* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
Bonny Valve has very extended experience in manufacturing of Floating Ball Valves
Size ½ inch up to 10 inch (DN 15 up to DN 250)
½" to 10" 150#
½" to 8" 300#
½" to 4" 600#
½" to 1 ½" 900#, 1500# & 2500#
Pressure Rating: ASME 150# to 2500#
Materials: Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc.
Seating: Soft Seated (PTFE/RPTFE /PEEK/NYLON/DEVLON) and Metal Seated
End Connection: Flanged RF/RTJ, BW, FNPT & SW Ends
Operator: Lever/Wrench, Gear Operated
Specification & Standards:
Design API 6D / API 608 / BS5351 / ASME B16.34
Face to Face ASME B16.10
End Flange ASME B16.5
BW End ASME B16.25
Test API598/API6D
Fire Safe Test â API607/API6FA
Special NACE MR-01-75
Features:
Two Piece or Three Piece
Bore Type Reduced Bore or Full Bore
Anti- Static Device
Blow- Out Proof Stem
Fire Safe Design
Low Emission
Design Standard: API 6D, ASME B16.34, API 608, BS 5351, MSS SP-72
Face to Face: API 6D, ASME B16.10, EN 558
End Connection: ASME B16.5, ASME B16.25
Inspection and Test: API 6D, API 598
Design Features
Full port or reduced port
Floating ball design
Blow out-proof stem
Casting body or Forged body
Fire safe design to API 607/ API 6FA
Anti-static to BS 5351
Cavity pressure self relief
Optional locking device
1) Size: 1/4~4"
2) Working pressure: 1.6-6.4mPa
3) Temperature range: -29�°C ~ 150�°C ~ 260�°C
4) Suitable medium: water, oil, air, some corrosive liquid
5) Thread type: G, NPT, BSPT, RC,BSP, DIN259/2999
6) We can also manufacture similar products according to your special requirements.
