Engraving Portable Marking Machine

Laser marking machine for all types of metal.


315 kgs

Basic principles
Computer controls marking-needle to move on traces of pre-edited characters and graphs, meanwhile, to strike materials at a high frequency under the application of compressed air, thereby, to form needed characters and graphs.
Major functions
Software applicable on windows 98/2000/xp/vista platform, has strong editing functions, and easy to use, capable to mark chinese and english characters, arabic numbers and graphs, automatic marking serial numbers, international standard vin codes. The marking head could move 90 degree, suit for different marking requirement.

Product parameters
1. Material: copper
2. Model number: 3-m26
3. Pin hardness: hrc95
4. Pin length: 53mm
5. Pin diameter: 2.5mm
6. Marking depth:0.02-2mm
7. Size of characters:<0.06m
8. Marking speed:3-8characters/s
9. Pneumatic presure:0.2-0.7mpa
Nameplate marking machines with a special classic designed needles, needle cavity, in the case of low pressure over the high frequency vibration to complete 300hz ensure smooth plate clearly marked character; metal plate are more easy to keep in good condition.
Applicability
Nameplate series markers are designed for all types of tag plate. The plate surface can be characters, figures, numbers, letters and also the precise printing with high speed marking, high quality, and beautiful marking lines. Special tooling plate can be achieved with automatic feed printing. Widely used in various types of plate marking.
Features
1. High speed marking
2. The designed fixture could achieve fast clamping
3. Fast positioning, quick access to working state
4. Using high stepping motor, always keep steady status.
5. High frequency stamping made quality marking
6. Low pressure marking reduced noise

1)marking contents:numbers, chinese and english characters, graphs
2)size of characters:adjustable
3)marking depth 0.02-1mm(adjustable, relevant to materials)
4)marking speed 2-5 letters per second according to letter size
5)marking materials:metals or nonmetals with hardness under hrc55
6)marking surface:flat surface (120x80mm, can be change as customer's request)
7)power source ac220v10%50hz
8)pneumatic pressure:0.3-0.7mpa
9)energy consumption:100w(air compressor excluded)
10)repeat precision:0.02-0.05mm
11)work enviroment:regular work environment
12)function introduction: pneumatic marking machine with a rotatable fixture, can mark on workpiece with flat or curved surface, directly mark on the body, base plate, pillar and engine
13)applicable scope:motor industry:mark serial number, manufactural date, name, brand, etc.On pillar, engine and other big and heavy materials
14)major parts:main machine.

1. YAG lamp-pump solid laser device
2. US made laser Q-Switch
3. CE,SGS

Adopting new-type and high-power solid laser with constant pulse output, YAG metal laser marking machine is designed with advanced configurations, such as, imported ceramic pump cavity, new cooling system and photo system. The main technical parameters, namely, beam quality and photoelectric conversion efficiency, reach the advanced world standard.
Strong stability, long continuous working hours, clear, complete and handsome marks, non-contact processing, this ensure the precision and efficiency of working surface.

Supporting self-created character data base and curve arrangement order, barcode font (see 1D and data matrix, PDF417 2d barcodes), linear filling and loop filling. , changeable texts. Contents of changeable texts can be determined by multiple forms: input via keypad and serial number.

Suitable for fields in hardware building materials, spares and parts, electronic product, computer, electric appliance, hardware accessories and instrument, etc.; widely applicable for various metal and rigid plastic materials.

Technical Parameters:
Working area: 100mm, 100mm,
Marking method: Plane ,convex surface
Laser power: 50W,
Marking length: 0.3mm
Repetition precision: 0.0001mm
Min line width: 0.02mm
Min smallest characters: 0.2mm
Highest resolution: 65335
Working temperature: 0-45 degree
Working humidity: 5-95% (non-condensed water)
Pulse frequency: 1-100Hz Continuo and adjustable)

Installation and training:
1. Without sending engineer
Manual and video will be sent to you for training and learning how to install machine.
Internet remove assistance is available 24hrs every day.
2. With engineer
Engineer will be sent to your country for one week, dealing with the installation and training.
User need to take care of tickets, accommodation, food and cooperating with the engineer we dispatch.
3. If you are here
You got 5 days for free training, if you are in our factory. We will learn you any basic information about
the machine.


Stable plywood case.

Fiber Laser Marker

Principle
Fiber laser adopts a fully integrated design and merges all the components into a single fiunctional element. It has no optical power coupling loss and pollution, air cooling. It possesses merits of high efficiency, long lifetime and low maintenance.

Features
Excellent beam quality
The beam quality of GD-FM Series Fiber laser marking machine is better than that of the conventional solid-state laser marking machine. It is output from the base model (TEMOO) and the focused spot size is 10um. And its divergence angle is 1 / 4 of the semiconductor pump. So it is especially suitable for precision and fine marking.

