Melting point -46 �°C
Boiling point 209-210 �°C(lit.)
density 0.806 g/mL at 25 �°C(lit.)
vapor pressure 12.4Pa at 20�ºC
refractive index n20/D 1.4359(lit.)
Fp 165 �°F
storage temp. Sealed in dry,Room Temperature
solubility miscible
form Liquid
pka 10.07�±0.28(Predicted)
color Clear colorless to yellow
Water Solubility miscible
LogP 1.99 at 23�ºC
Melting point -46 C
Boiling point 209-210 C(lit.)
density 0.806 g/mL at 25 C(lit.)
vapor pressure 12.4Pa at 20 C
refractive index n20/D 1.4359(lit.)
Fp 165 F
storage temp. Sealed in dry,Room Temperature
solubility miscible
form Liquid
pka 10.07 0.28(Predicted)
color Clear colorless to yellow
Water Solubility miscible
LogP 1.99 at 23 C
1.Usage: N, N-dimethylformamide (DMF) is widely used as drug solvent. N, N-dimethylformamide is a dipole prophilic solvent with physical and chemical properties, so it is suitable for capillary electrophoresis (CE) solvent.
N,N- dimethyl acetamide is a clear colorless liquid, flammable. Can be mixed with water, alcohol, ether, ester, benzene, and aromatic compounds and other organic solvents. The boiling point of 166 �ºC. Freezing point -20 �ºC. Relative density 0.9366. Refractive index 1.4380. Flash point 70�ºC (open cup).
Dimethylacetamide, the full name is N,N-dimethylacetamide (chemical formula: CH3C(O)N(CH3)2 abbreviated as DMAC or DMA. A commonly used aprotic polar solvent. Colorless Transparent liquid, flammable. Can be freely mixed with organic solvents such as water, alcohol, ether, ester, benzene, and aromatic compounds. Used in the preparation of drugs, synthetic resins, and also used as a solvent for polyacrylonitrile spinning and carbon Extractive distillation solvent for the separation of styrene in eight fractions, etc.
N-heptane is an organic compound with a chemical formula of C7H16. It is a colorless, transparent and volatile liquid, insoluble in water, soluble in ethanol and carbon tetrachloride, and miscible in ether, chloroform, acetone, and benzene. It is mainly used as Standards and solvents for determination of octane number can also be used in the preparation of organic synthesis and experimental reagents.
N,N-Dimethylaniline DMA CAS 121-69-7 is an organic chemical compound, a substituted derivative of aniline. It consists of tertiary amine, featuring dimethylamino group attached to a phenyl group. It is an important precursor to dyes such ascrystal violet.
N,N-Dimethylaniline is yellow to brown colored oily liquid with a fishlike odor. Less dense than water and insoluble in water. Flash point 150�°F. Toxic by ingestion, inhalation, and skin absorption. Used to make dyes and as a solvent.
Specification
Appearance Colorless to pale yellow oil liquid
Assay â?¥99%
Aniline assay â?¤0.3%
N-methyl aniline â?¤ 0.5%
Water and others â?¤ 0.2%
Application
1) As dyes intermediate used for the manufacture of vanillin, azo dyes, triphenylmethane dyes etc. As an important intermediate for dyestuff, mainly used in the production of triphenyl methane dyestuff, also as solvent, antiseptic for metal, solidity for epoxy resin and polyester, and catalytic promoter for polyreaction of ethylene chemical compound.
2) In medical industry, it is used in the production of cephalosporin V, sulfanilamide -6-methoxamine pyrimidine, fluorine pyrimidine.
3) In perfume industry, it is used in the production of vanilla, as well as the vulcanized agent for rubber or the raw material for dynamite and some organic intermediates.
N-(n-butyl)-thiophosphoricTriamide(NBPT)
Urease inhibitors can inhibit the activity ofsoil urease, which can inhibit and slownitrogen release. The use of soil ureaseinhibitors can effectively slow down theprocess of urea decomposition intoammonia, reduce the concentration ofNH4+ and NH3 in the soil, reduce waste,and at the same time Extend the diffusiontime of nitrogen fertilizer at thefertilization point, so that the fertilizersupply of the soil and the fertilizerdemand of the crop are synchronizedThereby increasing the effective utilizationrate of nitrogen fertilizer by 30%-40%.
Item Specification
Appearance White cystalline solids or white powder
Content 97%min
Melting point 57-60 C
Flashing point 96 C
Boiling point 277.4 C(760 mm Hg)
Density 4.3 g/L at 25 C
Loss on drying 1.0% max
Metal cutting fluid bactericide MBM is a slow-release bactericide with broad spectrum and high efficiency and a certain gas-phase sterilization ability. It is suitable for inhibiting the growth and reproduction of microorganisms in various humid environments, preventing the generation of putrefaction and foul odors, and ensuring safe operation of the system.
Sexual fungicide, the product has good solubility, suitable for oil and water based systems.
In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.
MBM is a new generation of broad spectrum and low toxicity developed for water-based metalworking fluids
Sexual fungicide, the product has good solubility, suitable for oil and water based systems.
In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.
MBM is effective against both gram-negative and Gram-positive bacteria. MBM is effective against both gram-negative and Gram-positive bacteria.
N-butyl chloride is also known as 1-chlorobutane,an organic compound,a colorless liquid,insolublein water. In the pesticide industry,it is mainly used in the synthesis of pesticides Nitriconazole.In the pharmaceutical industry,it is used in the production of intermediates ofmedicine pautaxone and animal repellents.In the synthetic rubber industry,it can be used in the preparation of catalyst butyl lithium.In the organic chemical production,it can be used in producing dibutyl aluminum laurate,as the solvent of some insolublecompounds,such as methylxanthone,polyether and other production solvents.In theanalytical chemistry,it can be used in producing butyl cellulose butylation reagent,etc.
S-butyl chloride is also known as 2-chlorobutane. It is an organic compound,a colorless liquid,and insoluble inwater. It is organic synthesis intermediates and solvents.it can be used in drugs,plasticizers,insecticides,rubber,resins,surfactants.It is also the main raw material for the preparation of dibutylmagnesium,sec-butyl and di-sec butyl disulfide.
