Condenser

The most powerful commercial condensing boiler in the world, the E-Compact Twist is available in a wide range of outputs of 25kW up to 150kW, and is ideal for business owners who are looking to run a more energy-efficient business. The only condensing pellet boiler in the world with a single heat exchanger, the E-Compact Twist condensing boiler can achieve efficiencies of up to 103%.

Condenser

We have a mandate to sell Gas Condensate

Product introduction
The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. This type of plate is specially designed for optimum condensation. It has an asymmetrical arrangement with a large gap on the steam side and a small gap on the cooling water side. This makes it possible to maintain a very low pressure drop at the steam end while maintaining a certain speed and turbulence on the cooling water side. This maximizes heat transfer efficiency and minimizes fouling.

Plate condensers are specially developed for condensing steam under low pressure or vacuum conditions in evaporation and distillation systems. It can meet a variety of specific applications and capabilities requirements. The steam inlet fitting is large and the two condensate outlets are small. The cooling water fitting is a medium size and is located in the center of the plate.




Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar

Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN700

Plate thickness:0.5mm-1.2mm; Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM

Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.

Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.


Features
Plate condenser
Lower cost
Due to the high heat transfer efficiency, this means less heat exchange area and higher cost efficiency than conventional shell and tube type, especially when stainless steel or titanium is required. The compact design also saves space, thus reducing transportation and installation costs.

Plate condenser
Less fouling
Due to the high strength turbulence created by the specially designed corrugated sheets, there is less fouling on the cooling water side than the shell and tube condenser.

Plate condenser
Easy to clean
The cooling water side is easy to clean, whether in the way of mechanical or chemical.

Plate condenser
Easy to expand
Just add an extra "plate group" in the existing frame.

Plate condenser
Complete counterflow
A greater degree of subcooling of non-condensable gases can be achieved compared to shell and tube equipment. Therefore, the load of the vacuum pump will be reduced.

Range of application
Alumina, food industry, sugar industry, beverage industry, industrial wastewater, etc.

Pushpak Are A Leading Manufacturer Of Heat Exchanger Tubes Cs-ss- Duplex-titanium And Condenser Tubes From Mumbai, India.
Carbon Steel, Stainless Steel , Duplex Steel , Titanium Steel, Cupro Nickle
Sa 179 / 304/316/321/ 347/ Ti Gr. 1 / 2/ 3 /2202/2304 / 90/30 & 70 /30a 210 Gr. A1/c /a 192 /a 334/
Carbon Steel, Stainless Steel , Duplex Steel ,
Titanium Steel, Cupro Nickle

Condenser tube cleaning system
Fqjd is leading suppliers of ctcs and debris filters for power utilities, refineries and process industries with worldwide supply reference of more than 1000 installations, capacities of the units ranging from 2 mw to 1300 mw.
1. World class technology
2. Very high ball recovery
3. Perfect sealing
4. High efficiency
5. Optimal design

Wooden box

Hydraulick condensore pump

We have available hydraulic axial pump & motor in very good condition.If u require this pump & motor u can reply we will quote our best price it's details r as under.
(1) kawasaki bruninghaus, axial pump & motor ,
P/m type : bz 720 - 110 r
Reg.Type : r 1420 rs
No.B : 456480 30 kw
Available : 3 sets
Kawasaki heavy industries ltd., kobe - japan
(2) kawasaki bruninghaus, axial pump & motor
P/m type : bz 725 - 110 r
Reg.Type : r 1420 rs
No.B : 445274
Available : 1 set


N.A.

Mild Steel and Stainless Steel Shell & Tube Condenser with multi-pass for different tonnage required in various processes. Tailor Made Manufacturing.

Titanium equipment
Heat exchanger / condenser/ vessel
U.S. Titanium is a professional manufacturer and supplier located in the united states, who can provide products such as titanium & titanium alloy, zirconium, tantalum, niobium, hafnium and other high performance metals.
In addition u.S. Titanium has formed powerfully strategic partnership agreements with globally renowned titanium industry enterprises so that u.S. Titanium has incomparable advantages to provide the highest quality of titanium products, timely delivery, unlimited contract volume at a competitive price.
Gr2, etc.
Heat exchanger, the condenser etc.