Auto Pallet Vertical Strapping

1. Designed for strapping bottles, cans and boxes horizontally together on pallet packaging Safe for products.
2. Automatic up-down control to proper position by standard geared motor.(Option : Power Cylinder Type)
3. Safety guide equipped to prevent collision between irregular products and arch.
4. Strapping section is normally controlled by adjusting limit switch. (with range)

Specification:

Model SWAP7-OLHE
Dimensions (W)3500, (D)3000, (H)3100
Package Size (W)1000-1300, (D)700-1200, (H)1000-2350 (FORM FLOOR)
Sealing Method HEAT SEALED
P.P Strap Width 15.5, 18mm
Speed 12sec/strap
Tension Strength above 70kg with in 0-90mm STROKE
Machine Weight 1500kg
Power Supply 220/380V 3Phase, 60Hz, MOTOR 1.9Kw

PLC
Photo-eye auto-height sensing pallet height
Separate top ,bottom & up-down Wrap Counter Selector
Overwrap time is set to create an overwrap
Reinforce wrap times is set to better secure 2 loads placed on top of each other
Film Tension Control adjustment on the panel
Separate start, pause and emergency stop buttons
Power indicator
Manual carriage up/down
Variable Turntable Speed
Carriage up/down speed control
Manual/automatic exchangeable
Turntable

1650mm diameter structural steel plate
85mm height floor to top of turntable

Turntable drive

0-12rpm variable turntable speed by frequency changer
position turntable alignment
soft start

Film carriage

powered pre-stretch system up to 200% to min film consumption
carriage door opens for effortless roll change and thread film
film delivery variable speed by separate dc drive motor
electronic film tension control adjustment on panel
film dancer-bar with variable speed output

Film carriage drive

heavy duty double-chain carriage lift, calm and safety
film carriage variable speed by frequency changer


Option

ramp
top plate
auto film attach and cut off system
packing height:1800, 2400mm
turntable diameter: 1800mm, 2000mm

Packing height(max) 1800mm
Packing efficency 20-40loads/hour
Turntable speed 0-12rpm
Turntable diameter dia.1650mm height85mm
Turntable loading(max) 2000kg
Machine weight 700kg
Machine dimension 2545mm1650mm2270mm
Power/voltage 0.75k ac220v


Wooden or iron case

The semi-automatic strapping machine in our factory adopts advanced stainless steel frame, uses new integrated circuit and access PC board to control the whole packaging action. The strapping speed is very fast, and each strapping speed takes only 2.0 seconds; And instantaneous heating can make the heating plate work within 5 seconds and enter the best packaging state, which is power-saving and practical; And coated with heat-resistant and low temperature resistant coatings, which can operate in any environment.

Controls

* plc
*photo-eye auto-height sensing pallet height
*separate top , bottom & up-down wrap counter selector
*overwrap time is set to create an overwrap
*reinforce wrap times is set to better secure 2 loads placed on top of each other
*film tension control adjustment on the panel
*separate start, pause and emergency stop buttons
*power indicator
*manual carriage up/down
*variable turntable speed
*carriage up/down speed control
*manual/automatic exchangeable



Max load size(mm) 1200(l)x1100(w)x1800(h) (standard)
Turntable speed 0-12rpm
Turntable diameter 1650mm
Turntable height 85mm
Turntable weight capacity 2000kg
Machine dimensions (mm) 2745( l)x1650( w)x2800 (h)
Machine weight 700kg
Power supply 220v 50hz 1phase (standard)
Material lldpe - stretch film

Auto taping and strapping machines perform the twin allied actions of taping and strapping cartons for safe and secure distribution. With adjustable strap widths and flexible cycle times and effortless loading and unloading operation, these workhorses ensure high throughput. Moreover, the range of Auto taping and strapping machines from Bricspac can be combined with other packaging installations, and the results are instantly palpable.

china coal 0001
Introduction of YK1650CS Top Plate Auto Pallet Wrap Machine
YK1650CS Top Plate Auto Pallet Wrap Machine adopted advanced Photo-eye auto-height sensing system to adjust pallet height. Separate top ,bottom & up-down &reinforcement Wrap Counter Selector0-9.

