Shl-310 Electrical Peeler

Fabrication material: including aisi 304, aisi304l, aisi 316, aisi316l, ss 309, aisi 310,

Aisi 314, etc.
Application: used in sintering, brazing, pharmacy, drying, chemical, glass industry,

Electric, high temperature equipment, heat treating, transit baking industry and food

Processing, etc.
1.Conventional weave; 2.Balanced weave; 3.Double balanced weave; 4, rod reinforced;

5.Duplex weave

Wooden case

Introduction:

The tester is designed according to iso 1974(paper--tearing strength test method), gb455.1, it is mainly used for paper tearing strength test as well as cardboard low-tearing strength test. It can test automatically, lcd displays data.

The tester is incorporated with mechanize and electrization. Its micro-control system adapts to the high precision photoelectric axial coder and micro-control digital circuit which make the man-machine conversation come true. The advantages: advanced technology, complete functions, steady capability, simple operation, etc.

Technical parameter:

1. Range: 10mn~1000mn
2. Tearing arm: 104fa1 (mm)
3. Beginning angle for tearing: 27.5ffa0.5f
4. Beginning cutting length of specimen: 20fa0.5 (mm)
5. Dimension: 450 (l)f¯310 (w)f¯465 (h) (mm)
6. Weight: about 15kg



Plywood carton

EH oil main pump PVH074R01AB10A250000002001AE010A
YOYIK professional production and processing. Deyang YOYIK strong technical force, technical experience, good at operating the technical backbone of many, for hundreds of thermal power plants, hydropower stations, metallurgical enterprises overhaul to provide quality equipment selection, construction design, installation commissioning, after-sales service, and provides A lot of accessories and so on. Deyang YOYIK for power plants, steel accessories are as follows:

Yoyik can offer many spare parts for power plants as below:

#DF-EH oil main pump PVH074R01AB10A250000002001AE010A-DF
AC oil pump 125LY-35-16L
Electromagnetic directional valve 4WE6C-L6X/OFEW220-50NZ4/V
relief valve DBDH6G10/315/2
Hydraulic oil station hydraulic reversing valve MG0011.19.01
solenoid valve 4WMM10G10-FMIV
Accumulator NXQ-AB-32/31.5-L/Y
Oil unloading pump 3G70*2-46W
Governor oil tank airbag NXQ25/31.5-H
Stop valve J61Y-160V
Solenoid valve 9214603\220VAC
Bladder NXQA-10-31.5
Control device for gas-liquid two-phase flow DH-KX DN150 PN6.3
Electric gate valve Z962H-200 WCB
pressure relief valve YSF9-25/25
Check valve H61Y-200
executive agency SKJ-310
Seal/O-ring TRd8.687.547
AST solenoid valve HPS105.203.101
Balls Charging chamber packing ZQ24
sealing ring GTJ300-00-22
Oil baffle 2FK5D32M-05-05
Fusible plug CO46-02-12a
impeller CO46-09-26
Sequence Cartridge valve LC16DB20D-6X
PUMP 3100C-2032C-IFR
pressure hose SMS-10/12-305mm-C
the diaphragm 250ZXN016B
Electric stop valve J961Y-P54150V
Fuel start boiler oil pump 2CY-403/2.5
accumulator seals NXQ-A-F16/20-A
Servo valve G761-3025
servo valve J761-003
Nedle Roller Bearing ZXL NA 4005 CV KPN24
pressure hose S100-AC-FA-0063
Solenoid valve 321F55505A
Accumulator NXQ-A-32-31.5L-Y
EH oil main pump PVH074R01AB10A250000002001AE010A

ZYR-DFYL-2025-3-12

Introduction
The J23-80 puncher press machine is a general punch machine used for pressing sheet metal, which is commonly used in watch, toys, tableware, telecommunications, instrumentation, electrical machine, automobile making and so many other fields.
When the press machine is equipped with the automatic feeding device, it can carry out semi-automatic pressing. The nominal force of the equipment occurs 5mm distance from the slider to bottom dead center. In the design of cold pressing process, the working rules are selected according to the pressure curve diagram. When selecting, the intersection between use pressure and corresponding crank angle must be within the scope of strength.
Technical Parameter
Item Units
Nominal pressure KN 800
Nominal stroke mm 7
Slide stroke mm 130
Stroke number min-1 40
Mold set height mm 390
Mold height adjusting amount mm 80
Slide block central distance mm 310
Working table size Front and back mm 570
Left and right mm 860
Working table hole size Front and back mm 310
Left and right mm 450
Diameter mm 400
Sliding block underside size Front and back mm 360
Left and right mm 400
Die shank hole size Diameter mm 60
Depth mm 70
Stand column distance mm 400
Working table thickness mm 85
Inclination Angle 20
Boundary dimension Front and back mm 1990
Left and right mm 1500
Height mm 2960
Motor power KW 7.5
Weight Kg 5800

Model ZM-90
Power Honda GX690 24HP
Blade size 310*150*2mm
Blade quantity 10
Blade pitch 65-120mm
Disc diameter 900mm
Dimension 1900*950*1180mm
Total weight 430kg
Rotational speed 140r/min-180r/min
Operating mode Driving type
Starting system Electric start
Fuel Tank Capacity 20L
Lubricating oil volume 1.5L
Engine type Two cylinder oil air-cooled
Automatic water spray Yes
Construction lighting Yes
Walking wheels Lift type

Welding Range: 10-20
Cooling Way: Air Cooling
Control: Semi-Automatic
Frequency Range: Line Frequency
Electric Current: AC
Type: Butt Welding
Deliver Time: Negotiation
Trademark: dingjuquanqiu
Transport Package: Wooden Case
Specification: 420*310*1100(mm)
Origin: China

Welding Range : 10-20
Cooling Way: Air Cooling
Control: Semi-Automatic
Frequency Range: Line Frequency
Electric Current: AC
Type: Butt Welding
Deliver Time: Negotiation
Trademark: dingjuquanqiu
Transport Package: Wooden Case
Specification : 420*310*1100(mm)
Origin: China
HS Code: 8525809090

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, around 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4.
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, arround 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4.
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.