Please click here to check who's online and chat with them.

10/100/m Fiber Media Converter, Dual Fibe

Supplier From China
Mar-30-13

Optic Fiber Media Converter 10/100BaseT/TX to 100BaseFX external power supply
Features
Supports auto MDI/MDIX crossover
1K MAC address can be storage, and automatic updated
Supports 10/100M, full/half duplex auto- negotiation
Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard
More than 50,000 hours MTBF
Supports over-sized packets up to 1600Bytes
Full duplex-flow control, Half duplex-back pressure
Link fault pass through function
Full-positioned LEDs to indicate power and network status
Same card on rack mounted and desktop
FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark
Throughput @ 100Base: 148,800 pps (64-byte packets)
Multimode or Singlemode; single fiber or dual fiber optional
Transmission distance is from 2KM up to 120KM
Network broadcast storm protection function
High quality optical modules and chips with working stability
Specification
Standard
IEEE802.3 (10BASE-T)
IEEE802.3u 100BASE-TX/FX (Fast-Ethernet)
IEEE802.3x (Flow Control)
IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Fiber Connector
SC standard, ST/FC/LCoptional
10/100BASE-T
STP or UTP Category 5/5e/6 cable (Max. 100m)
100BASE-FX
50/125um, 62.5/125um multimode fiber cable (2Km)
9/125um singlemode fiber cable (20/40/60/80/100/120Km)
Conversion Mode / Delay Time
Store-and-Forward < 10us, straight-through<0.9us
Flow control
Full duplex-flow control, Half duplex-back pressure
MTBF
50,000 hours
RJ-45 Port
Auto-MDI/MDIX

Dimensions
Card-inside155mm*128mm*32mm
Inner-power:140mm*110mm*30mm
External-power:95mm*70mm*25mm

Weight
Card-inside:1.0KG
Inner-power:0.6KG
External-power:0.4KG
Input Voltage
DC5V1A with External power adapter (TA)
Input Voltage
AC100 ~ 240V / 50-60HZ (OM)
Wavelength
1310nm / 1550nm
Power Consumption
<2.5W
BER
<1/1000000000
Operation Temperature
0~50
Storage Temperature
-40~70
Storage Humidity
5%~90% non-condescending
MAC Address Table
1K
Buffer Size
1M
Order information:
Part No.
Fiber Type
Wavelength
(nm)
Distance
(km)
Transmission rate
YDMC-3302E-D20
SM Dual Fiber
1310
0-20
10/100M
YDMC-3304E-D40
1310
0-40
YDMC-3306E-D60
1310
0-60
YDMC-3308E-D80
1550DFB
0-80
YDMC-3309E-D110
1550DFB
0-110
YDMC-3305E-D02
MM Dual Fiber
850/1310
0-2
YDMC-3312E-S20
SM Single Fiber
1310T/1550R
0-20
YDMC-3313E-S20
1550T/1310R
YDMC-3314E-S30
1310T/1550R
0-30
YDMC-3315E-S30
1550T/1310R
YDMC-3314E-S40
1310T/1550R
0-40
YDMC-3315E-S40
1550T(DFB)/1310R
YDMC-3316E-S60
1310T/1550R
0-60
YDMC-3317E-S60
1550T(DFB)/1310R
YDMC-3318E-S80
1310T/1550R
0-80
YDMC-3319E-S80
1550T(DFB)/1310R
YDMC-3320E-S100
1310T/1550R
0-100
YDMC-3321E-S100
1550T(DFB)/1310R
Note:
E: external power supply;
I: internal power supply;
C: card plug in
R: card rack mount;
D:dual fiber (duplex)
S: single fiber (simplex);
33: 10/100M;

1PC/BOX,50PC/CARTON


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: 10/100/m Fiber Media Converter, Dual Fibe

GOLD Member
Oct-16-24
Buyer From Grossmehring, Germany, Croatia
GOLD Member
Mar-28-23
Supplier From Dhaka, Dhaka, Bangladesh
 
Introducing the KARAM PN 361 Energy Absorbing Forked Webbing Lanyard, the ultimate safety equipment for those working at heights. Designed to keep workers safe from falls, this lanyard is made from high-quality materials and features an innovative energy-absorbing design.

