Magnetic Cylinder

The component on print-cylinder-shaft have been finely grinded to reach high accuracy and fineness.
Hcr guarantee its print-cylinder-shaft¡¯s dimension and common difference in line with the machine manufacturer required parameter.

Wooden case

1.Use high quality tool steel imported from europe. By vacuum heat treatment the hardness can reach to 60 ¡§c 62 rockwell .
2.The outer circle accuracy, body and shaft of roller within the scope of 3 micron, ensure concentric roundness when working and enhance roller service life.
3.Each anvil --roller equipped with an gear according to the design requirements of machine manufacturers. The precision machining and anti-rust treatment is one of key for normal operating of the roller.

Wooden box

Pneumatic double acting non-magnetic cylinder used for automation process.

Our website: alsafegascylinders point com
I'm shirly bai. You can write me to the following address: shirlybai at alsafegascylinders point com

Outside surface treatment: transparent painting
Thread: 3/4-16unf
Valve: cga870, cga870-1, cga870-2
Form a, form e avaliable.
Features:
èmade by aluminum 6061;
è40% lighter than steel cylinders;
èno magnetism;
èhigh corrosion resist and special inner surface treatment, ensure medical oxygen clean and smelless, ideal for medical oxygen storage;
èstable performance;
èwidely used in hospitals, rescue stations, home oxygen therapy, etc.
èchoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.

Quality & safety
1. We have established the quality guarantee system according to the requirements for boiler and pressure vessel manufacturing licensing of china and obtained the certificate issued by general administration of quality supervision, inspection and quarantine of the p.R.C (aqsiq), qualified to manufacture b1 and b3 grade pressure vessels.

2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (tuv, csei for example) before mass production, including bend test, drop test, hydrostatic test, etc. According to relevant standards.

3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.

4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.


Plastic net, carton and pallet

Our website: alsafegascylinders point COM
I'm Shirlybai, just write me to the following address: shirlybai at alsafegascylinders point COM
Product Name: Beverage CO2 gas cylinder
Manufacturer: Liaoning Alsafe Technology Co., Ltd.
Specification: LW-203-13.4-15-H
Standard: ISO7866 or DOT 3AL
Certificate: CE, TS
Third party Inspectors: TUV, CSEI, SGS
Filling content: Food grade CO2
Color: Aluminum
Outside surface treatment: Transparent painting
Thread: 1.125-12UNF
Valve: QF-35C
Form A, Form E avaliable.
Features:
¡¡èMade by aluminum 6061;
¡¡è40% lighter than steel cylinders;
¡¡èNo magnetism;
¡¡èHigh corrosion resist and special inner surface treatment, ensure beverage gas clean and smelless, ideal for food grade CO2 storage;
¡¡èStable performance;
¡¡èWidely used in Beer systems, Carbonated beverage machines, etc.;
¡¡èChoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.

Quality & Safety
1. We have established the quality guarantee system according to the Requirements for Boiler and Pressure Vessel Manufacturing Licensing of China and obtained the certificate issued by General Administration of Quality Supervision, Inspection and Quarantine of the P.R.C (AQSIQ), qualified to manufacture B1 and B3 grade pressure vessels.

2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (TUV, CSEI for example) before mass production, including bend test, drop test, hydrostatic test, etc. according to relevant standards.

3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.

4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.

plastic net, carton and pallet

Our website: alsafegascylinders point com
I'm shirly bai, you can write me to the following address: shirlybai at alsafegascylinders point com
Product name: beverage co2 gas cylinder
Manufacturer: liaoning alsafe technology co., ltd.
Specification: lw-203-20.0-15-h
Standard: iso7866 or dot 3al
Certificate: ce, ts
Third party inspectors: tuv, csei, sgs
Filling content: food grade co2
Color: aluminum
Outside surface treatment: transparent painting
Thread: 1.125-12unf
Valve: qf-35c
Form a, form e avaliable.
Features:
¡¡èmade by aluminum 6061;
¡¡è40% lighter than steel cylinders;
¡¡èno magnetism;
¡¡èhigh corrosion resist and special inner surface treatment, ensure beverage gas clean and smelless, ideal for food grade co2 storage;
¡¡èstable performance;
¡¡èwidely used in beer systems, carbonated beverage machines, etc.;
¡¡èchoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.

Quality & safety
1. We have established the quality guarantee system according to the requirements for boiler and pressure vessel manufacturing licensing of china and obtained the certificate issued by general administration of quality supervision, inspection and quarantine of the p.R.C (aqsiq), qualified to manufacture b1 and b3 grade pressure vessels.

2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (tuv, csei for example) before mass production, including bend test, drop test, hydrostatic test, etc. According to relevant standards.

3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.

4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.

Plastic net, carton and pallet

Our website: alsafegascyinders point COM
I'm Shirly Bai.You can write me to the following address: shirlybai at alsafegascylinders point COM

Filling content: Medical oxygen
Color: green head or customed
Outside surface treatment: Transparent painting
Thread: 3/4-16UNF
Valve: CGA870, CGA870-1, CGA870-2
Form A, Form E avaliable.
Features:
¡¡èMade by aluminum 6061;
¡¡è40% lighter than steel cylinders;
¡¡èNo magnetism;
¡¡èHigh corrosion resist and special inner surface treatment, ensure medical oxygen clean and smelless, ideal for medical oxygen storage;
¡¡èStable performance;
¡¡èWidely used in hospitals, rescue stations, home oxygen therapy, etc.
¡¡èChoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.

Quality & Safety
1. We have established the quality guarantee system according to the Requirements for Boiler and Pressure Vessel Manufacturing Licensing of China and obtained the certificate issued by General Administration of Quality Supervision, Inspection and Quarantine of the P.R.C (AQSIQ), qualified to manufacture B1 and B3 grade pressure vessels.

2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (TUV, CSEI for example) before mass production, including bend test, drop test, hydrostatic test, etc. according to relevant standards.

3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.

4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.

plastic net, carton and pallet