Brick Wall Reinforcement Mesh

Concrete Reinforced Mesh is widely used as bridge reinforced mesh, road construction mesh, floor reinforced mesh, trench mesh, Concrete slab mesh, Masonry mesh and brick wall reinforced mesh, which is used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall. It is a type of convenient and economical reinforcement option for modern concrete structures.

Specification of concrete reinforced mesh:
(1)Material:plain steel bar, stainless steel rebar rods.
(2)Steel rods style: ribbed or smooth.
(3)Rebar Diameter: 3 mm - 40 mm.
(4)Mesh shape: square or rectangular .
(5)Distance between rods : 50,100, 150, 200,300, 400 mm.
(6)Mesh sheet width: from 650 mm to 3800 mm.
(7)Mesh sheet length: 850 mm, 6 m, 9 m, 12 m.

Features of concrete reinforced mesh:
(1)High strength.
(2)Anti-crack and anti-shock.
(3)Hot-dip galvanized or epoxy coating after the manufactures
(4)Anti-corrosion, acid-resisting.
(5)Easy to install

Applications of concrete reinforced mesh:
(1)Concrete reinforced mesh is used as bridge reinforced construction and building, like bridge girders, bridge spans, bridge decks.
(2)Concrete reinforcing mesh used in median barriers, tunnel segments, box culverts, airport and wharf.
(3)Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.
(4)Constructional uses: block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.
(5)Used as coal mine supporting mesh for coal mine roadway supporting.

Concrete welded Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets.

The fabric is used to provide tensile strength and crack control to structural concrete elements.

Advantages:
Concrete Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons :

The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management.

The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process.

Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls.
Square Reinforcing Mesh Standard Sheets - 6 m (length) x 2.4 m (width) = 14.4 m²:
REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) EDGE WIRE(mm) MASS(kg)
SL81 7.60@100 7.60@100 7.60@100 105
SL102 9.50@200 9.50@200 9.50@200 80
SL92 8.55@200 8.55@200 8.55@200 65
SL82 7.60@200 7.60@200 7.60@200 52
SL72 6.75@200 6.75@200 6.75@200 40
SL62 6.00@200 6.00@200 6.00@200 33
SL52 4.75@200 4.75@200 4.75@200 21

Rectangular Reinforcing Mesh Standard Sheet - 6 m (length) x 2.4 m (width) = 14.4m².
REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) MASS(kg)
RL718 25*6.75@100 30*7.60@200 68
RL818 25*7.60@100 30*7.60@200 79
RL918 25*8.55@100 30*7.60@200 93
RL1018 25*9.50@100 30*7.60@200 109
RL1118 25*10.65@100 30*7.60@200 131
RL1218 25*11.90@100 30*7.60@200 157

According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh.

Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh.



In accordance with the customer's request.

Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs.

*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm

*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)

*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT

Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile.

*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x (200mm, 300mm, 400mm, or 500mm);
width is dependent on number of wires (3,4, 5, or 6)
Main Wire: 7.60@100, 10.70@100, 11.90@100 mm
Cross Wire: 4.00@300, 4.75@300 mm

*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)

*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT

Concrete reinforcing mesh
1.Wire diameter:3mm-14mm
2.Mesh:5*5cm, 10*10cm, 10*20cm,
20*20cm, 10*30cm, 30*30cm
3.Iso & sgs

Packed with the iron or wooden pallet.

Anping tenglu metal wire mesh co.Ltd

Brick mesh

Brick mesh is a kind of mesh panel dedicated for concrete and it can be divided into two types, one is welded cold-drawn low carbon steel wire and the other is galvanized after welded.

Brick mesh is widely used in the large-area plastering engineering as the plastering underlay, in order to avoid cracking and resist vibrations. The column is made of concrete and has low costs, low intensity and and high stability. The colored coating is corrosion resistant and decorative impression. The brick mesh looks harmonious and beautiful. It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry w all construction

Z248.5/248.6/348.5/Z348.6/Z442.5/Z442.6/Z558.5/Z558.6 Grids and reinforcing meshes
Reinforcing meshes is manufactured compliance with Swiss Standard SIA 16211 S550. It is different sides wire in the whole sheet as K188/K335 in longitudinal direction.
Itâ??s used widely on construction footing foundation,flooring slabs,foundation beams,bridge and piers and tunnel of coal,mine,subway,and trian reinforced and support.
Heyou wire mesh is a professional manufacturer for reinforcing meshes which can comply to Chinese standard ,Australian/New Zealand standard,Germany Standard, Normes Francaises,Swiss Standard, Osterreichische Norm etc. Our factory was approvaled by ISO.All the reinforcing meshes are follow to international standard.We have enough exporting experiences.Our salesman are more than 10years working experience in this fields. Our workers which has strong and skillfull are expert, they produce the reinforcing meshes better than tyro. They made reinforcing meshes has firmly welding spot,accurate wire diameter,mesh space and panel size,clearly ribbed,non rusted.



The specification of reinforcing meshes conformance with Swiss Standard SIA 16211 S550
mesh type Pitch of wires(mm) diameter of wire(mm) Per meter area sqm/m Dimension of Mesh Area of Mesh(sqmm) Mass (kg/sqm) Weight of Mesh(kg)
pL pC dL dC long cross L(mm) B(mm)
K188 6 6 150 150 188 188 5000 2000 10 3.091 30.192
K335 8 8 150 150 335 335 5000 2000 10 5.372 53.72
Z248.5 6/4.5 7 150 150 248 257 5000 2000 10 3.422 34.22
Z248.6 6/4.5 7 150 150 248 257 6000 2000 12 3.472 41.668
Z348.5 7/5.5 8 150 150 348 335 5000 2000 10 4.628 46.28
Z348.6 7/5.5 8 150 150 348 335 6000 2000 12 4.694 56.326
Z442.5 8.0/6.0 9 150 150 442 424 5000 2000 10 5.857 58.57
Z442.6 8.0/6.0 9 150 150 442 424 6000 2000 12 5.94 71.282
Z558.5 8.5/7.5 10 150 150 558 524 5000 2000 10 7.315 73.15
Z558.6 8.5/7.5 10 150 150 558 524 6000 2000 12 7.418 89.014