Low utility cost
The maximum photoelectric efficiency is up to 30%. The input power of this equipment is less than 500W which equals to 1/10 of lamp pump YAG laser marker and saves lots of energy consumption expense

Zero maintenance
Lightstar Fiber Laser Marker is maintenance free and unnecessary to adjust or clean lens.

Long lifetime
Fiber Laser Marker adopts laser diodes as pump source, its average working time can reach 100,000 hours.

High processing speed
The processing speed is 2-3 times faster than traditional laser marker.

Applications
Electrical appliances, electronic communications, auto parts, precision metal, jewelry gifts, glasses watches, instrumentsation, and bathroom ware etc

Fiber laser marker specification
Technical parameter
Average output laser power : 5,10 ,20 or 30W (continuous or Pulse)
Laser wavelength : 1064nm
Power adjusting range : 10-100%
Repetitive frequency : 20-100KHz
Beam quality£¨M2£© : 1.4-1.8
Optical-electronic efficiency : 30%
Marking range : 100X100 mm
Marking depth : 0.01-0.2mm
Min focus spot size : 0.01mm
Min. character height : 0.2mm
Repetitive accuracy : ¡À0.001mm
Max. liner marking speed : ¡Ü7000mm/s
Marking format : Figure, word, bar code, 2D, Date, shift, batch no, seri
code, date, order of runs, lot number,
serial number, file chaining
Operating system : Support PLT¡¢DXF¡¢BMP ,SHX, TF library
using SHX¡¢TTF character storage
directly
Dimensions (L*W*H mm) : 550¡Á900¡Á1200
Power requirement : 220V£¬50Hz/60Hz.

Wood packing.

Input powerPlasma:380V Equip:220CModelH&H 1325
Machine power8500WWorking area1300*2500
Cutting speed10m/minFile formatnc, G code
Cutting Thickness0-6mmControlDSP handle
Frequency50HzWorkingNon-contact striking arc
Electric current60AMetalStainless, aluminum, galvanized

Portable sand blast machines are mainly used to clean bigger components on-site, like steel structure, bridge, big tank body, used for big tanks vessel repaire, pipe rust removing at oil field, container renew, etc, and generally used in open, or used in very big blast rooms.

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting.
Portable pressure blasting machines .

4720P, 6230P to be supplied with pressure blast machine fitted with remote control system, abrasive valve, moisture separator, 10 meter remote control hose, 10 meter heavy duty blast hose with nozzle holder, coupling and venturi boron carbide blast nozzle.

6230(2)P to be supplied with two outlets allows two operators to work without interference.


Model:4040P
Diameter (mm):00
Heigh (mm) :1000
Weight (kg) :65
Pot Volume (L):80
Outlet :1
Blast hose ID (mm) :3/4"
Compressed air consumption (m3 /min) :3.5
Woking pressure (bar):5-7
Remote control :Pneu. or elec.
portable or Stationary :portable

Model:4720P
Diameter (mm):600
Heigh (mm) :1450
Weight (kg) :175
Pot Volume (L):270
Outlet :1
Blast hose ID (mm) :1-1/4"
Compressed air consumption (m3 /min) :4.5
Woking pressure (bar):5-7
Remote control :Pneu. or elec.
portable or Stationary :portable

Model:6230P
Diameter (mm):900
Heigh (mm) :1900
Weight (kg) :400
Pot Volume (L):600
Outlet : 1,
Blast hose ID (mm) :1-1/4"
Compressed air consumption (m3 /min) : 4.5;
Woking pressure (bar):5-7
Remote control :Pneu.
portable or Stationary :Stationary

Model:6230(2)P
Diameter (mm):900
Heigh (mm) :1900
Weight (kg) :430
Pot volume (L):600
Outlet : 2,
Blast hose ID (mm) :1-1/4"
Compressed air consumption (m3 /min) : 9
Woking pressure (bar):5-7
Remote control :Pneu.
portable or Stationary :Stationary

Model:6060A
Diameter (mm):600
Heigh (mm) :1200
Weight (kg) :255
Pot volume (L):200
Outlet :1
Blast hose ID (mm) :1/2"
Compressed air consumption (m3 /min) :1.5
Woking pressure (bar):4-7
Remote control :Elec.
portable or Stationary :portable

Parameter : GD-PM 50
Laser output power : 50-100W
Laser wavelength : 1064nm
Beam quality : TEM00 (M2: <1.5)
Pulse width : 5-25ns
Q frequency : 10-80KHz
Marking range : 100X100mm
Optional area : 150*150mm
Min. line width : 0.01mm
Repetitive accuracy : ¡À0.001mm
Marking speed : 1000-3000mm/s
Consumed power : 800W
Electricity requirements : 220V 50Hz/60Hz
System Dimension : 700*600*1300mm
Cooling system : Air cooling.


Wood packing.