Filter Cartridge

OD 6 152.4mm
L 40 1016mm 60 1524mm
Flow 110m3h 60
Rate 1,3,5,10,30,50,70 Micron.
Material PP Glass fiber
Replacement PALL Pentair, Aquatec, Eaton, Graver, Mahle, Aqua

RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media in between, it removes sediments as well as organic pollution from water.

Specification

RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction.

Features

NSF Certified activated carbon
High flow rate
Low pressure drop
Rapid dechlorination

Technical data

Maximum temperature

PP , Melt blown filter cartridge, 5 micron.
ID:1.1(28mm)
OD:2.5(63mm)
L:10 (254mm)

sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to 750F (399C) in oxidizing and 900F (482C) in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available.

Product Introduction


The SUS316L powder sintered filter cartridge is a type of filter cartridge used for filtration in various industries such as pharmaceuticals, food and beverage, electronics, and water treatment.
The L stands for low carbon content, which further enhances its resistance to corrosion and makes it suitable for use in environments that are prone to corrosion.
The SUS316L powder sintered filter cartridge is made by compressing and sintering stainless steel powder to form a porous structure with uniform pore size and distribution. This structure allows forhigh flow ratesand efficient filtration of particles and contaminants from fluids.


Features
1. High filtration efficiency: The multiple layers of stainless steel mesh provide a high filtration surface area, which results in a high filtration efficiency.
2. High-temperature resistance: SUS316L stainless steel can withstand high temperatures, which makes it ideal for applications where high-temperature resistance is required.
3. Long service life: The sintered metal powder structure of thefilter cartridgeresults in a high-strength, durable filter that has along service life.
4. Wide range of applications: SUS316Lpowder sintered filter cartridgesare suitable for a wide range of applications, including in the chemical, pharmaceutical, food, beverage, and water treatment industries.


Applications
SUS316L powder-sintered filter cartridges are commonly used in applications where high-performance filtration is required, and where the filter cartridge needs to withstand high temperatures, pressures, and corrosive environments.


Pharmaceuticals: SUS316L powder sintered filter cartridges are commonly used in pharmaceutical manufacturing processes to filter out contaminants and impurities from liquids, including water, solvents, and drug formulations.


Food and beverage: In the food and beverage industry, SUS316L powder sintered filter cartridges are used to filter out impurities from liquids such as juices, beer, and wine, and to remove particulate matter from cooking oils.


Electronics: SUS316L powder sintered filter cartridges are used in the electronics industry to filter out particulate matter from chemicals and solvents used in the manufacturing of electronic components.

Water treatment: In water treatment plants, SUS316L powder sintered filter cartridges are used to filter out impurities and particles from water, including sediment, bacteria, and other microorganisms.

Polypropylene pleated filter is the product for large flow having maximum filtration area due to its continuous pleated structure, and not only has long service life by the precision filtration performance (more than 90%) and low differential pressure, but also does not have breakaway of the filter materials and matter erupted by making out perfect structure to prevent solution leak with structural stability through heat sealing.


Inner diameter:28mm
Outer diameter:70/83/130mm
Length:10"/20"/30"/40"

Membrane pleated filter cartridge

Matterial:pp od.:º¦69mm id.:º¦28mm length:10" end cap options: 1.Single open end 2.Double open end 3.222 o-ring with flat/fin end 4.226 o-ring with flat/fin end

Description

The large diameter geometrical design of polypropylene pleated high flow filter cartridges enlarge surface filtration area, high dirt holding capacity to save the quantities of filter cartridges, high flow rate when filtration efficiency exceed 99%. high flow filter cartridges are wide range of chemical compatibility and applications, the ideal option for industrial high flow water filtration system to protect RO membrane.

Feature
1. Gradient pore structure of high flow filter cartridges provide layered filter function
2. Outer hard cage can withstand higher pressure than Pall Ultipleat high flow filters made by soft netting
3. High flow filter cartridges are high filtration efficiency, lower waste disposal costs and more economical
4. Inside to outside filtration pattern of high flow filters ensure holding all impurities stay inside the pleated media
5. The highest flow rate of high flow filters could get 110 M3/H and Beta 5000 rated (99.98% efficiency)
6. The reduction of filtration system space maximum 50% and lower maintenance costs when use high flow filters
7. Materials meet FDA requirements, wide chemical compatibility, no resins, binders, or adhesives and 100% integrity testing

Application
1.Paints and coatings
2. Microelectronic, film and resin
3. Water treatment in Power generation
4. RO Pre filtration and sea water desalination
5. Solvents, API and water filtration in Bio field
6. Bottled water, high fructose, edible oil, soft drink and milk

Hollow fiber UF filter cartridge

Item
UF-8040

Module size(mm)
Dia.ª¦201

Length 1016

Fiber materials
Polypropylene-PP Polyethylen-PE

Shell materials
UPVC

Fiber dimesions
OD. 0.5mm/ ID. 0.4mm

Fiber filtration model
External force (Outside-In filtration)

Fiber membrane area(¬O)
80.5

MWCO(Daltons)
10000-100000

Initial flux(t/h)
í¦7.0

Tab/Well water designed flux(t/h)
2.5-3.0

Surface water designed flux(t/h)
2.0-2.51

Grey/Waste water designed flux(t/h)
1.8-2.0

Feed turbidity required
<100NTU

Filtrate SDI
<2

Filtrate turbidity
<0.2NTU

TOC removal rate
5-40%

Removal>0.2um particles
100% Under MWCO 80000 dalton

Coliform removal
Not found in each 100ml water sample

Bacteria removal
Not found in each 100ml water sample

MAX.feed pressure
0.3Mpa

MAX.pressure drop
0.2Mpa

Recommendatory pressure
0.06-0.15Mpa

Operating temperature
5-45íµ

PH range
1-14

Operating model
End flow or cross flow