2013 Newest Vascular Doppler

Bf-510 pocket fetal doppler

For this model there is no lcd display to show fhr.
It comes up with a headphone to hear fhr very clearly.
It can work with dry battery or rechargeable battery.
Please find the following specifications:
Ultrasonic frequency: 2.0mhz
Power: 9.0v dry battery or 9.0v recharge battery
Ultrasonic intensity: _10mw/cm2
Work time: 4 hours

Pocket fetal doppler mainly applies to detect the fetal heartbeat rate from the twelfth week

Lcd can display fhr, synchronous fhr signal, battery indicator, volume of sound and alarm indicator accurately

Built-in rechargeable battery can work continuously more than 5 hours

Blue backlight lcd display for use conveniently at night

Automatic power off ( one minute), self-detect function, and alarm function when fhr is out of the normal range or battery power is in shortage

Only 270g, can be carried conveniently with a gallus

Built-in speaker and collocated with earphone jack

2.0mhz probe.

Specifications:
Executive standard: en61266:1995

Ultrasonic frequency: 2.0mhz¡à10%

Ultrasonic intensity: ¡ü10mw/cm2

Comprehensive sensitivity: ¡ý90db

Fhr range: 60--210bpm(¡à2bpm)

Fhr alarm range: ¡ü100bpm or ¡ý160bpm

Isptp: ¡ü0.1mpa

Battery: 9v dry battery (optional for 8.4vni-mh rechargeable batteries and charger)

Maximum audio output intensity: ¡ü1w

Doppler frequency: 100--3000hz

Static continuous working time: ¡ý2h

Automatic dormancy time limit:1 minute

Working temperature: 10-40¡æ

Humidity: ¡ü80%

Atmospheric pressure: 86--106kpa



Packaging collocation:
Single unit dimension: 24cm x 23cm x 12cm gross weight: 1.5kg
20 pcs/carton dimension: 44cm x 36cm x 42cm gross weight: 18kg

Normative collocation: gallus, operation manual, approval certification, warranty card

Operation guide:

Destroy disposable syringe to reject cross infection completely while melting the needle,
Insert the needle into the melting hole, and then press down the syringe gently when the
Needle touches the electrodes inside.

While the needle is being melted, there will be spark and the needle indicator will be
Flashing for about three seconds, which is a normal phenomena;

It has the overheat protection function to protect machine work normally while melting the needle;ozone disinfection function and alarm function when the drawer is full of residue;

The residual liquid in the needle will be vaporized instantly during melting, the ¡°working indicator¡±
Is flashed when melting the needle, which means the needle is being melted and the whole process
Lasts 1-3 seconds;

While cutting the head of the syringe body, insert the syringe into the hole and pull the handle
To cut it off.

The whole process lasts 3 seconds.

Destroy needle specifications 18g---34g



Dealing with the waste residue:

There is a taphole at the bottom, under which there is a rubbish drawer to collect waste residue.

Please clean the rubbish drawer after using some time (usually after melting 50pcs of syringes).

Press the drawer gently at the bottom, which will flick automatically, then clean out the waste
Residueand install again.

Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use.
Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables.

Features:

The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer.

It has use the temperature sensor can automatic regulation of fluid temperature. Infrared detection function can work continuously for 3 to 6 hours; Prompt function: the audible and visual alarm to remind doctor; Design Water-proof. The thermostat inside help the infusion stability, without overheating. BFW-1000£ºHighlight LED display; Can start to warm within 1 minute after switching on.
Temperature range: 28¡æ - 41¡æ ( ¡À1¡æ ) Humidity: 35 ¨C 95 %RH ( Non condensing)
Flow Rate: 1-15ml/min

Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use.
Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables.

Features:

The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer.

It has use the temperature sensor can automatic regulation of fluid temperature. Infrared detection function can work continuously for 3 to 6 hours; Prompt function: the audible and visual alarm to remind doctor; Design Water-proof. The thermostat inside help the infusion stability, without overheating. BFW-1000£ºHighlight LED display; Can start to warm within 1 minute after switching on.
Temperature range: 28¡æ - 41¡æ ( ¡À1¡æ ) Humidity: 35 ¨C 95 %RH ( Non condensing)
Flow Rate: 1-15ml/min

Comes with Inbuilt rechargeable battery and USB Cable.It has lens cover and Lan yard and aluminium sturdy body.