Weed-Cutting Suction Dreger

TypeYs-350
Total length 36.6m
Hull length26m
Hull depth1.8m
Hull width6m
Main power1000kw
Pump model 16/14g-gh
Suction pump dia400mm
Discharge pump dia350mm
Water flow3000m3h
Dredging depth14m
Discharge distance1000m
Working weight180ton
Spuds pile 450mm
Winch3sets
Delivery time 90days



Completely assembled and fully tested before delivery
1)Simple, rapid assembly and dismantling
2)Free for one set of spare parts
3)Responsible for installation and training of operators in the dredging place
4)One-man operate dredger by programmable logic controller ( plc system )
5)Efficient fuel consumption
6)Spare parts available from stock
7)Transportable by road, rail or sea
8)Airconditioning-vessel standard equipment
9)Wide range of optional equipment available
10)Can be delivered to any location where need dredging
11)Reliable engine capability , dredging pump capability and hydraulic system
12)Fresh water engine cooling system
13)Standard design, allowing early delivery and low price.

Gold pinning dredger
ItemParameter
Capacity100t/h
Floating body19*2*0.9m
Power31kw
Total22.5t
Mud content<10%
Stone content<70%
Dredging depth10m
Water requirement60m3h
Delivery methodIn bulk or container
Delivery time20days.

The JLCSD-150 Cutter Suction Dredger of steel construction, non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area “A” or below the “A”-line specified in code for inland river steel engineering ship manufacture of P.R.China.
The dredger can be used to excavate and transport cohesive sediment below the class ? specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China.
In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc.
It’s hull consists of a main pontoon and two side pontoons, which is to be easy to dismantle or mount for transportation by road, rail or water, and is to be easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the 2 side pontoons serve as fuel bunkers,ballast tanks and storage tanks.
The dredger is powered by diesel engines. The main diesel engine is to drive the dredge pump, and in the free part of the engine, one set of power distributor is equipped, to supply power for all other equipments such as cutter, swing and ladder winches, and the spud rams etc.
The spacious control cabin is ergonomically designed with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only two operators can control all the dredger in the operation room.
The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.

For ship inspection certificate, we can make the following dredgers: 200M3,400m, 3800M3,1200M3,2000M3,3000M3,3500M3,5000M3. The company can make dredgers of the following depth: 2M, 5m, 10m, 15m, 20m, 25m, 35m. The company can make the following transport mileage dredger 100m, 200m, 500m, 800m, 1000m, 1500m, 2000m, 2500m, 3000m. Our Dredger and desilting vessel are customized according to customer's requirements and construction conditions and environment. The product type is different, the product price also can have the different concrete negotiable. The work flow undefined first uses the winch arm rest two test cables and the anchor traction fixed to the two tests to fix the cutter suction dredger with the positioning post behind. The cutter is placed in the underwater mud layer (see figure 2) by operating room button control, the cutter head is rotated, the riverbed mud layer is cut and stirred (see figure 3) , and the mud-water mixture is pumped up through the suction pipe (see figure 5) through the suction pipe (see figure 4) , the mud-water mixture is piped (see figure 6) to the desilting site (see figure 7,8) for desilting.

PTP Working Center
Machine Main Parts:
1. Vacuum dual-zone & double-position design with vacuum suction cups, can achieve fast positioning for diversified customized production.
2. The machine body structure is made of thick-walled welded square steel tube, and with tempering treatment at 5 sides, which ensure the body durable and never deformation.
3. German imported HOMAG-Schmalz countertop can move freely, which is convenient for the processing of different size workpiece. Pneumatic clamps enable the machine to process special shaped or irregular parts too.
4. Taiwan made guide rail and ball screw, high precision, long service lift, good stability.
5. Taiwan planetary reducer, with small volume, large torque, high transmission efficiency and wide range of speed reduction.
6. Centralized automatic lubrication system, can supply oil to the guide rail and ball screw at regular time and rationing, ensuring their service life.
7. Workpiece positioning cylinder guarantee more accurate positioning of each workpiece.
8. Italy HSD numerical control drilling head can finish all drilling on 5 sides of the workpiece upon one time positioning.
9. Carousel automatic tool change system, with 8pcs capacity of tools magazine, need only 8 seconds to change tools freely.
10. Vacuum table can adsorb the entire panel or point-to-point. The entire panel can be processed directly without sawing in advance. Convenient loading and unloading, shorten the auxiliary time greatly.


Performance Features:
1. Be suitable for processing diversified complicated products, with wide rage of functions, including routing, drilling, cutting, side milling, sawing, etc..
2. Break the traditional processing mode, really save time and effort. Make the production get rid of artificial dependence, significantly shorten the production process and processing time.
3. Can be interfaced with panel production line software, is one essential equipment for the customized panel furniture production line.

Applicable:
1. Furniture Industry: panel furniture, office furniture, wooden doors, cabinets.
2. Wood Products: stereo box, game cabinets, computer desks, sewing machines, musical instruments.
3. Panel Processing: insulation materials, plastic parts, chemical parts, PCB, inner body of motor car, bowling track, stairs, anti-Bethe plates, epoxy resin, ABS, PP, PE, etc. carbon mixed compound.
4. Decoration Industry: acrylic, PVC, MDF(density board), artificial stone, organic glass, and other soft-metal sheets made of aluminum or copper.