Fiberglass Corrugated Roofing Sheet

Material: High-performance polyester film, unsaturated polyester resin, fiberglass roving and mat
Width: No more than 1500mm
Thickness: 0.6-5mm
Length: 5800mm, 11800mm or customized
Color: Clear, Blue, Green, Red,Opal or customized
Profile:customized

FPR day-lighting board is a daylighting material used with steel structure. It is mainly composed of high-performance coating, reinforced polyester and glass fiber. Among them, the upper film should play a very good anti-ultraviolet and anti-static effect. Because of its stable quality, it is well received by customers. The product can be widely used in industrial/commercial/civil building roofs and walls.

Features are as follows:

1. It has the characteristics of good shatter resistance, easy cleaning, acid and alkali resistance, and easy installation.
2. The product lighting light is astigmatic, the light is soft, the light transmittance is maintained high, and most of the ultraviolet rays can be blocked
3. The product is a flammable material.When a fire occurs, it can quickly burn out the dense smoke in the room, which can reduce the casualties of the fire, and the product does not produce droplets during the combustion process, which can protect the safety of the on-site personnel
4. It maintains stable performance in the temperature range of -40 C to 120C without high temperature softening and high cold embrittlement; it can also be designed as a double-layer structure with better heat preservation effect, especially suitable for winter production in farms in severe cold areas in the north.
5. Shatter resistance, super impact resistance, can block the impact of wind, snow and hail, avoiding nail hole expansion and water leakage.
6. It has corrosion resistance, acid and alkali resistance, and is suitable for roofing of chemical workshops, such as fertilizer plants, electroplating plants, etc.

Also known as grp sheet, which full name is fiberglass reinforced polyester (plastic) sheet. As a new material, greater than that of steel products and aluminum products in specific tenacity. Products in the ultra-low temperature or high temperature will not happen brittle fracture, deformation and to prevent heat transfer. For that, frp is widely used in so many industry.

2.Frp sheet features:
A. High mechanical strength and good impact toughness
B. Roughness surface and easy to clean
C. Corrosion resistance, wear resistance, yellowing resistance, anti- aging
D. High temperature resistance
E. No deformation, low thermal conductivity, excellent insulation properties

The machine made GRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years.

Specification:
Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm
Colors : Clear, sky blue,light green
Profiles : Over 100 general profiles
Length : Cut as per customers requirement
Density: g/cm 2 1.4 to 1.5
Fiber Content : >25%
Light transmission : 60-85%
Applicable temperature : 40 C to 120 C
Application areas:
Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens
Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing
Transportation : Bus station, ticket counters, parcel offices, shelters
Agriculture: Farm house, poultry farms,generator rooms, sheds
Features:
Rust proof
High impact strength
Fire retardant
Light in weight
Resistant to all types of weather
Free from problems of cracking, wraping and buckling.


standard export packing.

The machine made FRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years.

Specification:
Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm
Colors : Clear, sky blue,light green
Profiles : Over 100 general profiles
Length : Cut as per customers requirement
Density: g/cm 2 1.4 to 1.5
Fiber Content : >25%
Light transmission : 60-85%
Applicable temperature : 40C to 120C
Application areas:
Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens
Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing
Transportation : Bus station, ticket counters, parcel offices, shelters
Agriculture: Farm house, poultry farms,generator rooms, sheds
Features:
Rust proof
High impact strength
Fire retardant
Light in weight
Resistant to all types of weather
Free from problems of cracking, wraping and buckling.


standard export packing.

Name

Color Coated Steel Sheet

Standard

AiSi, ASTM, bs, DIN, GB, JIS

Technique

Cold Rolled

Width

1220-2000mm

Color

Standard RAL color:red,bule,white,grey,brick,etc.

Steel Grade

Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,

Thickness

0.11-2.0mm or customer's requirement

Surface Structure

Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS)

Surface Treatment

1. Galvanized
2. PVC,Black and color painting
3. Transparent oil,anti-rust oil
4. According to clients requirement

Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



01. SMOOTHNESS
No composite indentation, no residual stress, no deformation after shearing.
02. DECORATIVE
You can choose a realistic material and aesthetic wood grain, stone coating. Patterns and colors can be customized according to
customer requirements.
03. DURABILITY
Surface paint, high gloss retention, good color stability, minimal change in chromatic aberration, and long service time.
04. STABILITY
The change of wind pressure, humidity and temperature will not cause bending, deformation and expansion. It has strong bending and flexural resistance

The machine made FRP flat panel that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years.

Specification:
Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm
Colors : Clear, sky blue,light green
Profiles : Over 100 general profiles
Length : Cut as per customers requirement
Density: g/cm 2 1.4 to 1.5
Fiber Content : >25%
Light transmission : 60-85%
Applicable temperature : 40C to 120C
Application areas:
Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens
Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing
Transportation : Bus station, ticket counters, parcel offices, shelters
Agriculture: Farm house, poultry farms,generator rooms, sheds

Features:
Rust proof
High impact strength
Fire retardant
Light in weight
Resistant to all types of weather
Free from problems of cracking, wraping and buckling.


standard export packing.

The machine made FRP sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish. Further, the longevity of our range is from 10 to 25 years.

Specification:
Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm
Colors : Clear, sky blue,light green
Profiles : Over 100 general profiles
Length : Cut as per customers requirement
Density: g/cm 2 1.4 to 1.5
Fiber Content : >25%
Light transmission : 60-85%
Applicable temperature : 40C to 120C
Application areas:
Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens
Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing
Transportation : Bus station, ticket counters, parcel offices, shelters
Agriculture: Farm house, poultry farms,generator rooms, sheds
Features:
Rust proof
High impact strength
Fire retardant
Light in weight
Resistant to all types of weather
Free from problems of cracking, wraping and buckling.


Standard export packing.

Technical characteristics of SkyLite polycarbonate awning:
* Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation.
* Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics.
Simple to transport and install, save time in construction and installation.
* Environmentally friendly, safe for users.

High quality factory price galvalume GL corrugated Sheet

Aluminum-zinc corrugated board is composed of aluminum-zinc alloy structure, which is composed of 55% aluminum, 43% zinc and 2% silicon solidified at a high temperature of 600 C. The entire structure is composed of aluminum-iron-silicon-zinc, forming a dense quaternary An alloy of crystals.

The thermal reflectivity of galvanized steel sheet is very high, twice that of galvanized steel sheet, and people often use it as a thermal insulation material.



Material

SGCC,SGCH,G550,DX51D,DX52D,DX53D,DX54D,DX554D,S280GD,S350GD

Standard

JIS-CGCC, JIS-G3312, ASTM-A635, EN-1043, EN-1042,etc.

Surface treatment

1.Galvalume
2. PVC,Black and color painting
3. Transparent oil,anti-rust oil
4. According to clients requirement

Thickness

0.12-6.00mm,or customer's requirement

Width

650-930mm,600-1500mmaccording to customer's requirement

Length

1000mm-12000mm or customized

Tolerance

Thickness: +/-0.02mm, Width:+/-2mm

Processing service

Bending, Welding, Decoiling, Cutting, Punching

Payment term

30% payment by T/T as deposit, the balance 70% before dispatch or received the copy of the BL or 70%LC

Packing

Standard Seaworthy Packing

Spangle

Regular spangle,minimal spangle, zero spangle,big spangle

Price term

CIF CFR FOB EX-WORK

Delivery term

7-15 workdays

MOQ

10 Tons

Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project