The lanyard is made from strong and durable webbing material, which is designed to withstand heavy loads and extreme conditions. The forked design allows for easy attachment to both the harness and the anchorage point, ensuring a secure connection and maximum safety.
GOLD Member
Jun-06-24
Supplier From Hui Zhou, Guang Dong, China
 
Application
Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment.

Cable Structure & Features
Conductor Material : Tinned copper stranded
Insulation : Semi-Rigid PVC
Drain Wire : Tinned copper stranded
Shielding : Aluminium foil laminated screen
Outer Sheath ; PVC
Sheath Colour : black or gray

Technical Data
Standard : UL Style 2464
Approvals : UL apporoved
Rated Voltage : 300V
Testing Voltage : 1500V
Flame Retardant : VW-1
Insulation Resistance : Min 20Mx km
Min. Bending Radius : 10 x cable diameter
Operating Temp. : -30C / +80C
Dec-28-11
Supplier From Hsinchu, Taiwan
VERIFIED
Jun-22-13
Supplier From Baltimore, Maryland, United States
 
Submarine communications and telecommunication.
VERIFIED
Feb-24-18
Supplier From Foshan, Guangdong, China
 
Product Characteristic

>Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use

>Inside the cable fixtures, splice and clamps

>Fully enclosed, protecting

>Suitable for outdoor armored, indoor soft cable

>Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack

>Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties

>Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame

>Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room.

 communication engine room, jumping fiber, cable and splice one access the essential equipment

Technical parameters

>Several coupled interfaces

>Compact Optical is used for fiber splice, optical adjustment, cable protection and so on

>The height 1U is suitable for Cabinet or rack

>Conform to ISO/IEC11801 standards

-
Oct-29-09
Supplier From Karachi, Sindh, Pakistan
 
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members.

Features & Application

òExcellent optical, mechanical & environmental performance
òHigh strength-to-weight ratio
òCSM dielectric type û Fiber Reinforced Plastic
òDry block construction
òHigh tensile strength
òHigh crush strength
òCorrosion resistance
òKINK resistance
òVery light weight
òVery flexible & small bending radius
òLong haul / backbone application
òJunction communication systems
òAll dielectric applications
òCATV applications.

Construction Parameters

Fiber Count 02 û 144 Fibers
Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Second (Outer) Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Oct-29-09
Supplier From Karachi, Sindh, Pakistan
 
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members.

Features & application

Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type û fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.

Construction Parameters

Fiber Count As per CustomerÆs Requirement
No. of Loose Tube As per CustomerÆs Requirement
G.655 As per CustomerÆs Requirement
G.652 As per CustomerÆs Requirement
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP)
Armoring Corrugated Steel Tape Armoring
Peripheral Strength Member (if required) Aramid / Glass Yarn
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Outer Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Oct-29-09
Supplier From Karachi, Sindh, Pakistan
 
Product description

This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings.

Features & application

Excellent optical, mechanical & environmental performance
Csm dielectric type û fiber reinforced plastic
High tensile strength
High crush strength
Aerial application
Application in lan, wan, especially in ftth networks
Easy to clamp and install
Can bear ice loads and high wind pressures.

Construction Parameters

Fiber Count 02 to 12 Fiber
Fiber Type G.652.D
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm
Nominal Cable Delivery Length (km) 2 KM + 3% .

Mechanical Characteristics

Tensile Strength (N) 600
Tensile Strength (N) (Installation) 1000
Crush Strength (N) 2,000
Minimum Bending Radius (mm) 75
Temperature Operating Range -10 to +70¦C.

Verification Status