Mica Shield And Gauge

Mica in its processed form is one of the most versatile used materials. For over seven decades we have been processing the natural raw mica rocks to the widely used mica sheets for applications ranging from power electronics to consumer electronics.

They are made with cut condensor films that are thoroughly cleaned with the help of dc-greasing agents and are then silvered on both sides by screen printing process. There is perfect adhesion between mica and silver which results in optimum performance of the plates.

Mica flakes is mica scrap grinded into sizes ranging from 2 mesh to 30 mesh. Natural mica flakes is prepared by rotary hammer crushing machine. Mica flakes are primarily used in industries involved in the manufacturing of pearlescent pigment, concrete block fillers, refractory bricks, asphalt roofing felts, etc.

Mica flakes also vary in quality based on the quality of the mica scrap used for production. We manufacture flakes of three different qualities:

High quality made from mica scrap tested to withstand temperatures above 900 degrees C & completely white in color.
Medium quality of tested mica scrap that has a less stringent requirement of color.
Untested mica flakes without any testing temperature requirement.

Block Mica is knife-dressed mica with a minimum thickness of 7 mils (0. 18 mm). Block Mica is available in sizes up to 12 to 14 (30 to 35 cm) square. Block Mica larger than this is rare and even it was available it would be far too costly for most applications. Block Mica is available in sheets with an average thickness between 7 mils & 30 mils (0. 1 8 mm & 075 mm) Block Mica is supplied in both natural (random) and calibrated thickness as required by the customer. After splitting into a specified thickness the mica is then cut and punched to the required size and shape to meet the requirements, typically, of an electrical application.

We are engaged in offering a wide range of mica shields and mica gaskets which is widely used in the protection of gauge glasses. They protect these gauge glasses under high pressure situations and for flexible control of water and other fluids. These shields are produced using high quality muscovite natural mica taken from our mines and the raw materials are punched and cut with high accuracy for perfect dimension and thickness.

Our mica shields and gaskets provide good strength, service life for glasses and can monitor the degree of combustion in blast furnaces in various steam boilers. With the help of high optimum visibility clear readings of water or steam in boiler drums can be observed safely. Mica gaskets can be used as good thermal insulation in electronic components and are applicable up to instead of 1800�?�°F use temp in C. (i.e. 983C). Our mica shields and mica gaskets are well known for their properties like good tensile and bending strength, resistance against corrosion and low heat conductivity.

Features of Mica Shields & Mica Gaskets
Increases the service life of sight glasses.
Hard, flat and transparent.
Free from air inclusions.
High optimum visibility

Applications of Mica Shields & Mica Gaskets
They provide clear vision of liquid levels in turbines, flow indicators, boilers and heaters.
They are also used in gas turbines and exhaust pipes.
Used in the protection of gauge glasses

Fabricated mica

Mica : Used for perlescent pigment, mica blocks, mica powder, mica flakes

Mica splitting

Pieces of medium quality mica having a thickness of less than 1 mil are classified as mica splitting. These splitting are supplied either "Bookform" type or "Loose" type. These splitting are used in the manufacture of Micanite related products .