Features of YK1650CS Top Plate Auto Pallet Wrap Machine
*PLC control
*Over-wrap count to create a cover
*Reinforce wrap count to keep goods stable
*Film Tension Control adjustment on the panel
*Separate start, pause and emergency stop buttons
*Manual carriage up/down control
*Variable Turntable Speed control
*Carriage up/down speed control

Parameter of YK1650CS Top Plate Auto Pallet Wrap Machine
Turntable diameter 1650mm
Turntable speed 0-12rpm
Turntable Height 85mm
Turntable weight capacity 2000kg
Power supply 220V 50/60HZ 1Phase (standard)
Air consume lever 0.6-1.0Mpa
Wrapping Height 1000-1800mm
Packing efficiency 20-40 loads / hour
Material LLDPE Stretch Film
Film Thickness 17-35 m
Film Width 500 mm
Core Diameter 76.2 mm
Machine weight 650 / 700kg
Machine dimention 2450mm*1500mm*2750mm
Package Dimention 2845mm*1650mm*1150mm
Maximum Film. Diameter 260 mm
Max. weight of film roll 15 kg

china coal 0001
Introduction of XT4502 Automatic Stretch Film Pallet Wrapping Machine
1. XT4502 Automatic Stretch Film Pallet Wrapping Machine adopts Contractors as its Control system.
2. Turntable speed is adjustable
3. Film carriage is mechanical brake.
4. Precise phase stopping at cycle end
5. Top and bottom limit switches to find pallet height
6. XT4502 Automatic Stretch Film Pallet Wrapping Machine also designed with Manual control
Parameter of XT4502 Automatic Stretch Film Pallet Wrapping Machine
Machine size (LÃ?WÃ?H):2550Ã?1500Ã?2500mm
Machine weight 530kg
Wrapping height 2100 mm
Turntable diameter 1500mm
Turntable height 80mm
Turntable load weight Max2000kg
Film size W: 500mm   thickness: 12-35Microns
Diameter of film Inner diameter:76mm   external diameter: Max350mm
Turntable speed 0-10cycles/min(adjustable)
Power 1.2kw/380V 3phase

Controls

* plc
*photo-eye auto-height sensing pallet height
*separate top , bottom & up-down wrap counter selector
*overwrap time is set to create an overwrap
*reinforce wrap times is set to better secure 2 loads placed on top of each other
*film tension control adjustment on the panel
*separate start, pause and emergency stop buttons
*variable turntable speed
*carriage up/down speed control

Turntable

*1650mm diameter structural steel plate
*85mm height floor to top of turntable

Turntable drive

*0-12rpm variable turntable speed by frequency changer
*position turntable alignment

Film carriage

*powered pre-stretch system up to 200%
*carriage door opens for effortless roll change and thread film
*electronic film tension control adjustment on panel
*film dancer-bar with variable speed output

Film carriage drive

*heavy duty double-chain carriage lift, calm and safety
*film carriage variable speed by frequency changer


Option

*ramp
*top plate
*auto film attach and cut off system
*packing height: 2400mm
*turntable diameter: 1800mm, 2000mm


Packing efficiency 20-40 loads / hour
Max load size(mm) 1200(l)x1100(w)x1800(h) (standard)
Turntable speed 0-12rpm
Turntable diameter 1650mm
Turntable height 85mm
Turntable weight capacity 2000kg
Machine dimensions (mm) 2745( l)x1650( w)x2800 (h)
Machine weight 700kg
Power supply 220v 50hz 1phase (standard)
Material lldpe - stretch film
Film thickness 17-35 ¼
Film width 500 mm
Core diameter 76.2 mm
Maximum film. Diameter 260 mm
Max. Weight of film roll 15 kgs

Controls features:

* plc
* packing height control with limiting switch.
* top & up-down wrap times 0-3 can be chosen
* adjustable mechanical tensioning brake
* power on/off switch and indicator
* manual carriage up/down
* variable turntable speed
* carriage up/down speed control
* manual/automatic exchangeable



Turntable speed 0-12rpm
Packing efficiency 20-35 loads / hourv
Max load size(mm) 1200 (l)x1100(w) x2400(h) (standard)
Turntable diameter 1650mm
Turntable height 85mm
Turntable weight capacity 2000kg
Machine weight 600kg
Power supply 220v 50hz 1phase (standard)
Machine dimensions (mm) 2625( l)x1650( w)x2895( h)