Model no. : RAU-123
Product name : portable autoclave
Specification :
Type portable
Voltage ac 110/230v
Power supply 1kw
Designed temperature 140ªc
Sterilizing temperature 121~128ªc
Sterilizing pressure 1.2~1.6 kg/cmª
Chamber size 23x42cm
Chamber capacity 17 liters
Auto dry no
Auto add water no
Safety device yes
N.W. 18 kgs
G.W. 25 kgs
Packing (lxwxh) 60x34x42cm
Standard accessories :
Sterilizing box 1pc
Sterilizing tray 1pc
Heating element 1pc
Silicone door seal 1pc .
Model no. : rau-123
Product name : portable autoclave
Specification :
Type portable
Voltage ac 110/220v
Power supply 1kw
Designed temperature 140ªc
Sterilizing temperature 121~128ªc
Sterilizing pressure 1.2~1.6 kg/cmª
Chamber size 23x42cm
Chamber capacity 17 liters
Auto dry no
Auto add water no
Safety device yes
N.W. 18 kgs
G.W. 25 kgs
Packing (lxwxh) 60x34x42cm
Standard accessories :
Sterilizing box 1pc
Sterilizing tray 1pc
Heating element 1pc
Silicone door seal 1pc.
Water Immersion Retort is usually composed of upper vessel and lower vessel. The top one is used to store preheated process water and recycle the hot process water before cooling process. The bottom one is the retort for sterilization.
After the food containers were loaded into the baskets and enter the retort, the preheated process water is delivered into the retort through water spreader on the top of retort, the water level was controlled and monitored by water level gauge outside the retort.
The steam enter the retort through the water spreader or additional steam spreader and heat the process water continually until the temperature rise to scheduled sterilization temperature.
The circulation pump recycle the hot water with a high speed and assure the uniform heat distribution inside the retort.
After the sterilization is completed, the hot water will be recycled to the top tank and stored for next batch sterilization. Then the cooling water will be filled into the retort directly to make the food container cool down.
Features in Steam Sterilization
•Drgonomic design for easy operation
•High quality components
•Fully automatic operation
•Microprocessor based controller
•Built in digital adjustable timer with memory programs
•Mechanical controlled door
•Safe to use
Safety Standard for Steam Sterilization
•Pressure switch for additional safety.
•Cycle will not start unless door is closed completely.
•Safety high pressure release valve.
•Door will not open while chamber is pressureized.
•Low water indication when reservoir is empty.
•Door open indication when door is not closed.
•Mechanical controlled door to prevent door from opening during pressurized process.
Overall Dimensions: 560(W) x 580(D) x 400(H) mm
Chamber Dimension:
Chamber Capacity: 16L:260x288mm;20L:260x360;24L: 260x432mm
Power Consumption: 230Vac 2000W / 230Vac 1852W
Sterilization Temperautre Pressure: 121°Cto 20-60mins; 134°Cto 4-60mins
Dry Time: 0-60mins
Standard Accessories: Sterilizing Cassette x1
Weight: 50kgs.
Model No. : RAU-123
Product Name : Portable Autoclave
Specification :
Type Portable
Voltage AC 110/220V
Power supply 1KW
Designed temperature 140C
Sterilizing temperature 121/128C
Sterilizing pressure 1.2/1.6 kg/cm
Chamber size 23X41cm
Chamber capacity 17 Liters
Auto dry No
Auto add water No
Safety device Yes
N.W. 18 KGS
G.W. 25 KGS
Packing (LxWxH) 60X34X42cm
Standard Accessories :
Sterilizing box 1pc
Sterilizing tray 1pc
Heating element 1pc
Silicone door seal 1pc
SINGLE WALL WALL VERTICAL AUTOCLAVE 650mm Dia X 975mm height (TOTAl CHAMBER SIZE)
Working Chamber Size : 625mm Dia X 800mm height
Total Chamber Volume:322 Liter(approx.)
