- Wrist type hardness tester,
- Easy to read menu with back light
- Large LCD display with back light
- For most metals
- Based on the hardness HL value, convers to HRB, HRC, HV, HB, HS and Tensile strength.
- Impact devices D\DC\DL\C\D+15 and G are available for special applications
- Test at any angle, even upside down
- RS 232 output and internal memory in a bath of 1250 average readings
- Date and time display.
- Lower and upper limits setting with low-high display judge
- High accuracy +/- 0.5%
- Works on standard AAA batteries.
- Auto shutdown after two minutes.
- Conforming to ASTM A 956
The standard delivery are:
Main unit
Small supporting ring
Impact device D
Two AAA batteries
Test block with HLD-value
Software and cable
Carrying case
Operation manual
Cleaning brush
Leather wrist strap
Certificates.
Lx-c durometer meter applied to foam, sponge, shoe materials, such as durometer testing of materials with low hardness. This product is light hg/t2498-93 and other relevant standards.
1. Dial value: 0 ~100hc
2. Needle stroke: 2.5 mm
3. Measure range: 10 ~90hc
4. Needlepoint size: sr 2.5 mm
5. Dimension:115¡¡§¡é60¡¡§¡é25mm
6. Weight: 0.5 kg
Features:
* LCD display of 128 64 matrix is used.
* Hardness scales(HV ,HB,HRC,HRB,HRA,HS).
* RS232 interface and USB to PC
* Max 600 groups impact times:32¡«1 of data can be stored at internal.
* Back light display has been used to make convenient or the user in poor light.
* Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
* Material of cast steel¡± is added HB values can be read out directly when D/DC impact device is used
to measure cast steel¡± workpiece.
* Power is two of AA battery. Continuous working period: approx. 100 h (no back light on).
* Software of PC can be installed according to the requirements of user. The function will be more powerful
to satisfy the more demands of quality control and management.
Product Features;
Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G)
Direct display of hardness scales HRB,HRC,HV,HB,HS,HL;
Software to connect with PC and Dataview for PC operation;
Automatic identification Impact Devices and test direction (Except G);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-Board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li Battery , low voltage indication and sound alarm;
LCD with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
Technical specifications:
Hardness Scale:HL,HRC,HRB,HV,HB,HS
Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value
Standard Impact Device:D
limits set measuring range:(170~960)HLDD Optional Impact
Devices:C DC D+15 DL G
Operating Temperaturee:0~40
Statistics Function:Average Max Min calculation,limits setting and alarm
Testing direction:Automatic
Min.thickness of hardened:0.8mm
Chargeing time:3~5hours
Power:Li Battery 4.2V/1600mAh
Charger:5V/500mA
Overall Dimensions:147*69*23mm
Weight:186g
Computer Interface:RS232
Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G)
memory:240~1000 groups
Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling
Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece
Hardnesss:996HV (D DC D+15 DL C) 646HB (G)
Continuous Working Time:About 200hours
Wide measuring range, for all metallic materials
Direct display of hardness scales hrb, hrc, hv, hb, hs, hl
Conversion to tensile strength (u.T.S.)
Test at any angle, even upside down
Removable printer included
Six impact devices are available for special applications
Large lcd display showing all functions and parameters
Battery low indication
New function of software calibration
Power charging indication on the keyboard led
Fault distinguish in details
1, each durometer type is made to a specific scale (i. E.A, c, d) and is capable of producing a value between 0and 100. Shore a is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials. Shore d is designed for plastics, formica, epoxies and plexiglass.
2, it meets standards: din 53505, iso 868, iso 7619, astmd 2240, jisk7215.
3, used the exclusive micro-computer lsi-circuit and crystal time base to offer high accuracy measurement.
4, digital display gives exact reading with no guessing and errors.
5, can communicate with pc for reading, printing and analyzing by the optional software and cable for rs232c interface.
6, automatic power off to conserve power.
7, use operation stand of optional parts can get good accuracy and repetitiveness due to constant measurement force to eliminate the errors caused by artificially applied different force.
Six impact devices are available for special applications(d, dc, d+15, c, dl, g)
Direct display of hardness scales hrb, hrc, hv, hb, hs, hl;
Software to connect with pc and dataview for pc operation;
Automatic identification impact devices and test direction (except g);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li battery , low voltage indication and sound alarm;
Lcd with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
The shore hardness tester as-120 series including type(a, b, c, d, e, o, do, oo), model complete, with different probe size, use for different measured objects and hardness value, to meet different request for kinds of material hardness measure. integrated design, small volume, light weight, simple structure, easy to use, intuitive readings and automatic shutdown function.
with low battery alarm indicator & average value calculation function.
auto switch off and manual shutdown.
use usb data output with connection pc.
provide bluetooth data output choice.
Accuracy1h
Resolution:0.1h
Range:1090h
Operating temperature:040°c
Size:170x63x24 mm
Power supply2x1.5vaaa um-4 battery
Weight:310 g (not including batteries)
Advantage:
1.Machine with self-checking function,the turret will automatically checking turret position right or not and calibrated automatically when tun-on machine.
2. Adopted 4.3 inch touch screen, new advanced design for operation interface
3. With HV&HKscale & hardness conversionfunction
4. Digital eyepiece with encoder, D1, D2 data no need manual input to machine, easy operation
5. USB interface, test result can be save to u-flash directly.6. Menu structure interface, all data can display on screen
6. One-time cast aluminum shell, structure more stable.
7.Car painting technology, looking more decent and bright.
8. Reserved optical path for add CCD cameraand connect with PC (optional function)
9. OK/NG judgement function
Application:
1.Widely used to test the hardness of all kinds of metal materials (steel, nonferrous metals, tinsel, cemented carbide, sheet metal, etc.)
2. surface layer / coating (Carburization, nitriding, decarburization layer, surface hardening layer, galvanized coating, etc.)
3. Glass, chip, ceramic, plastic and rubber, etc.
Specifications:
1.Hardness Scaleï¼?HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1
2.Test forceï¼?10, 25, 50, 100, 200, 300, 500, 1000gf
3.Loading:Automatic loading - dwell - unloading test force
4.Turret:Automatic turret
5.Magnification:10X Digital eyepiece; 10X, 40X Objective lens
Total magnification: 100X (observation), 400X (measuring)
6.Indenter:Standard Micro Vickers diamond indenter 136°±0.5°
7.Dwell time:1-99s (unit: 1 second)
8.Data storage:Yes, turn-off machine memory will automatic save
9.Data output:Built-in printer; U-flash (USB interface)
10.Data display:4.3 inch digital touch screen
11.X-Y table:Size: 100x100mm; Max. Move range: 25x25mm
12. Standards:GB/T4340, ASTM E384 & E92, EN-ISO 6507, JIS B-7734
Features:
Easy one handed operation
Digital Display
Compact body for areas of restricted space
Slim detector allows measurements to be taken on complex curved surfaces such as welds, moulds etc, as well as conventional flat surfaces
Conversion function for different hardness scales
Self calibrating
Supplied with NAMAS certified test piece
Used in any direction
Lightweight, portable and easy to carry
Using large-screen 128 * 64 dot matrix LCD module, information abundant and intuitive.
Can be pre-set limit, hardness, when beyond the scope it automatic alarm, convenience customers batch test.
English display: menu type operation, uses simple and convenient.
