip68

4. Double/triple mechanical sealing

5. Equipped with special control cabinet

6. Voltage: 380-10000v

7. Frequency: 50-60hz

Materials:

1. Pump body: cast iron

2. Impeller: stainless steel

3. Shaft with rotor: #45 steel

Application:

* applied to farm irrigation and drainage, and water supply and drainage for industrial and mine enterprise, dock, civil project and power station, etc.

Advantages:



In wooden box

The flow parts of this multi-stage centrifugal pump are made of all stainless steel and are suitable for pressurized transport.

Detailed product description

Model: qwb, qzb

Discharge: 5 to 6000 m3/h (1.4-1666.7l/s)

Lift head: 6 to 80 m (19.7- 262.5 feet)

Max. Rotary speed: 2900 r/min

Pump outlet diameter: 50-600mm (2-23.6 inch)

Temperature: -5 to +50 deg. C

Maximum system pressure: <1 mpa

Ph value: 2 to 13

Dia. Of passing solid particle: 30-100mm (1.2-3.9 inch)

Maximum immerging depth: 10m (32.8 feet)

Motor power: 1.5 to 400 kw

Performance & advantages:

1) reliable performance

2) high quality, easy operation, applying non-clog impeller, needn¡¯t the pump station.

3) many other special technical innovations: smaller volume, lower noise, saving more energy, easy maintenance, etc

4) with a fully automatic safety protection control cabinet to monitor the operation of the pump.

5) multi-mechanical sealing, high wearability and anti-corrosion material for the friction components, and can run for 6000 hours continuously.

6) with high sensitivity water leakage monitor sensor in the sealing chamber and thermal sensor pre-set in the stator



In wooden box

Submersible sewage pumps are submersible sewage pumps that are particularly suitable for transferring liquids containing hard solids, fibrous materials, and particularly dirty, sticky and slippery liquids. There are two types: AS and AV submersible sewage pumps.

QW submersible sewage pump is a kind of pressure pump with large flow channel anti-clogging hydraulic parts design, which greatly improves the dirt passing ability.

Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available

Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

V4 Borewell Submersible Pumpset
Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and
Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply.
Single Phase available in 0.5 HP to 5.0 HP
Three Phase available in 1.0 HP to 6.0 HP
- Speed : 2880 RPM
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0
- Degree of Protection : IP 58
- Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs,
2.2kW, 7.5 kW -1500 lbs.
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph
Direct Online (D.O.L)
- Maximum Starts Per Hour : 20 Times

V3 Borewell Submersible Pumpset

Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5