Large Forging Hydraulic Press

Large forging hydraulic press Y13-800 1000 1600 2000 3150 tons mainly used in metal materials of free forging process, such as: upsetting, punching, horse bar reamer, wrong move, coarse turn, cutting, bending, drawing out, etc. Can add special used for ring blank system hole's device, punching device.
Hydraulic system has multiple overload protection, oil temperature alarm, oil level alarm protection automatic protection device, electrical system USES mature PLC control, to ensure the safety of the equipment and the operator. Work under pressure cylinder are made big flow charging valve and drop tank at the same time for liquid, will be able to realize the rapid filling oil, oil compensating, improve the oil return, effectively save forging auxiliary time, improve the efficiency of forging. Equipment installation have reliable cooling circulatory system, and can steadily control temperature rise to ensure that the system is safe and reliable operation.

Our hydraulic presses is a kind of large size hot forging open die hydraulic presses, used to normal work such as upset, elongate...We have variety of capacity :800 ton, 1250 ton, 1600 ton, 2000 ton, 2500 ton, 3150 ton, 4000 ton, 5000 ton.

Our Y81 series hydraulic metal baling presses are drived by fully hydraulic power. This baling presses are mainly used in compressing the scattered plastic black and non-ferrous metal plates. It is very convenient for transportation and smelting. The baling presses adopted the electro hydraulic driver. They can be operated in both manual and automatic control modes. The operation is convenient and the performance is reliable. The mode of baling is side push. The baling block can be transported directly, so it will omit the porterage.--rogerweimail(at)sina(dot)com---

The technical features are as below:
1.the density of baling block is 2 T/M according to the requirement in third grade in conformity with GB4223-84 recycle Carbon Scrap Steel Category&Technique Terms.
2.the hydraulic station adopted the entirety type valve block, and its volume is small, and realize the partial non-pipe design, and it decrease the leakage.
3.the control valve adopted lishile series valves, changeover is stable and flexible, and noise is low.
4.optimizing the system design, assuring the oil temperature is not less than 55
5.the machine is driven by hydraulic system, and the electric system is automatically controlled by PLC.Controling is stable and modification is convenient.
6.the machine can be laid in the flattening concrete floor, and it needn't be made the foundation.
7.The discharge mode includes turn bag, push bag, fore push bag.

We has been specialized in manufacturing Open die forging hydraulic presses, Close die forging hydraulic presses, Forging manipulators, Ring rolling mills, High speed forging units and other hydraulic presses for many years.

Nominal capacity 24Mpa 16000 KN
30Mpa 20000 KN
Plunger diameter of main cylinder 920mm
Return capacity 2000kN
Daylight 3100 mm
Max. slider working stroke 1400 mm
Center distance between columns 2400x1500 mm
Size of movable working table 4000x1500mm
Capacity of movable working table 630kN
Load of movable working table 40 ton
Stroke of movable working table 2000 mm
Slider speed
speed at approach 250 mm/s (adjustable)
working speed 68 mm/s
return speed 250 mm/s (adjustable)
Moving speed of working table 200 mm/s (adjustable)
Power of main motor 1320kW (12x110 kW)
Height above the floor 8500mm

Application of Uses
Sheet bending
Straightening works
Embossing
Punching, slotting
Shearing
Lowers Cutting Etc.

Hydraulic workshop press ( one column)

Product Feature:
1.The C-body design, whole body cast, high rigid.
2. All hydraulic systems, greater pressure, stable and reliable performance.
3. Rod mechanical limit, under pressure stroke adjustable , positioning accuracy 0.02mm.
4. Downward movement with the fast and Feeding speed£¬the fast forward improve work efficiency£»feeding speeds can be adjusted to protect the mold and improve product quality.
5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.
6.Key and Foot Switch two cycle start modes.
7. Under cylinder can be configured to facilitate part to taken out(Optional).
8. Infrared protection can be configured (Optional).

Technical Parameters:
Theoretical output pressure 30KN(3t)
Rated oil pressure 10Mpa
Max stroke 150mm
Max Opening Height 230mm
Throat Depth 140mm
Fast-forward speed 120mm/s
Feeding speed 10~80mm/s
Return speed 110mm/s
The size of the working table 410 X 280mm
The height of the working table 720mm
Size of the mold mounting hole 32mm
Power of motor 2.2kw
Power(3AC,50Hz)380V
Weight 420kg.

Hydraulic press.