Please click here to check who's online and chat with them.

Fiberglass Duct

(1.3)
Supplier From China
Dec-26-12

Fiberglass duct rodder & snake duct rodder & electric rodder & fiberglass duct rod & duct rodder cable & conduit rodder & cable rodder & push pull rod description:
Duct rodder applies in tow lead-rope through a pipe,it is auxiliary means. Surface smooth and high resilience,so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;When arranges the cable,you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable.

Fiberglass duct rodder technical specifications:

Glass fiber rod diameter
4.5-16mm

Length
1-500m

Working temperature
-40+80

Min Bend Radius
295mm

Breaking tension
4.5T

Glassfiber density
150g/m

1.constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod.

2.Excellent flexibility force.

3.Tensile strength about 500 Kgf.

4.designed for heavy duty applications ensuring greater rigidity and strength, while supporting additional forces without resentment to the multiple curvatures.

5.Wheel assembly for easy transportation.

6.Guide rollers and the right parts for rotary coupling.

7.Rolling bearing cage flotation (reel transport) for mobility should be light and easy to use in the field, including a parking brake for the flexible rod.

8. There is copper wire inside for tracing easily.



Technical data of duct rodders



1. Glass reinforced composite core:

general properties

Property value
keinforcement E-glass fiber
glass content of inner part 75-80%
material of pulling rod epoxy fiber glass(inner) high density polyethylene(outer)
density >1.9gr/cm3
diameter tolerance +/-0.10mm
work situation temperature -40 to +80


Mechanical prperties

property value
minimum pullling strength 4000 N+/-5%
tensile modulus >30000Mpa
consistency of rod 150gr/m +/-5%
flexural modulus >30000M pa
elongation at break 2.5-3%



2. Polyethylene cover

Material:

Medium density polyethylene resin for the insulating and jacketing of telecommunications cables.

property value
tensile strength >15N/mm2
environmental stress & crack resistance >1000 hr.
heat stability OK.
carbon black OK.


packed by plastic woven, or wooden pallet.
Length 0.5-1.5m
Width 0.15-0.5m
Height 0.5-1.5m

File a complaint
Rate This Member
Supplier Of Fiberglass

Recent User Reviews

This user has not received any reviews yet!

Verification Status

 
 
Contact Supplier
Renew

More Items Similiar to: Fiberglass Duct

Oct-19-16
Fiberglass Duct Rods/fiberglass Duct Rods

Fiberglass Duct Rods/fiberglass Duct Rods

(1.1)
$300
MOQ: Not Specified
  Bazhou WanQi Electrical Tools Factory
Supplier From Bazhou, Hebei, China
Supplier Of Fiberglass Products
 
Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
The frames
Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.
Rod selectIon
Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
The size of ducting it is to be pushed through
The distance the rod is to be pushed
The number and tightness of bends in the ducting
If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.
Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod ma
Jan-29-10
Fiberglass duct rod

Fiberglass Duct Rod

(1.3)
Ask for price
MOQ: Not Specified
  Bazhou Huatong Electric Power Product Factory
Supplier From Bazhou, Hebei, China
Supplier Of Fiberglass Products
 
Features and benefits:
Strong non-conductive fiberglass rod construction.
Rustproof bull-nose pulling eye.
For longer conduit runs and underground duct.
Rugged tubular steel reel with adjustable positioning.
Feed device allows rod to feed out or be wound back onto reel with easy push or pull of rod.
Many applications, both commercial and residential.


8pics 300kg 1350*480*1500.
Nov-14-16
Fiberglass Duct Rods

Fiberglass Duct Rods

(1.1)
$150
MOQ: Not Specified
  Wan Qi Electric Power Equipment Factory
Supplier From Bazhou, Hebei, China
Supplier Of Fiberglass Products
 
Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Dec-31-13
Duct rodder, fiberglass duct rodder

Duct Rodder, Fiberglass Duct Rodder

(1.3)
Ask for price
MOQ: Not Specified
  Deli Power Tool Factory
Supplier From Bazhou, Hebei, China
Supplier Of Fiberglass Products
 
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling
7. Anticorrosion , good elasticity , long working life.
Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools

Box
Aug-26-16
4.5mm-16mm Fiberglass Duct Rodder

4.5Mm-16Mm Fiberglass Duct Rodder

(1.0)
$30 - $500
MOQ: Not Specified
  Hebei Long Zhuo Trade Co.,Ltd
Supplier From Shijiazhuang, Hebei, China
Supplier Of Fiberglass
 
Fiberglass duct rodder introduction
Fiberglass duct rodder applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable .
Dec-31-13
Duct rodder, fiberglass duct rodder, duct rod

Duct Rodder, Fiberglass Duct Rodder, Duct Rod

(1.3)
Ask for price
MOQ: Not Specified
  Deli Power Tool Factory
Supplier From Bazhou, Hebei, China
Supplier Of Fiberglass Products
 
Description:
Duct rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance).Duct rodders has time-saving reducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable
Fiberglass duct rodder features&benefits:
1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling
7. Anticorrosion , good elasticity , long working life.
Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools

Box
Sep-20-17
Fiberglass Duct Rodder For Laying The Cable

Fiberglass Duct Rodder For Laying The Cable

(1.0)
Ask for price
MOQ: Not Specified
  Hebei Huaer Trade Co. Ltd.
Supplier From Shijiazhuang, Hebei, China
Supplier Of Fiberglass Products
 
Fiberglass duct rodder is selected as a special tool for pulling electric cables and optical fibre cables in telecom, power industries, buildings and many other fields. The rod is made of fiberglass and high strength resin at high temperature, it is coated by high density polyethylene engineering plastic as its protected layer, which makes the duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, these make it safe for using in cable occupied duct. Along with pull head and handcart, it features easy to move and operate. The Fiberglass duct rodder will be equipped with different size of reels in accordance with the length of the rod, there are wheels on the reel to make it convenient for moving, it is an ideal tool for laying cables
Dec-01-16
Fiberglass Continuous Duct Hunter

Fiberglass Continuous Duct Hunter

(1.0)
$150
MOQ: Not Specified
  Bazhou WanQi Power Tools Factory
Supplier From Bazhou, Hebei, China
Supplier Of Fiberglass
 
Introduction
Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.

We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries.
Product introduction

The rod
Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Oct-19-15
Economic Popular Fiberglass Duct Rod 7mm

Economic Popular Fiberglass Duct Rod 7Mm

(1.1)
$0.10 - $3
MOQ: Not Specified
  Bazhou Dpair Hardware Tools Co., Ltd.
Supplier From Langfang, Hebei, China
Supplier Of Fiberglass
 
Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer, which make duct rodder cover sliding on surface, durable,corrosion resistant and has good insulation performance, which make them safe for using in cable occupied duct. High Density polyethylene(grade: for insulating and jacketing of Telecommunication cables) is used in the outer diameter coating. Duct rodder will be equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving.

Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order
Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice.

Material Fiberglass (inner) and high density polytgtkebe(outer)
Density >1.9gr/cm3
Working temperature - 40 to + 80
Minimum pulling strength 4000 N5%
Tensile Modulus >46.500Mpa
Search More Like "Fiberglass Duct"

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com