Cenosphere

We deals in the following Chemicals :-

Alumina Silica ( Cenosphere ) Powder
Fly Ash Powder
Ilmenite (Synthetic Rutile)
Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide )
Barite Powder, Barite Ore
Dolomite Powder
Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets
Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits
Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay
Calcium Carbonate Powder
Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells

Cenosphere.

Cenosphere:

A cenosphere is a lightweight, inert, hollow sphere comprised largely of silica and alumina and filled with air and/or gases. Cenospheres are a naturally occurring by-product of the burning process at coal-fired power plants, and they have most of the same properties as manufactured hollow-sphered products.

Typical Properties of Cenospheres

SiO2: 52 - 62%
Al2O3: 32 - 36%
K2O: 1.2 - 3.2%
Fe2O3: 1 - 2%
TiO2: 0.8 - 1.3%
MgO: 1 - 2.5%
Na20: 0.2 - 0.6%
CAO: 0.1 - 0.5%

CENOSPHERE
A cenosphere is a lightweight, inert, hollow sphere comprised largely of silica and alumina and filled with air and/or gases. Cenospheres are a naturally occurring by-product of the burning process at coal-fired power plants, and they have most of the same properties as manufactured hollow-sphered products.

Typical Properties of Cenospheres
SiO2 52 - 62%
Al2O3 32 - 36%
K2O 1.2 - 3.2%
Fe2O3 1 - 2%
TiO2 0.8 - 1.3%
MgO 1 - 2.5%
Na20 0.2 - 0.6%
CAO 0.1 - 0.5%
Physical Properties
Specific Gravity(g/cc) 0.65 - 0.75
Bulk Density(Kg/M3) 350 - 450
Hardness(Moh's) 5 - 6
Compressive Strength(Kg/cm2) 180 - 280
Shape Spherical
Color Light Grey Light Buff
Melting Point 1350C
pH in water 6 - 7
Moisture 0.5% Max
Sinkers 3% Max
Oil Absorption 16-18 G/100G
What Are The Advantages of Using Cenospheres?
Manufacturing Benefits: The spherical shape of Cenospheres improves flowability in most applications and provides a more even distribution of the filler material. The natural properties of Cenospheres make it possible to use them either in dry or wet slurry form. Cenospheres are easy to handle and provide a low surface area-to-volume ratio. Due to their inert properties, they are not affected by solvents, water, acids, or alkalis. Cenospheres are 75% lighter than other minerals currently used as a filler or extender and are 30 percent lighter than most resins.

Lowered Cost: Utilization of Cenospheres reduces the cost of manufacturers' raw materials. The savings may be recognized in one or more of the following benefits:
Reduced Raw Materials
Cost Improved Flowability
Reduced Resin Demand
Improved Insulation Values
Resistant to Resin Absorption
Reduced End Product Weight

General information:
Physical & chemical properties - cenosphere cs-300

Size 1-500 microns
Ph in water 6.0 - 8.0
Bulk density 400-450 kgs/cbm
Compressive strength 1500 - 3000 psi
Melting point > 1200 degrees celsius
Shape spherical
Moisture 0.5% max
Specific gravity 0.75-0.85 g/cc
Sinkers 5% max
Sio2 55-65%
Al2o3 30-36%
Cao 0.1-0.5%
K2o 1.2-3.2%
Fe2o3 1.0-3.0%
Tio2 0.8-1.3%
Mgo 1.0-2.5%
Na2o 0.2-0.6%

25kg

Khetan group is manufacturer and global supplier of processed cenosphere .We manufacture clean and graded cenosphere which have high compressive strength.The true density consistency will always give the result as expected.Our cenosphere provide all the benefits which are same as microsphere and can improve the properties and performance of many formulated products.

Size 0-550 microns (30mesh)

Bulk density 0.3-0.5g/cm©ø

True density 0.90-0.95g/cm©ø

Compressive strength 28mpa min

Moisture 0.5% max

Floating rate 95% min by volume

Specific density: 0.90-0.95g/cc

Appearance grey/white powder

Mosh scale 5-7

Ph 6

Coefficient of heat conductivity 0.054-0.095w/m.K

Refractive index 1.54

Melting point 1400¡é min

Loss on ignition at 1000¡é < 3%

Refractoriness 1550-1750¡é



25kg/pp bag

After they are harvested, they get dried and screened.

500kg polythene bag

Cenosphere.

Cenospheres

Jumbo Bags 500 - 600 kgs