Working Chamber Volume: 230 Liter(approx.)
Salient Features
Common chamber for steam and water
chamber made of stainless steel SS 304 grade having 4 mm thickness.
Lid, flange & bottom sheet also made of stainless steel. All joints argon welded.
Bakelite Nut (Knob) Type locking system for Top Entry
Joint less silicon gasket
Heavy duty industrial flange heater 9kw.
Temperature Sensor : PT - 100
Design Pressure: 3 kg/cm2
Testing Pressure: 2.5 kg/cm2
â?¢ Maximum Working Pressure: 1.2Kg/cm2
Sterilization Pressure range : 1.2 kg/cm2(15 Psi At 121°C)
Temperature Range : 121°C to 135 °C
Lid fitting pressure gauge (2.5 KG/CM2), safety spring loaded ,pressure Release valve.
Complete unit is Hydraulically tested at (2.5 kg/cm2) pressure.
-An automatic high pressure rapid sterilizer which works with steam as medium.
-Can be widely used in department of stomatology and ophthalmology, operating room, CSSD.
-Suitable for all (un)wrapped solid instruments, A-class cavity instrument (Dental hand piece), implantable instruments, dressing fabric and rubber tubes, etc.
-Stainless steel 304 chamber structure: cylinder, horizontal, single door.
-Door opening method: automatic, press button.
-High efficient WJS (water ejector) vacuum system, which supply high speed vacuum and low working noisy, vacuum lower limit can reach over -90kPa in short time, perfect drying performance through sterilization.
Device / Programs:
- 8 preset cycles
- Cycle time: 45-60 min, according to different loadings
- Pressure display: Analogue pressure gauge for chamber on right side
- Temperature display: Digital Temperature Display on the front panel (LCD screen)
- Built-in steam generator: Double Instant steam generator
- Integrated programmable PLC control system with 3.2 inch LCD screen display and capacitive induction buttons enables intuitive operation. It shows the pages which are: main menu, library cycles, cycle parameters, process control, display of temperature, pressure, time, running process, error and alarm information, various of messages (working status, temperature, pressure, vacuum, etc.)
Installation
- Designed Pressure: -0.1~ 0.3 MPa
- Vacuum low limit: -0.09 MPa
- Vacuum pulses counts: 0~99 items
- Designed Temperature: 144�° C
- Working Temperature range: 105-138�° C
- Power Supply: control Power: AC 220V �± 10% single phase 50/60 Hz
- Input power: 2.6kVA (24L) or 6.8kVA (45L) or 7.4kVA (60L)
- Water pure supply, inner circulation, with open type water tank with removable cover makes it easy to be cleaned
Data Saving:
- Sterilization cycle data (batch number date/time, temperature/pressure progress and sterilization phase) can be printed using an integrated micro printer (optional) via RS232 serial port
- Data can also be stored via U disk (optional), stores up to 10 000 sterilization cycles
- WI-FI module allows real time transmission of cycle data and cycle progress information to a PAD for online monitoring (documented data both graphically and numerically and can be used for control of autoclaves)
We can manufacture all kinds of steam sterilizer.
Including horizontal cylindrical pressure steam sterilizer, vertical pressure steam sterilizer, table top steam sterilizer and vaccum steam sterilizer.
Skype: brusezhang95
Our company is a professional factory specializing in producing food retort sterilizer and other food processing machine for 20 years. And we are pleased to supply our professional services and efficient machine to you. Our machine has the advantages of high efficiency, energy saving, low noise, convenient operation and labor saving. It is your powerful assistant to improve efficiency and gain more profits.
Video about our factory:
https://youtu.be/ofZBoLlqHXk
And from the link below, you will find the high quality of our equipment.
https://youtu.be/Y2bcMtNO-54
Welcome to our website www.wogoal.en.alibaba.com for more information.
Any questions, please contact me at any time.
Thank you & best regards!
